Qtab Q100 dead alive by great merapi Tool

[mrgsm123]

Qtab q100 dead by xyz tool alive by great Merapi Tool here is log

Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM29)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6582_S00
EMMC: (28Gb+4096Mb) KSI 0x4d4d43303447
EMMC FW VERSION: 58:00:00:00:00:00:00:00
BOOT STYLE : EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : DA USB VCOM Port (COM30)
Starting flash.
Send preloader...
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
EBR2 checksum is executing ...
ANDROID checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
FAT checksum is executing ...
After flash this firmware need to perform some aditional steps
1.Reinsert battery, keep VOL- and power on untill phone will come in factory mode
2.Select line EMMC, and after press home button.
3.Wait untill phone will restart and will stuck on logo(leave for 1 min in this stage).
4.If phone not power on, reinsert battery and perform direct unlock.
If repair fail, please contact us or report in forum to provide help.
Wait untill phone will start charging.
All done.

working fine now