S7582 MTK6575 bin file flash write problem - GSM-Forum

zeerik · 04-21-2015, 15:06

hi
read bin flash file with volcano from working same s7582 mtk 6575 but unable to writ proccess stuck at this point .......when recived set was hang on samsung logo after wrote masud 100% sectter file set totaly dead now

AniAxn · 04-21-2015, 15:09

Hello ..

Use Volcano Android Tool to Read/Write Bin File ..!!
Do Again read/write with Android Tool ..!

Wbr,
AniAXN

zeerik · 04-21-2015, 16:16

same with android tool

zeerik · 05-03-2015, 10:39

Merapi also fail to write flash

with volcano tool same proble and with merapi also same problem ......

FullFlashPak · 05-03-2015, 11:36

Quote:

Originally Posted by zeerik

Merapi also fail to write flash

with volcano tool same proble and with merapi also same problem ......

Brother Just a Wait
We are Chack mtk6571,6575,6577 .
i HOPE NEXT COMING UPDATE IF FACE PROBLEM SURE FIXED.

BUT BEFROE WE ARE CHACK STEP BY STEP ALL CPU.

DNTWORRY

Regard

Umesh_Arora · 05-03-2015, 16:27

not any problem bin read write in volcano, load file is mismatch
post working phone read flash screenshot

see 6575 emmc write success

nand flash 6575 success

http://forum.gsmhosting.com/vbb/f723...o-box-1710644/

merapi tool write success

zeerik · 05-04-2015, 05:37

Quote:

Originally Posted by zeerik

hi
read bin flash file with volcano from working same s7582 mtk 6575 but unable to writ proccess stuck at this point .......when recived set was hang on samsung logo after wrote masud 100% sectter file set totaly dead now

Quote:

Originally Posted by zeerik

Merapi also fail to write flash

with volcano tool same proble and with merapi also same problem ......

sir 1st file is back up of working same cpu phone and 2nd file back up its own when it was dead i read flash and try to write but not writing hang on this...........when i recived set was hang on logo i flashed it with masud 100% tested file

after thie set totaly dead not accept secter file nor bin

aliyousafzai · 05-04-2015, 06:07

its seems firmware versions not same .....................

try this firmware
http://www.4shared.com/rar/wytCDC58c...s_First_m.html

blacky199 · 05-04-2015, 07:10

no volcano work perfectly on most of the emmc mtk only got problem in some nand chip's

Umesh_Arora · 05-04-2015, 07:31

Quote:

Originally Posted by zeerik

sir 1st file is back up of working same cpu phone and 2nd file back up its own when it was dead i read flash and try to write but not writing hang on this...........when i recived set was hang on logo i flashed it with masud 100% tested file

after thie set totaly dead not accept secter file nor bin

problem in your phone not in volcano

try to full format your phone

intelp3 · 05-04-2015, 08:23

me too face this problem bro.when i write this file with volcano box its hang on just flash writing.
but when i flashed it same file with an other tool its complete successful flashed.

zeerik · 05-04-2015, 10:02

Quote:

Originally Posted by aliyousafzai

its seems firmware versions not same .....................

try this firmware
GT-S7582 MT6575 World's First modified by masud - Download - 4shared

bro with this file i already flashed and hence the sety is dead now

zeerik · 05-04-2015, 11:11

Quote:

Originally Posted by Umesh_Arora

problem in your phone not in volcano

try to full format your phone

after full format with flash tool try to write flash with merapi get this error

Error: S_DA_DRAM_NOT_SUPPORT

log

Flash files count is :13
Action : Firmware update.
Selected Samsung Clone: S4(MT6572)
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM8)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6575_S01
EMMC: (29Gb+0Kb) TOSIBA 0x303034473930
EMMC FW VERSION: 10:00:00:00:00:00:00:00
BOOT STYLE : EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : MediaTek DA USB VCOM Port (COM10)
Starting flash.
Error: S_DA_DRAM_NOT_SUPPORT
Wait untill phone will start charging.
All done.

FullFlashPak · 05-04-2015, 12:09

Error: S_DA_DRAM_NOT_SUPPORT proble is hardware problem or used wrong preloader.

amn32 · 05-04-2015, 12:31

Quote:

Originally Posted by zeerik

after full format with flash tool try to write flash with merapi get this error

Error: S_DA_DRAM_NOT_SUPPORT

.

As brother umesh said , Format full flash ,add format address manually ,
After format success write back working file of same cpu same flash id .

04-21-2015, 15:06	#1 (permalink)
zeerik No Life Poster Join Date: May 2006 Location: Sambrial (Sialkot) Posts: 2,698 Member: 282066 Status: Offline Sonork: 100.1590696 Thanks Meter: 569	S7582 MTK6575 bin file flash write problem hi read bin flash file with volcano from working same s7582 mtk 6575 but unable to writ proccess stuck at this point .......when recived set was hang on samsung logo after wrote masud 100% sectter file set totaly dead now

05-03-2015, 16:27	#6 (permalink)
Umesh_Arora No Life Poster Join Date: Aug 2012 Location: India Age: 39 Posts: 4,591 Member: 1792140 Status: Offline Sonork: 100.1618782,gaba Thanks Meter: 6,087	not any problem bin read write in volcano, load file is mismatch post working phone read flash screenshot see 6575 emmc write success nand flash 6575 success http://forum.gsmhosting.com/vbb/f723...o-box-1710644/ merapi tool write success Last edited by Umesh_Arora; 05-03-2015 at 16:46.

04-21-2015, 15:09	#2 (permalink)
AniAxn Product Supporter Join Date: Jun 2009 Location: eMMC & UFS Posts: 4,600 Member: 1045758 Status: Offline Sonork: 100.1613661(Offline) Thanks Meter: 4,307	Hello .. Use Volcano Android Tool to Read/Write Bin File ..!! Do Again read/write with Android Tool ..! Wbr, AniAXN

04-21-2015, 16:16	#3 (permalink)
zeerik No Life Poster Join Date: May 2006 Location: Sambrial (Sialkot) Posts: 2,698 Member: 282066 Status: Offline Sonork: 100.1590696 Thanks Meter: 569	same with android tool

05-03-2015, 10:39	#4 (permalink)
zeerik No Life Poster Join Date: May 2006 Location: Sambrial (Sialkot) Posts: 2,698 Member: 282066 Status: Offline Sonork: 100.1590696 Thanks Meter: 569	Merapi also fail to write flash with volcano tool same proble and with merapi also same problem ......

05-04-2015, 06:07	#8 (permalink)
aliyousafzai No Life Poster Join Date: Aug 2010 Location: kpk _PAK Posts: 1,928 Member: 1358184 Status: Offline Sonork: 100.1616912 Thanks Meter: 615	its seems firmware versions not same ..................... try this firmware http://www.4shared.com/rar/wytCDC58c...s_First_m.html

05-04-2015, 07:10	#9 (permalink)
blacky199 No Life Poster Join Date: Sep 2013 Location: India Posts: 2,005 Member: 2030192 Status: Offline Thanks Meter: 1,334	no volcano work perfectly on most of the emmc mtk only got problem in some nand chip's

05-04-2015, 08:23	#11 (permalink)
intelp3 Freak Poster Join Date: Nov 2006 Location: front of computer Age: 44 Posts: 197 Member: 398035 Status: Offline Thanks Meter: 51	me too face this problem bro.when i write this file with volcano box its hang on just flash writing. but when i flashed it same file with an other tool its complete successful flashed.

05-04-2015, 12:09	#14 (permalink)
FullFlashPak No Life Poster Join Date: May 2008 Location: hall road pakistan Posts: 9,397 Member: 782530 Status: Offline Thanks Meter: 8,136	Error: S_DA_DRAM_NOT_SUPPORT proble is hardware problem or used wrong preloader.