spd 6600l booting problem but with dragon ok why?? [SOLVED] - GSM-Forum

joni_rajpura · 04-04-2012, 15:36

2012-04-04 20:03:32 >>
2012-04-04 20:03:35 >>Internal version: Spreadtrum Boot Block version 2.0
2012-04-04 20:03:35 >>Boot downloading...
2012-04-04 20:03:36 >>CPU TYPE:SC6600L [66007001]
2012-04-04 20:03:36 >>FLASH ID:00EC225400000000
2012-04-04 20:03:36 >>FLASH ID:00EC225400000000
2012-04-04 20:03:36 >>Temporary does not support this flash.
2012-04-04 20:03:37 >>Please change Boot or reduce Baudrate, try it again.

.::ARD::. · 04-04-2012, 20:32

please kindly post the screenshot, i can't see clearly with ur log
what boot that already used and etc...?

regard,

DH-GSM · 04-05-2012, 02:35

set Baudrate 115200.try again.

MumbaiGsm · 04-05-2012, 04:44

Quote:

Originally Posted by joni_rajpura

2012-04-04 20:03:32 >>
2012-04-04 20:03:35 >>Internal version: Spreadtrum Boot Block version 2.0
2012-04-04 20:03:35 >>Boot downloading...
2012-04-04 20:03:36 >>CPU TYPE:SC6600L [66007001]
2012-04-04 20:03:36 >>FLASH ID:00EC225400000000
2012-04-04 20:03:36 >>FLASH ID:00EC225400000000
2012-04-04 20:03:36 >>Temporary does not support this flash.
2012-04-04 20:03:37 >>Please change Boot or reduce Baudrate, try it again.

this is the fact...in dragon no need to change baudrate or boot...
simply single klik works to detect and format ..
where as here too many process to perform same operation by volcano..

and B'cause of that i used to first try on dragon...if not work then VOLCANO

As i Know Work in Progress ....so no more comments...
MORE POWER TO VOLCANO

WBR...

avtarkaint · 04-05-2012, 04:54

yes yesterday i face same problem, easily detected on dragon but not on volcano.

joni_rajpura · 04-05-2012, 05:08

i also try to reduce budrate but same and i select 6600l boot from list

joni_rajpura · 04-05-2012, 05:45

Uploaded with ImageShack.us

.::M Irfan::. · 04-05-2012, 07:03

can you please click on read flash instead of read info??

waiting for your result with screen shot.

br

sony8755 · 04-05-2012, 07:24

same probhlum my.
012-04-05 11:24:32 AM >>Please change Boot or reduce Baudrate, try it again.
2012-04-05 11:32:41 AM >>Volcano Updated: 2012-04-01
2012-04-05 11:32:41 AM >>Connecting...
2012-04-05 11:32:43 AM >>Connection successful,connected state!
2012-04-05 11:32:43 AM >>Version: V3.8
2012-04-05 11:32:43 AM >>SN:014-805-762
2012-04-05 11:32:43 AM >>Port:COM8
2012-04-05 11:33:34 AM >>For many phones, charge pins need to be set in order to identify USB devices.
2012-04-05 11:33:35 AM >>Detecting D+ and D-...
2012-04-05 11:33:35 AM >>Vcc: 3
2012-04-05 11:33:35 AM >>Gnd: 11 12
2012-04-05 11:33:35 AM >>Detection initiated...
2012-04-05 11:33:36 AM >>D+ = 5, D- = 4
2012-04-05 11:33:36 AM >>Detection D+/D- with 1.16 seconds.
2012-04-05 11:33:36 AM >>Continue to detect BOOT pin...
2012-04-05 11:33:40 AM >>Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
2012-04-05 11:33:40 AM >>BOOT(Pull Down) = 7
2012-04-05 11:33:40 AM >>Detection completed.
2012-04-05 11:33:47 AM >>Setting pinouts...
2012-04-05 11:33:59 AM >>Pinout setting complete.
2012-04-05 11:34:21 AM >>Available Ports:COM1 COM8 COM9
2012-04-05 11:34:21 AM >>Detection initiated...
2012-04-05 11:34:21 AM >>Vcc: 3
2012-04-05 11:34:21 AM >>Gnd: 11 12
2012-04-05 11:34:21 AM >>Analyzing D+ and D-...
2012-04-05 11:34:23 AM >>D+ = 5, D- = 4
2012-04-05 11:34:23 AM >>Detection D+/D- with 1.16 seconds.
2012-04-05 11:34:23 AM >>Continue to detect BOOT pin...
2012-04-05 11:34:28 AM >>Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
2012-04-05 11:34:28 AM >>BOOT(Pull Down) = 7
2012-04-05 11:34:28 AM >>Setting...
2012-04-05 11:34:31 AM >>Find USB device:SCI USB2Serial (COM9), (VID_1782&PID_4D00)
2012-04-05 11:34:31 AM >>Pinouts setting complete!
2012-04-05 11:34:31 AM >>
2012-04-05 11:34:32 AM >>
2012-04-05 11:34:34 AM >>Internal version: Spreadtrum Boot Block version 2.0
2012-04-05 11:34:34 AM >>Boot downloading...
2012-04-05 11:34:35 AM >>CPU TYPE:SC6600L [66007001]
2012-04-05 11:34:35 AM >>FLASH ID:0001227E22102201
2012-04-05 11:34:35 AM >>Flash Type:[SPANSION] S71PL064
2012-04-05 11:34:35 AM >>Size:0x800000(8MB)
2012-04-05 11:34:36 AM >>Please change Boot or reduce Baudrate, try it again.
2012-04-05 11:34:45 AM >>Detection initiated...
2012-04-05 11:34:46 AM >>Vcc: 3
2012-04-05 11:34:46 AM >>Gnd: 11 12
2012-04-05 11:34:46 AM >>Analyzing D+ and D-...
2012-04-05 11:34:56 AM >>D+ = 5, D- = 4
2012-04-05 11:34:56 AM >>Detection D+/D- with 3.84 seconds!
2012-04-05 11:34:56 AM >>Analyzing USB device, please wait...
2012-04-05 11:35:10 AM >>Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
2012-04-05 11:35:10 AM >>Setting...
2012-04-05 11:35:14 AM >>Find USB device:SCI USB2Serial (COM9), (VID_1782&PID_4D00)
2012-04-05 11:35:14 AM >>Pinouts setting complete!
2012-04-05 11:35:14 AM >>
2012-04-05 11:35:14 AM >>
2012-04-05 11:35:16 AM >>Internal version: Spreadtrum Boot Block version 2.0
2012-04-05 11:35:16 AM >>Boot downloading...
2012-04-05 11:35:18 AM >>CPU TYPE:SC6600L [66007001]
2012-04-05 11:35:18 AM >>FLASH ID:0001227E22102201
2012-04-05 11:35:18 AM >>Flash Type:[SPANSION] S71PL064
2012-04-05 11:35:18 AM >>Size:0x800000(8MB)
2012-04-05 11:35:18 AM >>Please change Boot or reduce Baudrate, try it again.
2012-04-05 11:35:49 AM >>Detection initiated...
2012-04-05 11:35:50 AM >>Vcc: 3
2012-04-05 11:35:50 AM >>Gnd: 11 12
2012-04-05 11:35:50 AM >>Analyzing D+ and D-...
2012-04-05 11:35:51 AM >>D+ = 5, D- = 4
2012-04-05 11:35:51 AM >>Detection D+/D- with 1.16 seconds.
2012-04-05 11:35:51 AM >>Continue to detect BOOT pin...
2012-04-05 11:35:56 AM >>Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
2012-04-05 11:35:56 AM >>BOOT(Pull Down) = 7
2012-04-05 11:35:56 AM >>Setting...
2012-04-05 11:36:00 AM >>Find USB device:SCI USB2Serial (COM9), (VID_1782&PID_4D00)
2012-04-05 11:36:00 AM >>Pinouts setting complete!
2012-04-05 11:36:00 AM >>
2012-04-05 11:36:00 AM >>
2012-04-05 11:36:00 AM >>Temporary does not support this guide to read the information function
2012-04-05 11:36:09 AM >>Detection initiated...
2012-04-05 11:36:10 AM >>Vcc: 3
2012-04-05 11:36:10 AM >>Gnd: 11 12
2012-04-05 11:36:10 AM >>Analyzing D+ and D-...
2012-04-05 11:36:11 AM >>D+ = 5, D- = 4
2012-04-05 11:36:11 AM >>Detection D+/D- with 1.16 seconds.
2012-04-05 11:36:11 AM >>Continue to detect BOOT pin...
2012-04-05 11:36:16 AM >>Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
2012-04-05 11:36:16 AM >>BOOT(Pull Down) = 7
2012-04-05 11:36:16 AM >>Setting...
2012-04-05 11:36:20 AM >>Find USB device:SCI USB2Serial (COM9), (VID_1782&PID_4D00)
2012-04-05 11:36:20 AM >>Pinouts setting complete!
2012-04-05 11:36:20 AM >>
2012-04-05 11:36:20 AM >>
2012-04-05 11:36:20 AM >>Temporary does not support this guide to read the information function
2012-04-05 11:36:22 AM >>Detection initiated...
2012-04-05 11:36:23 AM >>Vcc: 3
2012-04-05 11:36:23 AM >>Gnd: 11 12
2012-04-05 11:36:23 AM >>Analyzing D+ and D-...
2012-04-05 11:36:24 AM >>User stop
2012-04-05 11:36:24 AM >>Pinouts are not fonud!
2012-04-05 11:36:30 AM >>
2012-04-05 11:36:30 AM >>
2012-04-05 11:36:45 AM >>Please change Boot or reduce Baudrate, try it again.
2012-04-05 11:36:54 AM >>Clearing pinouts...
2012-04-05 11:36:55 AM >>Clearing pinouts complete!
2012-04-05 11:37:06 AM >>Detecting rx and tx...
2012-04-05 11:37:07 AM >>Vcc: 3
2012-04-05 11:37:07 AM >>Gnd: 11 12
2012-04-05 11:37:07 AM >>Detection initiated, connect the phone and power on it...
2012-04-05 11:38:21 AM >>User stop

dragonlog
Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
D-=4 D+=5
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM7
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=354762048362005
IMEI 2=354762048362013
Failed to get address of NV.
Read FS info...done

joni_rajpura · 04-05-2012, 08:38

Quote:

Originally Posted by .::M Irfan::.

can you please click on read flash instead of read info??

waiting for your result with screen shot.

br

can we make contect vaya team viewer

joni_rajpura · 04-05-2012, 09:04

yes working good when reading flesh file see but what about info ????????
and after reding file didnt ask me to save file ?????

Uploaded with ImageShack.us

.::M Irfan::. · 04-05-2012, 09:24

read info have bugs, but no matter, you can read flash, write flash, format without single problem.

now go to C/ programe files/ volcano team/ , and check there will be a file named temp_06 or temp_08,

just rename that file with your phone model.

that is your readed file, you can use it.

br

joni_rajpura · 04-05-2012, 10:34

hope that bugs fixed soon by volcano team

hozy_b · 04-05-2012, 15:12

is problem ka koi solution hai

.::jagdeep-Gupta::. · 04-05-2012, 18:51

Quote:

Originally Posted by hozy_b

is problem ka koi solution hai

ALREADY GIVEN ANSWER MY BRO THEN WHY ASKING SAME QUESTION

wbr

04-04-2012, 15:36	#1 (permalink)
joni_rajpura No Life Poster Join Date: May 2007 Location: uk Posts: 2,642 Member: 508072 Status: Offline Thanks Meter: 1,621	spd 6600l booting problem but with dragon ok why?? [SOLVED] 2012-04-04 20:03:32 >> 2012-04-04 20:03:35 >>Internal version: Spreadtrum Boot Block version 2.0 2012-04-04 20:03:35 >>Boot downloading... 2012-04-04 20:03:36 >>CPU TYPE:SC6600L [66007001] 2012-04-04 20:03:36 >>FLASH ID:00EC225400000000 2012-04-04 20:03:36 >>FLASH ID:00EC225400000000 2012-04-04 20:03:36 >>Temporary does not support this flash. 2012-04-04 20:03:37 >>Please change Boot or reduce Baudrate, try it again. Last edited by .::M Irfan::.; 04-05-2012 at 10:58.

04-05-2012, 09:04	#11 (permalink)
joni_rajpura No Life Poster Join Date: May 2007 Location: uk Posts: 2,642 Member: 508072 Status: Offline Thanks Meter: 1,621	yes working good when reading flesh file see but what about info ???????? and after reding file didnt ask me to save file ????? Uploaded with ImageShack.us Uploaded with ImageShack.us

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
NHE_8 wont work with NHEK5689.dll v3	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	07-23-1999 15:48
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

04-04-2012, 20:32	#2 (permalink)
.::ARD::. Product Supporter Join Date: Dec 2011 Location: Indonesia / Guangzhou Age: 38 Posts: 5,036 Member: 1705891 Status: Offline Sonork: 100.1604564 Thanks Meter: 8,139	please kindly post the screenshot, i can't see clearly with ur log what boot that already used and etc...? regard,

04-05-2012, 02:35	#3 (permalink)
DH-GSM Junior Member Join Date: Aug 2006 Posts: 19 Member: 338009 Status: Offline Thanks Meter: 3	set Baudrate 115200.try again.

04-05-2012, 04:54	#5 (permalink)
avtarkaint No Life Poster Join Date: Feb 2007 Location: COOLSAND CPU Posts: 1,844 Member: 452162 Status: Offline Sonork: 100.1592470 Thanks Meter: 440	yes yesterday i face same problem, easily detected on dragon but not on volcano.

04-05-2012, 05:08	#6 (permalink)
joni_rajpura No Life Poster Join Date: May 2007 Location: uk Posts: 2,642 Member: 508072 Status: Offline Thanks Meter: 1,621	i also try to reduce budrate but same and i select 6600l boot from list

04-05-2012, 05:45	#7 (permalink)
joni_rajpura No Life Poster Join Date: May 2007 Location: uk Posts: 2,642 Member: 508072 Status: Offline Thanks Meter: 1,621	Uploaded with ImageShack.us

04-05-2012, 07:03	#8 (permalink)
.::M Irfan::. No Life Poster Join Date: Apr 2006 Location: Al-Ahsa Saudi Arabia Age: 35 Posts: 5,046 Member: 253510 Status: Offline Sonork: 100.1672352 Thanks Meter: 3,534	can you please click on read flash instead of read info?? waiting for your result with screen shot. br

04-05-2012, 09:24	#12 (permalink)
.::M Irfan::. No Life Poster Join Date: Apr 2006 Location: Al-Ahsa Saudi Arabia Age: 35 Posts: 5,046 Member: 253510 Status: Offline Sonork: 100.1672352 Thanks Meter: 3,534	read info have bugs, but no matter, you can read flash, write flash, format without single problem. now go to C/ programe files/ volcano team/ , and check there will be a file named temp_06 or temp_08, just rename that file with your phone model. that is your readed file, you can use it. br

04-05-2012, 10:34	#13 (permalink)
joni_rajpura No Life Poster Join Date: May 2007 Location: uk Posts: 2,642 Member: 508072 Status: Offline Thanks Meter: 1,621	hope that bugs fixed soon by volcano team