SPD 8810/6820 dead after format Volcano version 3.0.0

[hacenedc]

phone info ornes
model: s9082

Detection initiated...
Vcc: null
Gnd: 7
Analyzing D+ and D-...
D+ = 4, D- = 3
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM11), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),4m(modem),3840k(fixnv),3840k(backupfixnv),512 0k(dsp),3840k(runtimenv),10m(boot),10m(recovery),2 10m(system),176m(userdata),60m(cache),256k(misc),1 m(boot_logo),1m(fastboot_logo),3840k(productinfo), 512k(kpanic),512k(simlock),10m(intmemory)
Analysis flash internal data successfully.
Set to Factory successfully.

[naveedsialkoti]

if u have same mobile then u can live first fone

[hacenedc]

uploadfromtaptalk1428410351289.jpguploadfromtaptalk1428410351289.jpg

Envoyé de mon SM-G800H en utilisant Tapatalk

need full flash or backup any help are welcom

[hacenedc]

Originally Posted by naveedsialkoti

if u have same mobile then u can live first fone

i dont have any backup or same phone

if you have it on hand please read full flash

i posted image of phone

[zeerik]

Originally Posted by hacenedc

phone info ornes
model: s9082

Detection initiated...
Vcc: null
Gnd: 7
Analyzing D+ and D-...
D+ = 4, D- = 3
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM11), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),4m(modem),3840k(fixnv),3840k(backupfixnv),512 0k(dsp),3840k(runtimenv),10m(boot),10m(recovery),2 10m(system),176m(userdata),60m(cache),256k(misc),1 m(boot_logo),1m(fastboot_logo),3840k(productinfo), 512k(kpanic),512k(simlock),10m(intmemory)
Analysis flash internal data successfully.
Set to Factory successfully.

sir there is a little thing to note may be you disconnected set before the RUN button (which was STOP ) turns RUN ? you only see Factory successfully and disconnected ? in this case security area can be damaged and set may be hang or dead now you need to search same flash file if you have no backup

[blacky199]

what is the condition before format
{team always advice to take backup}
post screen shot for better instruction

try cft calibration if not success

try with 2.7.2 or 2.5.9 format option

post result with screen shot

[hacenedc]

Originally Posted by blacky199

what is the condition before format
{team always advice to take backup}
post screen shot for better instruction

try cft calibration if not success

try with 2.7.2 or 2.5.9 format option

post result with screen shot

befor flash phone ask for shematique
and after flash hang only on logo
format also withe 2.9.9
same result phone hang on logo

[blacky199]

ashk schematique i can't understand it
try with good flash file and try with old 2.7.2 and 2.5.9

[Damosco]

Originally Posted by blacky199

ashk schematique i can't understand it
try with good flash file and try with old 2.7.2 and 2.5.9

He whant to say that phone was pattern lock(gmail account)

[Akhtar Ali Jatt]

Sorry For Inconvenience ,
Now You need To Flash Your Mobile With Good Bin Or pac file .

[hacenedc]

Tnx for replay but I can't find any good bin any one have this phone on hand can read dumb and upload it tnx again for who replay

Envoyé de mon SM-G800H en utilisant Tapatalk