spd android fdl2 rebuilding/ editing

[viniicell]

is it possible to create own fdl2 files for new not supported phones when all available or backup generated fdl2 files are resulting in errors for correct flashing on dead phones? to have working..*Pac [researchDownloader]

can full flash bin writing be updated so it can be able to write 512mb flash files bins without this below error?

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 00AD00BC90555600
Flash Type:[Hyundai] NAND_HY27UT088G2A
FLASH LEN:0x20000000
Please read the phone partition.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.

i have adb cmd backed up to sdcard a working tecno p3 but i still can not flash it to dead/hanging p3.[no fastboot] because there is no compatible fdl2 files.

ro.build.id=MocorDroid2.3.5_Trout
ro.build.display.id=6820_2.3.5_gc925_jyz_mt11_v12
ro.build.version.incremental=6820_2.3.5_gc925_jyz_ mt11_v12
ro.build.display.internal.id=6820_2.3.5_gc925_jyz_ mt11_v12
ro.build.version.internal=6820_2.3.5_gc925_jyz_mt1 1_v12
ro.build.display.hardware.id=V1.1.0
ro.build.version.hardware=V1.1.0
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=Mon Feb 10 16:06:54 CST 2014
ro.build.date.utc=1392019614
ro.build.type=user
ro.build.user=eric
ro.build.host=eric-desktop
ro.build.tags=test-keys
ro.build.product=hsdroid
ro.build.description=sprdroid_base-user 2.3.5 MocorDroid2.3.5_Trout 6820_2.3.5_gc925_jyz_mt11_v12 test-keys
ro.build.fingerprint=sprd/sprdroid_base/hsdroid:2.3.5/MocorDroid2.3.5_Trout/6820_2.3.5_gc925_jyz_mt11_v12:user/test-keys

NAND device: Manufacturer ID: 0xad, Chip ID: 0xbc (Hynix NAND 512MiB 1,8V 16-bit)
Good Block: 4038 Bad Block: 0 Reserved Block: 58
dev: size erasesize name
mtd0: 00040000 00020000 "spl"
mtd1: 00080000 00020000 "2ndbl"
mtd2: 00040000 00020000 "params"
mtd3: 00080000 00020000 "vmjaluna"
mtd4: 00a00000 00020000 "modem"
mtd5: 003c0000 00020000 "fixnv"
mtd6: 003c0000 00020000 "backupfixnv"
mtd7: 00500000 00020000 "dsp"
mtd8: 003c0000 00020000 "runtimenv"
mtd9: 00a00000 00020000 "boot"
mtd10: 00a00000 00020000 "recovery"
mtd11: 0f500000 00020000 "system"
mtd12: 08700000 00020000 "userdata"
mtd13: 03c00000 00020000 "cache"
mtd14: 00040000 00020000 "misc"
mtd15: 00100000 00020000 "boot_logo"
mtd16: 00100000 00020000 "fastboot_logo"
mtd17: 003c0000 00020000 "productinfo"
mtd18: 00080000 00020000 "kpanic"
mtd19: 00080000 00020000 "simlock"
mtd20: 00a00000 00020000 "intmemory"

i have good 512mb bin file and good adb back -up. i need solution how to write the good files to the bricked phones[ 3 bricked p3 tecnos]