SPECIAL POST For SC6531 - Must See EVERYONE Before Operating SC6531 !

[Moiz Khan]

SC6531 CORRECT WAY OF OPERATION

Please Follow these Instructions (To avoid making your handset DEAD)

(For safety purpose i am telling to do with 2.3.9 version, otherwise i'll advice you to use any version)

REMEMBER : THIS TUTORIAL IS FOR SC6531 SINGLE-IC


STEP I

* Direct Read Flash File with VolcanoTool 2.3.9 version, and

STEP II

* Select Readed Flash File, then Direct Format Handset.




AFTER THIS CHECK YOUR HANDSET. PRESS POWER BUTTON FOR 2 MINUTES ATLEAST.
(MANY CASES SOLVED AFTER THIS)

AND IF YOUR HANDSET GOT DEAD, Then Go to Step 3.


STEP III

* Select Readed Flash File, and Write to the Handset.




HANDSET WILL GET POWERED ON AGAIN.


Tip : Also Read Flash File with Latest VolcanoTool version.

[Moiz Khan]

If Phone Dead after Format Then How to Solve

Please Follow these Instructions (To solve your problem)

(For safety purpose i am telling to do with 2.3.9 version, otherwise i'll advice you to use any version)

REMEMBER : THIS TUTORIAL IS FOR SC6531 SINGLE-IC

STEP I

* Select Readed Flash File with VolcanoTool 2.3.9 version, and Write it.

STEP II

* Tick "Read IMEI & Password" and press RUN button.

YOU WILL SEE PHONE CODE. NOTE IT DOWN.

AFTER THIS POWER ON YOUR HANDSET. PRESS POWER BUTTON FOR 2 MINUTES ATLEAST.

STEP III

* "Reset Factory Settings From Phone Menu" (Enter Readed Code when asked)


YOUR PROBLEM WILL GET SOLVED

[Moiz Khan]

FLASHING TUTORIAL FOR SC6531 DUAL-IC

Please Follow these Instructions (To solve your problem)

(For safety purpose i am telling to do with 2.3.9 version, otherwise i'll advice you to use any version)

THIS TUTORIAL IS FOR SC6531 DUAL-IC

STEP I

Connect Handset and Direct Read Flash File with VolcanoTool 2.3.9 version.

STEP II

(Check the size of Readed file)

If the size of readed file is 8mb, then
Set the 'FLASH SIZE' Manually to 8mb and Read File again.(You'll get 16mb file now)

OR

If the size of readed file is 16mb, then
Set the 'FLASH SIZE' Manually to 16mb and Read File again.(You'll get 32mb file now)

OR

If the size of readed file is 32mb, then
Set the 'FLASH SIZE' Manually to 32mb and Read File again.(You'll get 64mb file now)


STEP III

The File you readed is perfect one.Check This Post for Further Operations -

>> DUAL-IC OPERATIONS <<


YOUR PROBLEM WILL GET SOLVED

[Moiz Khan]

Originally Posted by la5tni9ht

ok what should i do to make the phone powered on, if the handset is dead after (read flash) using Volcano Ver ( 2.5.4 ) . Ty

i mean it dead after making the 1st step .
what should i do to make it powered on . ty

Originally Posted by kuljindersaini

bu my phone is dead after reading flash file with latest version and write file but not solve

problem now what can i do

Latest version is having some bug which will be removed in next version.
Your solution now is to try write that file with 2.3.9
if not get ok...then read flash from working phone with 2.3.9
and write into this handset.


bR.

Originally Posted by shama

ok but problem handset we get same problem?

Your solution is -
read flash file with 2.3.9.
select readed file and write it back.
tick "Read IMEI & Password" and press RUN.
you will get code..note it..and go to phone settings

Reset FACTORY DEFAULTS and enter that code.

problem will get solved.


bR.

Originally Posted by husainsarfraz

But Many time read flash file Not Good
After reading file Not show Save Option file size missing like that tow type size 4mb or 8mb what is actual size 95% set dead

First thing - This tutorial is for Single Flash-IC

To know Actual size,Use this thread for Dual Flash-IC

Second Thing - See this Thread if SAVE Option not comes after Reading file


bR. Smk

[Qaisar Mahmood]

Also some Spd 6531 dead after format ...
in this case write readed backup 6531 backup.phone comes in original status before format after do again format phone comes in working condition

BR
Qaisar Mahmood

[s.rahman]

Originally Posted by Moiz Khan

FLASHING TUTORIAL FOR SC6531 DUAL-IC

Please Follow these Instructions (To solve your problem)

(For safety purpose i am telling to do with 2.3.9 version, otherwise i'll advice you to use any version)

THIS TUTORIAL IS FOR SC6531 DUAL-IC

STEP I

Connect Handset and Direct Read Flash File with VolcanoTool 2.3.9 version.

STEP II

(Check the size of Readed file)

If the size of readed file is 8mb, then
Set the 'FLASH SIZE' Manually to 8mb and Read File again.(You'll get 16mb file now)

OR

If the size of readed file is 16mb, then
Set the 'FLASH SIZE' Manually to 16mb and Read File again.(You'll get 32mb file now)

OR

If the size of readed file is 32mb, then
Set the 'FLASH SIZE' Manually to 32mb and Read File again.(You'll get 64mb file now)


STEP III

The File you readed is perfect one.Check This Post for Further Operations -

>> DUAL-IC OPERATIONS <<


YOUR PROBLEM WILL GET SOLVED

Thanks bro nice post

[aukonline]

I have dual ic but cant flash show this

[Moiz Khan]

Originally Posted by aukonline

I have dual ic but cant flash show this

Please see the dual-ic flash procedure.

Read correct file..then only write.
OTHERWISE HANDSET WILL GO DEAD.


bR.

[maiga73]

I had 1 sc6531 dual sim 16mb dead no backup I flashed with the single sim's Flash file worked but many features are not working turned the screen upside down some on help me with 2sims flash file

[venusmobilecare]

dear bro plzzzzzzzzzz help me yaar after format set dead sc6531 8mb flash file file i dont have backup but as ur instruction i read dead file backup and write file with vol tool 2.4.4 and format but set still dead plzzz give solution or give me flash file pzzzz

[leventc]

Originally Posted by Qaisar Mahmood

Also some Spd 6531 dead after format ...
in this case write readed backup 6531 backup.phone comes in original status before format after do again format phone comes in working condition

BR
Qaisar Mahmood

ı same problem Mr.Qaisar Mahmood please help me my phone working only flash read but no power phone dead
B:R

http://forum.gsmhosting.com/vbb/f723...-dead-1794451/

[porush]

plz send me the link for x098 4 mb flash file......