How to unlock: A1033CPR from Claro

[BackSlash_cu]

????

[BackSlash_cu]

Problem solved 50%

now I can detect the pinout, USB selecting D+/D- MSTAR

BUT when I press Set Pinout, appears the new COM Port: 62, but the phone restart itself, and then there's no more COM 62.

any clue?

thanks

[sweet4hamza]

Post screen shot , and are sure this have mstar CPU on side

[BackSlash_cu]

Originally Posted by sweet4hamza

Post screen shot , and are sure this have mstar CPU on side

The CPU is MTK, MT6250a

Volcano detect the pinout, but when I press Set Pinout, after see the new COM Port, the phone restart itself.

what should I do?

[sweet4hamza]

please post volcano screenshot for better help

[BackSlash_cu]

First, detection, looks ok



then, when the port it's set. Appears but dissappear in less than a sec. Remember, the phone power off and then show battery charging.



solution????

[sweet4hamza]

after this
go in mtk tab
untick mark auto-detect pinouts
tick mark usb mode
click on read flash file
press run
when software ask for plug usb
then
just unplug volcano counter from phone and plug again
it will be start reading flash file


try this and post result

[Umesh_Arora]

go to mtk tab
select boot 5.1232
tick read flash
untick auto detact pinout
tick usb mode
run
then phone insert usb cable (with battry)

[BackSlash_cu]

Originally Posted by umesh gaba

go to mtk tab
select boot 5.1232
tick read flash
untick auto detact pinout
tick usb mode
run
then phone insert usb cable (with battry)

WOW!

THANKS, works........ reading flash now


BTW.....I need to unlock it. what's now?

[sweet4hamza]

Read flash file
And click on anilyzed code
And give it your readied file
It will show your code

[BackSlash_cu]

Originally Posted by sweet4hamza

Read flash file
And click on anilyzed code
And give it your readied file
It will show your code

Thanks
Fine, but show me only User Code (1234) not NCK Code 8 Digits.

what's now?

[sweet4hamza]

Try on Mtk new platefrom and select rsa phones, and then select any model and read codes

[Umesh_Arora]

first mobile soldering tx rx
go to detact tab
select mtk
press detact and set pinout
after detact go to main mtk tab
click new mtk 1.01 platform
after open new platform go again detact tab and set pinout again
go again new platform
press info and press power
your code 100% appear
br
umesh gaba

[BackSlash_cu]

Originally Posted by umesh gaba

first mobile soldering tx rx
go to detact tab
select mtk
press detact and set pinout
after detact go to main mtk tab
click new mtk 1.01 platform
after open new platform go again detact tab and set pinout again
go again new platform
press info and press power
your code 100% appear
br
umesh gaba

Will be cool, but there's no rx or tx on the board

[BackSlash_cu]

Originally Posted by umesh gaba

first mobile soldering tx rx
go to detact tab
select mtk
press detact and set pinout
after detact go to main mtk tab
click new mtk 1.01 platform
after open new platform go again detact tab and set pinout again
go again new platform
press info and press power
your code 100% appear
br
umesh gaba

Nice, I manage to solder all the cables, and voila!, at last, Pinout detected and set, but no unlock
I select the BOOT manually, v5.1232, but nothing happend.

when I go to new plaform v1.01, and press power on, doesn't detect the phone.

what to do?