volcano team nedd help my box cannot pinfind usb pinouts

[r-jcomm]

i tried with boot key without boot keys but no response

here is screenshot of volcano



while other boxes find pinouts easily

here is gpg screenshot




here is gsm Alladin screenshot



here is mirracle box screenshot



team please help me how can i solve this problem . how can i resolve this matter

thanks in advance

br

[r-jcomm]

give me solution as soon as
i will b thankfull
br

[Qaisar Mahmood]

check Volcano box out put Supply.

BR
Qaisar Mahmood

[r-jcomm]

Originally Posted by Qaisar Mahmood

check Volcano box out put Supply.

BR
Qaisar Mahmood

yes brother output supply working good

[r-jcomm]

output working fine

short vcc and gnd



reading another phone by rx tx



powering phone



br

[kuljindersaini]

check jig cable and try with other cable

[Dipendra Pathak]

In some case,

Open your Volcano Box again, find the VCC from "Charge Pin" as shown below:

Now, You can find Vcc from here. If not, try number 1 for VCC (generally), Volcano has already shown GND 5.


For, D+/D- normally it is 3 and 2 in case of 5 pin jig.


First find "Charge Pin" then, detect other pinout. 101% works from Volcano Box.


Br
Dipendra Pathak

[r-jcomm]

ok brother dipendra pathak let mei check and tell u

[r-jcomm]

@ Dipendra Pathak

i tried with ur method but not succeed while its also working in spd phone

[yusufkota]

me also same faces this problem
other box working good with mtk usb but with volcano always faces problems

[sweet4hamza]

for 625a and 6260 you did not need find pinouts , you can do fast work by usb cable only without find any boot key
more easy methood of usb flasher then other tools
its works like 1,2,3

if you have any problem by usb then tell us , or if need i can give you video to do it

[r-jcomm]

Originally Posted by Dipendra Pathak

In some case,

Open your Volcano Box again, find the VCC from "Charge Pin" as shown below:

Originally Posted by Dipendra Pathak

Now, You can find Vcc from here. If not, try number 1 for VCC (generally), Volcano has already shown GND 5.

For, D+/D- normally it is 3 and 2 in case of 5 pin jig.

First find "Charge Pin" then, detect other pinout. 101% works from Volcano Box.

Br
Dipendra Pathak

i tried ur method with two more phones but not sucessful still same problem

[r-jcomm]

Originally Posted by sweet4hamza

for 625a and 6260 you did not need find pinouts , you can do fast work by usb cable only without find any boot key
more easy methood of usb flasher then other tools
its works like 1,2,3

if you have any problem by usb then tell us , or if need i can give you video to do it

i know in mt625A and 6260 work with usb cable easily and fast but in 6252 and 6253 and other chip sometime we need to set pinouts with jig . if u have solution for my problem then share here it will be appreciated . but the main factor is that when other boxes doing pinfind with jig why volcano cannot find any pinouts?

br