VolcanoBox 2.9.9 Added World's 1st New Algorithm for Repair MTK Imei & Privacy Code - Page 4 - GSM-Forum

bis.kadhar · 03-30-2015, 11:37

sony xperia
st.21 i

bis.kadhar · 03-30-2015, 11:51

micromax A.110Q

test repot

read info

read flash

Root done

wipe data

ashu20 · 03-30-2015, 12:22

plz add spd cpu privecy lock removed

blacky199 · 03-30-2015, 14:03

Quote:

Originally Posted by mygsmman

CPU TYPE8810/6820 PLZ helppppppppppppp

make a new thread with full details'

Punto-Móvil · 03-30-2015, 15:44

Hi there volcano team
is your box able to flash zte android phones especially zte blade glux (mt6572).
I have one dead set and need badly to revive it?
Thanks in advance.
THIS IS BOOT INFO READ WITH NCK DONGLE TOOL :

Action : Boot Info.
Selected Zte:ZTE Blade L2
Exe version: NCKDongle AndroidMTK 2.5.4.9
DA: MTK_AllInOne_DA.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM127)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A4834473164040502A11328811F
EMMC UA SIZE: 0x0xe9000000
BOOT STYLE : EMMC BOOT
Partition table saved to: Android_MTK\partition_tables\
DOWNLOAD INFORMATION!!
Version: V1.0
Ram checksum: DRAM_PASS
Download status: DL_DONE
All done.

Punto-movil

PAKFAN · 03-30-2015, 16:15

where is write flash test report sirrr

andrew88 · 03-30-2015, 18:36

Full Anti thef unlock LANIX S130:

Volcano Updated: 2015-03-28
Connecting...
Connection successful,connected state!
Version: V3.8
SN:482-380-176
Port:COM14
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM14 COM130
Current Port:COM14
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6572
Hardware version:CA01
Software version:0000
SecCfgVal :0x00000000
BromVersion :0xFF
BLVersion :0x01
Boot downloading complete!
EMMC_ID:0x90014A483447316404050BA166288101
EMMC_PRODUCT_NAME: SAMSUNG :0x483447316404
EMMC_BOOT1_SIZE: 0x00400000
EMMC_BOOT2_SIZE: 0x00400000
EMMC_PRMB_SIZE: 0x00400000
EMMC_GP1_SIZE: 0x00000000
EMMC_GP2_SIZE: 0x00000000
EMMC_GP3_SIZE: 0x00000000
EMMC_GP4_SIZE: 0x00000000
EMMC_USER_SIZE: 0x0E9000000(3.64 G)

Analysis of system files...
PRELOADER: addr:0x000000 --length:0xC00000
MBR: addr:0xC00000 --length:0x080000
EBR1: addr:0xC80000 --length:0x080000
PRO_INFO: addr:0xD00000 --length:0x300000
NVRAM: addr:0x1000000 --length:0x500000
PROTECT_F: addr:0x1500000 --length:0xA00000
PROTECT_S: addr:0x1F00000 --length:0xA00000
SECCFG: addr:0x2900000 --length:0x020000
UBOOT: addr:0x2920000 --length:0x060000
BOOTIMG: addr:0x2980000 --length:0x600000
RECOVERY: addr:0x2F80000 --length:0x600000
SEC_RO: addr:0x3580000 --length:0x040000
MISC: addr:0x35C0000 --length:0x080000
LOGO: addr:0x3640000 --length:0x300000
EXPDB: addr:0x3940000 --length:0xA00000
ANDROID: addr:0x4340000 --length:0x32000000
CACHE: addr:0x36340000 --length:0xE200000
USRDATA: addr:0x44540000 --length:0x72000000
FAT: addr:0xB6540000 --length:0x321C0000
BMTPOOL: addr:0xFFFF00A8 --length:0x1500000

Format addr:0x44540000 --Format length:0x72000000
Read phone information success.

>>Successfully reset anti-theft lock

masterRt1994 · 03-30-2015, 18:50

Quote:

Originally Posted by Punto-Móvil

Hi there volcano team
is your box able to flash zte android phones especially zte blade glux (mt6572).
I have one dead set and need badly to revive it?
Thanks in advance.
THIS IS BOOT INFO READ WITH NCK DONGLE TOOL :

Action : Boot Info.
Selected Zte:ZTE Blade L2
Exe version: NCKDongle AndroidMTK 2.5.4.9
DA: MTK_AllInOne_DA.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM127)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A4834473164040502A11328811F
EMMC UA SIZE: 0x0xe9000000
BOOT STYLE : EMMC BOOT
Partition table saved to: Android_MTK\partition_tables\
DOWNLOAD INFORMATION!!
Version: V1.0
Ram checksum: DRAM_PASS
Download status: DL_DONE
All done.

Punto-movil

try with latest version in android tab write fac file and post result

Punto-Móvil · 03-30-2015, 19:11

Quote:

Originally Posted by masterRt1994

try with latest version in android tab write fac file and post result

Thanks brother
can you be more explicit plz
i don t have volcano box.
am planning to buy it if it can solve this problem.
Best Regards
Punto-Móvil

Bolatito86 · 03-30-2015, 19:31

Pls I have problem with my volcano box I'm unable to connect phone with jig whenever I connect phone with jig box will disconnect from system, I need to restart application before the box connect back pls help me

Bhagvatsharma · 03-31-2015, 05:09

How to write Imei Karbonn A1+ Super plz Help Me ....................IMEI is Invalid .......After Format .

-Mosin- · 03-31-2015, 07:38

Quote:

Originally Posted by Bhagvatsharma

How to write Imei Karbonn A1+ Super plz Help Me ....................IMEI is Invalid .......After Format .

allali · 03-31-2015, 13:19

This version has a problem with nokia mtk pls check this bug

renzz · 03-31-2015, 13:53

mt6592 privacy problem not remove

stock on read phone information success

Volcano Updated: 2015-03-28
Connecting...
Connection successful,connected state!
Version: V3.8
SN:539-241-614
Port:COM76
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM1 COM3 COM21 COM76
Current Port:COM76
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6592
Hardware version:CA00
Software version:0000
SecCfgVal :0x00000000
BromVersion :0xFF
BLVersion :0x01
Boot downloading complete!
EMMC_ID:0x150100513758534142015198C65691AF
EMMC_PRODUCT_NAME: SAMSUNG :0x513758534142
EMMC_BOOT1_SIZE: 0x00400000
EMMC_BOOT2_SIZE: 0x00400000
EMMC_PRMB_SIZE: 0x00080000
EMMC_GP1_SIZE: 0x00000000
EMMC_GP2_SIZE: 0x00000000
EMMC_GP3_SIZE: 0x00000000
EMMC_GP4_SIZE: 0x00000000
EMMC_USER_SIZE: 0x1D2000000(7.28 G)

Analysis of system files...
PRELOADER: addr:0x000000 --length:0x040000
MBR: addr:0x000000 --length:0x080000
EBR1: addr:0x080000 --length:0x080000
PRO_INFO: addr:0x100000 --length:0x300000
NVRAM: addr:0x400000 --length:0x500000
PROTECT_F: addr:0x900000 --length:0xA00000
PROTECT_S: addr:0x1300000 --length:0xA00000
SECCFG: addr:0x1D00000 --length:0x040000
UBOOT: addr:0x1D40000 --length:0x060000
BOOTIMG: addr:0x1DA0000 --length:0xA00000
RECOVERY: addr:0x27A0000 --length:0xA00000
SEC_RO: addr:0x31A0000 --length:0x600000
MISC: addr:0x37A0000 --length:0x080000
LOGO: addr:0x3820000 --length:0x800000
EXPDB: addr:0x4020000 --length:0xFE0000
ANDROID: addr:0x5000000 --length:0x38800000
CACHE: addr:0x3D800000 --length:0x8000000
USRDATA: addr:0x45800000 --length:0x8B300000
BMTPOOL: addr:0xFFFF00A8 --length:0x1500000

Format addr:0x45800000 --Format length:0x8B300000
Read phone information success.

mob-tech · 04-01-2015, 07:49

clone 8552 before in 2.9.8 the reading was not possible ,, upon checking it was nad flash inside but in 2.9.9 i success in formating flash but the sim mangement got disabled plese any advise

03-30-2015, 11:37	#46 (permalink)
bis.kadhar No Life Poster Join Date: Jul 2013 Location: tamilnadu.kumbakonam Posts: 1,002 Member: 1971123 Status: Offline Sonork: 100.1661727 Thanks Meter: 555	sony st21i sony xperia st.21 i

03-30-2015, 11:51	#47 (permalink)
bis.kadhar No Life Poster Join Date: Jul 2013 Location: tamilnadu.kumbakonam Posts: 1,002 Member: 1971123 Status: Offline Sonork: 100.1661727 Thanks Meter: 555	micromax a110q read flash micromax A.110Q test repot read info read flash Root done wipe data

03-30-2015, 12:22	#48 (permalink)
ashu20 Junior Member Join Date: Aug 2014 Location: Amethi u.p india Age: 31 Posts: 34 Member: 2241654 Status: Offline Thanks Meter: 6	plz add spd cpu privecy lock removed

03-30-2015, 15:44	#50 (permalink)
Punto-Móvil No Life Poster Join Date: Oct 2009 Location: GRAN ALACANT SPAIN Posts: 1,055 Member: 1147852 Status: Offline Thanks Meter: 587	Hi there volcano team is your box able to flash zte android phones especially zte blade glux (mt6572). I have one dead set and need badly to revive it? Thanks in advance. THIS IS BOOT INFO READ WITH NCK DONGLE TOOL : Action : Boot Info. Selected Zte:ZTE Blade L2 Exe version: NCKDongle AndroidMTK 2.5.4.9 DA: MTK_AllInOne_DA.bin Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : PreLoader USB VCOM Port (COM127) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6572_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- EMMC: (29Gb+4096Mb) HYNIX 0x483447316404 EMMC FW VERSION: 05:00:00:00:00:00:00:00 EMMC CID: 90014A4834473164040502A11328811F EMMC UA SIZE: 0x0xe9000000 BOOT STYLE : EMMC BOOT Partition table saved to: Android_MTK\partition_tables\ DOWNLOAD INFORMATION!! Version: V1.0 Ram checksum: DRAM_PASS Download status: DL_DONE All done. Punto-movil

03-30-2015, 16:15	#51 (permalink)
PAKFAN Freak Poster Join Date: Jan 2007 Location: mobile shop near nws Posts: 106 Member: 424731 Status: Offline Sonork: 100.1669530 Thanks Meter: 18	where is write flash test report sirrr

03-30-2015, 18:36	#52 (permalink)
andrew88 Freak Poster Join Date: Jun 2006 Posts: 380 Member: 299797 Status: Offline Thanks Meter: 92	Full Anti thef unlock LANIX S130: Volcano Updated: 2015-03-28 Connecting... Connection successful,connected state! Version: V3.8 SN:482-380-176 Port:COM14 After format or Flash you have to press & hold power button for at least 1.30 mins. Note for win7 users : Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'. After that the spd drivers will have the ability to be loaded. Available Ports:COM14 COM130 Current Port:COM14 Analysis of USB port,Please insert phone USB cable. Connecting... CPU TYPE:MT6572 Hardware version:CA01 Software version:0000 SecCfgVal :0x00000000 BromVersion :0xFF BLVersion :0x01 Boot downloading complete! EMMC_ID:0x90014A483447316404050BA166288101 EMMC_PRODUCT_NAME: SAMSUNG :0x483447316404 EMMC_BOOT1_SIZE: 0x00400000 EMMC_BOOT2_SIZE: 0x00400000 EMMC_PRMB_SIZE: 0x00400000 EMMC_GP1_SIZE: 0x00000000 EMMC_GP2_SIZE: 0x00000000 EMMC_GP3_SIZE: 0x00000000 EMMC_GP4_SIZE: 0x00000000 EMMC_USER_SIZE: 0x0E9000000(3.64 G) Analysis of system files... PRELOADER: addr:0x000000 --length:0xC00000 MBR: addr:0xC00000 --length:0x080000 EBR1: addr:0xC80000 --length:0x080000 PRO_INFO: addr:0xD00000 --length:0x300000 NVRAM: addr:0x1000000 --length:0x500000 PROTECT_F: addr:0x1500000 --length:0xA00000 PROTECT_S: addr:0x1F00000 --length:0xA00000 SECCFG: addr:0x2900000 --length:0x020000 UBOOT: addr:0x2920000 --length:0x060000 BOOTIMG: addr:0x2980000 --length:0x600000 RECOVERY: addr:0x2F80000 --length:0x600000 SEC_RO: addr:0x3580000 --length:0x040000 MISC: addr:0x35C0000 --length:0x080000 LOGO: addr:0x3640000 --length:0x300000 EXPDB: addr:0x3940000 --length:0xA00000 ANDROID: addr:0x4340000 --length:0x32000000 CACHE: addr:0x36340000 --length:0xE200000 USRDATA: addr:0x44540000 --length:0x72000000 FAT: addr:0xB6540000 --length:0x321C0000 BMTPOOL: addr:0xFFFF00A8 --length:0x1500000 Format addr:0x44540000 --Format length:0x72000000 Read phone information success. >>Successfully reset anti-theft lock

03-30-2015, 19:31	#55 (permalink)
Bolatito86 Crazy Poster Join Date: Sep 2012 Location: nigeria Posts: 59 Member: 1806657 Status: Offline Sonork: Bolatito86 Thanks Meter: 6	Pls I have problem with my volcano box I'm unable to connect phone with jig whenever I connect phone with jig box will disconnect from system, I need to restart application before the box connect back pls help me

03-31-2015, 05:09	#56 (permalink)
Bhagvatsharma Junior Member Join Date: Nov 2012 Location: Shergarh Mathura UP Posts: 27 Member: 1834796 Status: Offline Sonork: [email protected] Thanks Meter: 8	How to write Imei Karbonn A1+ Super plz Help Me ....................IMEI is Invalid .......After Format .

03-31-2015, 13:19	#58 (permalink)
allali Freak Poster Join Date: Aug 2007 Location: Earth Age: 42 Posts: 271 Member: 573588 Status: Offline Thanks Meter: 33	This version has a problem with nokia mtk pls check this bug

03-31-2015, 13:53	#59 (permalink)
renzz Freak Poster Join Date: Jun 2013 Posts: 198 Member: 1969443 Status: Offline Thanks Meter: 83	mt6592 privacy problem not remove stock on read phone information success Volcano Updated: 2015-03-28 Connecting... Connection successful,connected state! Version: V3.8 SN:539-241-614 Port:COM76 After format or Flash you have to press & hold power button for at least 1.30 mins. Note for win7 users : Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'. After that the spd drivers will have the ability to be loaded. Available Ports:COM1 COM3 COM21 COM76 Current Port:COM76 Analysis of USB port,Please insert phone USB cable. Connecting... CPU TYPE:MT6592 Hardware version:CA00 Software version:0000 SecCfgVal :0x00000000 BromVersion :0xFF BLVersion :0x01 Boot downloading complete! EMMC_ID:0x150100513758534142015198C65691AF EMMC_PRODUCT_NAME: SAMSUNG :0x513758534142 EMMC_BOOT1_SIZE: 0x00400000 EMMC_BOOT2_SIZE: 0x00400000 EMMC_PRMB_SIZE: 0x00080000 EMMC_GP1_SIZE: 0x00000000 EMMC_GP2_SIZE: 0x00000000 EMMC_GP3_SIZE: 0x00000000 EMMC_GP4_SIZE: 0x00000000 EMMC_USER_SIZE: 0x1D2000000(7.28 G) Analysis of system files... PRELOADER: addr:0x000000 --length:0x040000 MBR: addr:0x000000 --length:0x080000 EBR1: addr:0x080000 --length:0x080000 PRO_INFO: addr:0x100000 --length:0x300000 NVRAM: addr:0x400000 --length:0x500000 PROTECT_F: addr:0x900000 --length:0xA00000 PROTECT_S: addr:0x1300000 --length:0xA00000 SECCFG: addr:0x1D00000 --length:0x040000 UBOOT: addr:0x1D40000 --length:0x060000 BOOTIMG: addr:0x1DA0000 --length:0xA00000 RECOVERY: addr:0x27A0000 --length:0xA00000 SEC_RO: addr:0x31A0000 --length:0x600000 MISC: addr:0x37A0000 --length:0x080000 LOGO: addr:0x3820000 --length:0x800000 EXPDB: addr:0x4020000 --length:0xFE0000 ANDROID: addr:0x5000000 --length:0x38800000 CACHE: addr:0x3D800000 --length:0x8000000 USRDATA: addr:0x45800000 --length:0x8B300000 BMTPOOL: addr:0xFFFF00A8 --length:0x1500000 Format addr:0x45800000 --Format length:0x8B300000 Read phone information success.

04-01-2015, 07:49	#60 (permalink)
mob-tech Freak Poster Join Date: Oct 2007 Location: live in mobile's heart Posts: 221 Member: 600282 Status: Offline Sonork: 100.1614516 Thanks Meter: 67	clone 8552 before in 2.9.8 the reading was not possible ,, upon checking it was nad flash inside but in 2.9.9 i success in formating flash but the sim mangement got disabled plese any advise