VolcanoBox 3.0 Inferno MTK_V1.0Cb- Inferno Key - World's 1st New Cpu Added !! - Page 2 - GSM-Forum

profkefah · 08-11-2016, 18:16

i have problem
VolcanoBox 3.0 Inferno MTK_V1.0D works ok
but VolcanoBox 3.0 Inferno MTK_V1.0Cb
soft dog locked

alijaanfsd · 08-11-2016, 18:30

Sir how mouch Time SPD Update

Faisal_Computer · 08-11-2016, 19:51

Spd update can be release any time

zoneofash · 08-12-2016, 02:55

Quote:

Originally Posted by profkefah

i have problem
VolcanoBox 3.0 Inferno MTK_V1.0D works ok
but VolcanoBox 3.0 Inferno MTK_V1.0Cb
soft dog locked

VolcanoBox 3.0 Inferno MTK_V1.0D = Run With Volcano Box Only
VolcanoBox 3.0 Inferno MTK_V1.0Cb = Run With Inferno Key Only

jbadat · 08-12-2016, 06:30

19:55:11
19:55:11 Operation:
1. Power off the phone.
2. Please insert USB cable within 20 seconds.
19:55:11
19:55:16 Connecting...
19:55:17 CPU TYPE:MT6592
19:55:17 Hardware version:CA00
19:55:17 Software version:0000
19:55:17 SecCfgVal :0x00000000
19:55:17 BromVersion :0x05
19:55:17 BLVersion :0xFE
19:55:18 Boot downloading...
19:55:20 not find id.
19:55:20 Backup factory file failed! ErrorCode:1
19:58:52
19:58:52 Operation:
1. Power off the phone.
2. Please insert USB cable within 20 seconds.
19:58:52
19:58:56 Please wait while stopped.
19:58:56 Backup factory file failed! ErrorCode:1
19:58:56 The user stops the operation.
19:59:10 Reading phone info...

19:59:10
19:59:10 Operation:
1. Power off the phone.
2. Please insert USB cable within 20 seconds.
19:59:10
19:59:44 Please wait while stopped.
19:59:44 Connecting...
19:59:45 CPU TYPE:MT6592
19:59:45 Hardware version:CA00
19:59:45 Software version:0000
19:59:45 SecCfgVal :0x00000000
19:59:45 BromVersion :0x05
19:59:45 BLVersion :0xFE
19:59:46 Boot downloading...
19:59:48 not find id.
19:59:48 Cannot connect with the phone, the program has terminated.

19:59:48 Read phone info Failed.

19:59:48 The user stops the operation.

i face this problem in gionee g3 stuk on logo

Akhtar_King · 08-12-2016, 11:42

Thanks Sir Nice Update Please Release Spd Setup Thanks

GSM AR · 08-12-2016, 12:51

Quote:

Originally Posted by jbadat

19:55:11
19:55:11 Operation:
1. Power off the phone.
2. Please insert USB cable within 20 seconds.
19:55:11
19:55:16 Connecting...
19:55:17 CPU TYPE:MT6592
19:55:17 Hardware version:CA00
19:55:17 Software version:0000
19:55:17 SecCfgVal :0x00000000
19:55:17 BromVersion :0x05
19:55:17 BLVersion :0xFE
19:55:18 Boot downloading...
19:55:20 not find id.
19:55:20 Backup factory file failed! ErrorCode:1
19:58:52
19:58:52 Operation:
1. Power off the phone.
2. Please insert USB cable within 20 seconds.
19:58:52
19:58:56 Please wait while stopped.
19:58:56 Backup factory file failed! ErrorCode:1
19:58:56 The user stops the operation.
19:59:10 Reading phone info...

19:59:10
19:59:10 Operation:
1. Power off the phone.
2. Please insert USB cable within 20 seconds.
19:59:10
19:59:44 Please wait while stopped.
19:59:44 Connecting...
19:59:45 CPU TYPE:MT6592
19:59:45 Hardware version:CA00
19:59:45 Software version:0000
19:59:45 SecCfgVal :0x00000000
19:59:45 BromVersion :0x05
19:59:45 BLVersion :0xFE
19:59:46 Boot downloading...
19:59:48 not find id.
19:59:48 Cannot connect with the phone, the program has terminated.

19:59:48 Read phone info Failed.

19:59:48 The user stops the operation.

i face this problem in gionee g3 stuk on logo

you can check your cable or battery

GSM AR · 08-12-2016, 15:59

Wipe data/cache successfully bY vOLCANO Infernp
>>
>>Connecting...
>>CPU TYPE:MT6592
>>Hardware version:CA00
>>Software version:0000
>>SecCfgVal :0x00000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!
>>EMMC_ID:0x150100523832314D4200D02FE43A52D5
>>EMMC_PRODUCT_NAME: 0x523832314D42
>>EMMC_BOOT1_SIZE: 0x00400000
>>EMMC_BOOT2_SIZE: 0x00400000
>>EMMC_PRMB_SIZE: 0x00400000
>>EMMC_GP1_SIZE: 0x00000000
>>EMMC_GP2_SIZE: 0x00000000
>>EMMC_GP3_SIZE: 0x00000000
>>EMMC_GP4_SIZE: 0x00000000
>>EMMC_USER_SIZE: 0x3A3E00000(14.56 G)
>>
>>Find partition success.
>>Write data success.
>>Wipe data/cache successfully.

Bell666 · 08-13-2016, 18:30

Please ad in Read Factory File name eMMC or NAND.
Also when read phone info ad eMMC or NAND. I have a lot of backup flash files but don't know if it's eMMC or NAND.

Bell666 · 08-13-2016, 18:49

Prevent flashing wrong file to wrong chip type, also if flashID is unknown stop flashing. At the moment you can cancel or continue. I killed 2 phones with continue.

RanaBhai · 08-14-2016, 10:37

inferno working now properly after a long time wait and struggle ..

08-12-2016, 15:59	#23 (permalink)
GSM AR Registered User Join Date: Aug 2016 Location: Multan Pakistan Posts: 787 Member: 2608490 Status: Offline Thanks Meter: 921	@jbadat Hare is tested report MT6592 Wipe data/cache successfully bY vOLCANO Infernp >> >>Connecting... >>CPU TYPE:MT6592 >>Hardware version:CA00 >>Software version:0000 >>SecCfgVal :0x00000000 >>BromVersion :0xFF >>BLVersion :0x01 >>Boot downloading complete! >>EMMC_ID:0x150100523832314D4200D02FE43A52D5 >>EMMC_PRODUCT_NAME: 0x523832314D42 >>EMMC_BOOT1_SIZE: 0x00400000 >>EMMC_BOOT2_SIZE: 0x00400000 >>EMMC_PRMB_SIZE: 0x00400000 >>EMMC_GP1_SIZE: 0x00000000 >>EMMC_GP2_SIZE: 0x00000000 >>EMMC_GP3_SIZE: 0x00000000 >>EMMC_GP4_SIZE: 0x00000000 >>EMMC_USER_SIZE: 0x3A3E00000(14.56 G) >> >>Find partition success. >>Write data success. >>Wipe data/cache successfully.

08-11-2016, 18:16	#16 (permalink)
profkefah No Life Poster Join Date: Mar 2015 Location: Islam Age: 35 Posts: 7,401 Member: 2371500 Status: Offline Thanks Meter: 5,806	i have problem VolcanoBox 3.0 Inferno MTK_V1.0D works ok but VolcanoBox 3.0 Inferno MTK_V1.0Cb soft dog locked

08-11-2016, 18:30	#17 (permalink)
alijaanfsd No Life Poster Join Date: Sep 2011 Location: Faislabad Age: 34 Posts: 936 Member: 1657674 Status: Offline Thanks Meter: 855	Sir how mouch Time SPD Update

08-11-2016, 19:51	#18 (permalink)
Faisal_Computer No Life Poster Join Date: Jun 2005 Location: Kamalia, Pakistan. Age: 38 Posts: 16,852 Member: 151871 Status: Offline Thanks Meter: 71,421	Spd update can be release any time

08-12-2016, 06:30	#20 (permalink)
jbadat Freak Poster Join Date: Mar 2011 Posts: 195 Member: 1546501 Status: Offline Thanks Meter: 15	19:55:11 19:55:11 Operation: 1. Power off the phone. 2. Please insert USB cable within 20 seconds. 19:55:11 19:55:16 Connecting... 19:55:17 CPU TYPE:MT6592 19:55:17 Hardware version:CA00 19:55:17 Software version:0000 19:55:17 SecCfgVal :0x00000000 19:55:17 BromVersion :0x05 19:55:17 BLVersion :0xFE 19:55:18 Boot downloading... 19:55:20 not find id. 19:55:20 Backup factory file failed! ErrorCode:1 19:58:52 19:58:52 Operation: 1. Power off the phone. 2. Please insert USB cable within 20 seconds. 19:58:52 19:58:56 Please wait while stopped. 19:58:56 Backup factory file failed! ErrorCode:1 19:58:56 The user stops the operation. 19:59:10 Reading phone info... 19:59:10 19:59:10 Operation: 1. Power off the phone. 2. Please insert USB cable within 20 seconds. 19:59:10 19:59:44 Please wait while stopped. 19:59:44 Connecting... 19:59:45 CPU TYPE:MT6592 19:59:45 Hardware version:CA00 19:59:45 Software version:0000 19:59:45 SecCfgVal :0x00000000 19:59:45 BromVersion :0x05 19:59:45 BLVersion :0xFE 19:59:46 Boot downloading... 19:59:48 not find id. 19:59:48 Cannot connect with the phone, the program has terminated. 19:59:48 Read phone info Failed. 19:59:48 The user stops the operation. i face this problem in gionee g3 stuk on logo

08-12-2016, 11:42	#21 (permalink)
Akhtar_King Junior Member Join Date: Aug 2016 Posts: 8 Member: 2610788 Status: Offline Thanks Meter: 1	Thanks Sir Nice Update Please Release Spd Setup Thanks

08-13-2016, 18:30	#24 (permalink)
Bell666 No Life Poster Join Date: Feb 2012 Posts: 762 Member: 1718440 Status: Offline Thanks Meter: 620	Please ad in Read Factory File name eMMC or NAND. Also when read phone info ad eMMC or NAND. I have a lot of backup flash files but don't know if it's eMMC or NAND.

08-13-2016, 18:49	#25 (permalink)
Bell666 No Life Poster Join Date: Feb 2012 Posts: 762 Member: 1718440 Status: Offline Thanks Meter: 620	Prevent flashing wrong file to wrong chip type, also if flashID is unknown stop flashing. At the moment you can cancel or continue. I killed 2 phones with continue.

08-14-2016, 10:37	#26 (permalink)
RanaBhai Freak Poster Join Date: Jan 2014 Location: Lahore,Pak Age: 35 Posts: 364 Member: 2112799 Status: Offline Thanks Meter: 87	inferno working now properly after a long time wait and struggle ..