Winmax W800 pattern lock solution need !!! - GSM-Forum

amit_gsm · 12-22-2013, 13:59

uzzal10 · 12-22-2013, 14:05

http://forum.gsmhosting.com/vbb/f723...oblem-1734316/

no solution....

sweet4hamza · 12-22-2013, 18:40

try wipe via adb or in fast boot mode , is solution

amit_gsm · 12-23-2013, 06:42

don't enter fast boot .......

**aZimBahar** · 12-23-2013, 06:51

Quote:

Originally Posted by amit_gsm

don't enter fast boot .......

If phone dont have fastboot mode , So if debag enable Do wipe
If not enable wait for support Or If you have factory file do flash

Br
AzimBahar

raselcox · 12-23-2013, 15:08

Detection initiated...
Vcc: null
Gnd: 6
Analyzing D+ and D-...
D+ = 4, D- = 2
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM72), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC8810/6820 [88100040]
Flash ID: 009800BC90667600
Flash Type:[TOSHIBA] TYBC0A111236KC10
FLASH LEN:0x20000000
mtdparts=sprd-nand:256k(spl),1536k(2ndbl),256k(params),512k(vmja luna),9m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 230m(system),160m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic)
>>Analysis flash internal data fail.

Still not supported with 2.4.4 version. I dont have another ok set and factory file thats why I cant take risk to format it

shaikat016 · 01-06-2015, 15:19

any body tested this solution

laxmi kamlesh · 01-06-2015, 15:42

@shaikat016

yes bro...

if analysis internal data successfully.

BR

..::Gsmideazone::.. · 01-06-2015, 17:48

winmax w800 pattern reset file available
so why everyone think about it

AniAxn · 01-06-2015, 20:36

@shaikat016 ...

Just use Volcano latest version. ..!!
Get read info in sap tab using boot 6820/8810 ..
Get success flash Id & Do format or CFT Calibration
Using one key Root ..

Wbr,
AniAXN

pastor good · 01-06-2015, 23:38

Quote:

Originally Posted by laxmi kamlesh

@shaikat016

yes bro...

if analysis internal data successfully.

BR

But not in all cases, some internal data analysis that show successful end up failing or causing the phone to reboot.

Moiz Khan · 01-07-2015, 08:19

Quote:

Originally Posted by pastor good

But not in all cases, some internal data analysis that show successful end up failing or causing the phone to reboot.

in case of flash internal analysis data fail, you always had to have factory file at your collection..then do FORMAT on your own RISK.

bR.

sujon_tel · 01-07-2015, 08:56

Volcanobox 2.0.0 Successful format SPD Android 6820
100% tested by sujon_telecom

uzzal10 · 01-07-2015, 16:13

VolcanoTool_v2.5.5 winmex w800 unlock possible tested by me 100%

gsm_mithun · 01-08-2015, 05:36

this phone support since update 1.9.6 tested by me see screen shot

12-22-2013, 13:59	#1 (permalink)
amit_gsm Freak Poster Join Date: Dec 2007 Location: Bangladesh Posts: 442 Member: 665514 Status: Offline Sonork: 100.1618806 Thanks Meter: 325	Winmax W800 pattern lock solution need !!!

12-22-2013, 14:05	#2 (permalink)
uzzal10 Freak Poster Join Date: Jun 2010 Location: Mobile servicing field Age: 33 Posts: 394 Member: 1319163 Status: Offline Sonork: no need... Thanks Meter: 89	http://forum.gsmhosting.com/vbb/f723...oblem-1734316/ no solution....

12-22-2013, 18:40	#3 (permalink)
sweet4hamza No Life Poster Join Date: Nov 2010 Location: Atif mobile,goal, faisalabad Posts: 12,041 Member: 1434736 Status: Offline Sonork: 100.1607275 Thanks Meter: 5,377	try wipe via adb or in fast boot mode , is solution

12-23-2013, 06:42	#4 (permalink)
amit_gsm Freak Poster Join Date: Dec 2007 Location: Bangladesh Posts: 442 Member: 665514 Status: Offline Sonork: 100.1618806 Thanks Meter: 325	don't enter fast boot .......

12-23-2013, 15:08	#6 (permalink)
raselcox No Life Poster Join Date: May 2008 Location: Bangladesh Posts: 622 Member: 782943 Status: Offline Sonork: 100.1601067 Thanks Meter: 204	Detection initiated... Vcc: null Gnd: 6 Analyzing D+ and D-... D+ = 4, D- = 2 Analyzing USB device, please wait... Find USB device:SCI USB2Serial (COM72), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. CPU TYPE:SC8810/6820 [88100040] Flash ID: 009800BC90667600 Flash Type:[TOSHIBA] TYBC0A111236KC10 FLASH LEN:0x20000000 mtdparts=sprd-nand:256k(spl),1536k(2ndbl),256k(params),512k(vmja luna),9m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 230m(system),160m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic) >>Analysis flash internal data fail. Still not supported with 2.4.4 version. I dont have another ok set and factory file thats why I cant take risk to format it

01-06-2015, 15:19	#7 (permalink)
shaikat016 Freak Poster Join Date: Mar 2014 Location: dhaka.khilgaon Posts: 103 Member: 2138714 Status: Offline Sonork: no Thanks Meter: 41	any body tested this solution

01-06-2015, 15:42	#8 (permalink)
laxmi kamlesh No Life Poster Join Date: Jan 2013 Location: India Posts: 2,283 Member: 1873645 Status: Offline Thanks Meter: 977	@shaikat016 yes bro... if analysis internal data successfully. BR

01-06-2015, 17:48	#9 (permalink)
..::Gsmideazone::.. No Life Poster Join Date: Dec 2008 Location: Apple pocket Age: 32 Posts: 4,787 Member: 936020 Status: Offline Sonork: 100.1611462 Thanks Meter: 2,771	winmax w800 pattern reset file available so why everyone think about it

01-06-2015, 20:36	#10 (permalink)
AniAxn Product Supporter Join Date: Jun 2009 Location: eMMC & UFS Posts: 4,600 Member: 1045758 Status: Offline Sonork: 100.1613661(Offline) Thanks Meter: 4,307	@shaikat016 ... Just use Volcano latest version. ..!! Get read info in sap tab using boot 6820/8810 .. Get success flash Id & Do format or CFT Calibration Using one key Root .. Wbr, AniAXN

01-07-2015, 08:56	#13 (permalink)
sujon_tel Freak Poster Join Date: Aug 2008 Location: Satkhira, Bangladesh Posts: 123 Member: 833482 Status: Offline Thanks Meter: 30	Volcanobox 2.0.0 Successful format SPD Android 6820 100% tested by sujon_telecom

01-07-2015, 16:13	#14 (permalink)
uzzal10 Freak Poster Join Date: Jun 2010 Location: Mobile servicing field Age: 33 Posts: 394 Member: 1319163 Status: Offline Sonork: no need... Thanks Meter: 89	VolcanoTool_v2.5.5 winmex w800 unlock possible tested by me 100%

01-08-2015, 05:36	#15 (permalink)
gsm_mithun Banned Join Date: Jul 2011 Age: 32 Posts: 1,923 Member: 1609044 Status: Offline Thanks Meter: 892	this phone support since update 1.9.6 tested by me see screen shot