GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > Volcano Box

 
 
LinkBack Thread Tools Display Modes
Old 09-06-2012, 17:10   #1 (permalink)
Freak Poster
 
Join Date: Apr 2008
Posts: 144
Member: 742181
Status: Offline
Sonork: correction to an action
Thanks Meter: 2
pls this phone use to blink i then flash with the file


pls this phone use to blink i then flash with the file from forum and it went dead i even restore the backup still no luck kindly give solution thanks log. 2012-09-04 3:33:11 PM >>Detection initiated, connect the phone and power on it... 2012-09-04 3:33:20 PM >>Vcc: null 2012-09-04 3:33:20 PM >>Gnd: null 2012-09-04 3:33:20 PM >>Analyzing Rx and Tx... 2012-09-04 3:33:43 PM >>User stop 2012-09-04 3:33:43 PM >>Pinouts are not fonud! 2012-09-04 3:34:42 PM >>Detection initiated, connect the phone and power on it... 2012-09-04 3:34:51 PM >>Vcc: null 2012-09-04 3:34:51 PM >>Gnd: null 2012-09-04 3:34:51 PM >>Analyzing Rx and Tx... 2012-09-04 3:35:45 PM >>User stop 2012-09-04 3:35:45 PM >>Pinouts are not fonud! 2012-09-04 3:38:01 PM >>Setting pinouts... 2012-09-04 3:38:03 PM >>Pinout setting complete. 2012-09-04 3:38:03 PM >>Setting pinouts... 2012-09-04 3:38:05 PM >>Pinout setting complete. 2012-09-04 3:38:47 PM >>Available Ports:COM11 2012-09-04 3:38:47 PM >>Detection initiated, connect the phone and power on it... 2012-09-04 3:38:53 PM >>Vcc: null 2012-09-04 3:38:53 PM >>Gnd: 1 4 12 2012-09-04 3:38:53 PM >>RX: 6, TX: 7 0990492012 3:39:01 PM >> 0990492012 3:39:01 PM >> 0990492012 3:39:01 PM >> 2012-09-04 3:39:11 PM >>IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile 0990492012 3:39:11 PM >>IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile 2012-09-04 3:39:18 PM >>Detection initiated, connect the phone and power on it... 2012-09-04 3:39:27 PM >>Vcc: null 2012-09-04 3:39:27 PM >>Gnd: 1 4 2012-09-04 3:39:27 PM >>Analyzing Rx and Tx... 2012-09-04 3:39:39 PM >>User stop 2012-09-04 3:39:39 PM >>Pinouts are not fonud! 2012-09-04 3:39:43 PM >>Detection initiated, connect the phone and power on it... 2012-09-04 3:39:45 PM >>Vcc: null 2012-09-04 3:39:45 PM >>Gnd: 1 4 2012-09-04 3:39:45 PM >>RX: 6, TX: 7 0990492012 3:39:51 PM >> 0990492012 3:39:51 PM >> 0990492012 3:39:51 PM >> 2012-09-04 3:39:51 PM >>Connecting... 0990492012 3:39:51 PM >>Connecting... 2012-09-04 3:39:51 PM >>Hardware version:8A04 0990492012 3:39:51 PM >>Hardware version:8A04 2012-09-04 3:39:51 PM >>Software version:8A00 0990492012 3:39:51 PM >>Software version:8A00 2012-09-04 3:39:51 PM >>CPU TYPE:6253 0990492012 3:39:51 PM >>CPU TYPE:6253 2012-09-04 3:39:51 PM >>Internal version:0000 0990492012 3:39:51 PM >>Internal version:0000 2012-09-04 3:39:52 PM >>Boot downloading... 0990492012 3:39:52 PM >>Boot downloading... 2012-09-04 3:40:34 PM >>Mobile phone software version for: 0990492012 3:40:34 PM >>Mobile phone software version for: 2012-09-04 3:40:34 PM >>Baud adjust... 0990492012 3:40:34 PM >>Baud adjust... 2012-09-04 3:40:50 PM >>Format range: Start Address: 0x000000,Format Length :0x000000 0990492012 3:40:50 PM >>Format range: Start Address: 0x000000,Format Length :0x000000 2012-09-04 3:40:50 PM >>Flash erasing... 0990492012 3:40:50 PM >>Flash erasing... 2012-09-06 8:50:16 AM >>Volcano Updated: 2012-09-01 2012-09-06 8:50:16 AM >>Connecting... 2012-09-06 8:50:18 AM >>Connection successful,connected state! 2012-09-06 8:50:18 AM >>Version: V3.8 2012-09-06 8:50:18 AM >>SN:157-597-669 2012-09-06 8:50:18 AM >>Port:COM89 2012-09-06 8:53:42 AM >>Setting pinouts... 2012-09-06 8:53:45 AM >>Pinout setting complete. 2012-09-06 8:53:47 AM >>Setting pinouts... 2012-09-06 8:53:50 AM >>Pinout setting complete. 2012-09-06 8:53:59 AM >>Available Ports:COM89 2012-09-06 8:53:59 AM >>Current Port:COM89 2012-09-06 8:53:59 AM >>Detection initiated... 2012-09-06 8:54:01 AM >>Vcc: null 2012-09-06 8:54:01 AM >>Gnd: null 2012-09-06 8:54:01 AM >>Analyzing D+ and D-... 2012-09-06 8:54:06 AM >>D+ = 3, D- = 2 2012-09-06 8:54:06 AM >>Analyzing USB device, please wait... 2012-09-06 8:54:58 AM >>User stop 2012-09-06 8:54:58 AM >>Pinouts are not fonud! 2012-09-06 8:55:08 AM >>Available Ports:COM89 2012-09-06 8:55:08 AM >>Detection initiated... 2012-09-06 8:55:10 AM >>Vcc: null 2012-09-06 8:55:10 AM >>Gnd: null 2012-09-06 8:55:10 AM >>Analyzing D+ and D-... 2012-09-06 8:56:23 AM >>Detection initiated... 2012-09-06 8:56:25 AM >>Vcc: null 2012-09-06 8:56:25 AM >>Gnd: null 2012-09-06 8:56:25 AM >>Analyzing D+ and D-... 2012-09-06 8:57:04 AM >>Setting pinouts... 2012-09-06 8:57:05 AM >>Pinout setting complete. 2012-09-06 8:57:09 AM >>Setting pinouts... 2012-09-06 8:57:10 AM >>Pinout setting complete. 2012-09-06 8:57:16 AM >>Detection initiated... 2012-09-06 8:57:17 AM >>Vcc: null 2012-09-06 8:57:17 AM >>Gnd: 5 2012-09-06 8:57:17 AM >>Analyzing D+ and D-... 2012-09-06 8:57:21 AM >>D+ = 3, D- = 2 2012-09-06 8:57:21 AM >>Analyzing USB device, please wait... 2012-09-06 8:57:24 AM >>Find USB device:SCI USB2Serial (COM92), (VID_1782&PID_4D00) 2012-09-06 8:57:24 AM >> 2012-09-06 8:57:24 AM >> 2012-09-06 8:57:25 AM >>Internal version: SPRD3 2012-09-06 8:57:25 AM >>Boot downloading... 2012-09-06 8:57:26 AM >>Start boot please wait a moment.... 2012-09-06 8:57:31 AM >>Please change Boot or reduce Baudrate, try it again. 2012-09-06 8:57:32 AM >>Ready to read/write again, please remove the clip or battery and then re-loaded it. 2012-09-06 12:44:30 PM >>Volcano Updated: 2012-09-01 2012-09-06 12:44:31 PM >>Connecting... 2012-09-06 12:44:32 PM >>Connection successful,connected state! 2012-09-06 12:44:32 PM >>Version: V3.8 2012-09-06 12:44:32 PM >>SN:157-597-669 2012-09-06 12:44:32 PM >>Port:COM89 2012-09-06 12:45:22 PM >>Setting pinouts... 2012-09-06 12:45:24 PM >>Pinout setting complete. 2012-09-06 12:45:25 PM >>Setting pinouts... 2012-09-06 12:45:27 PM >>Pinout setting complete. 2012-09-06 12:45:36 PM >>Available Ports:COM89 2012-09-06 12:45:36 PM >>Current Port:COM89 2012-09-06 12:45:36 PM >>Detection initiated... 2012-09-06 12:45:37 PM >>Vcc: null 2012-09-06 12:45:37 PM >>Gnd: 5 2012-09-06 12:45:37 PM >>Analyzing D+ and D-... 2012-09-06 12:45:39 PM >>D+ = 3, D- = 2 2012-09-06 12:45:39 PM >>Detection D+/D- with 0.97 seconds! 2012-09-06 12:45:39 PM >>Analyzing USB device, please wait... 2012-09-06 12:45:44 PM >>Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300) 2012-09-06 12:45:44 PM >>Setting... 2012-09-06 12:45:49 PM >>Find USB device:GCREADER USB Device, (VID_1B20&PID_0300) 2012-09-06 12:45:49 PM >>Pinouts setting complete! 2012-09-06 12:45:49 PM >>Connecting to phone... 0990692012 12:45:49 PM >>Connecting to phone... 2012-09-06 12:45:49 PM >>Connection success! 0990692012 12:45:49 PM >>Connection success! 2012-09-06 12:45:49 PM >>Boot downloading... 0990692012 12:45:49 PM >>Boot downloading... 2012-09-06 12:45:49 PM >>CPU ID:00508003 0990692012 12:45:49 PM >>CPU ID:00508003 2012-09-06 12:45:52 PM >>Flash Type: WINBOND_W25Q128BV 0990692012 12:45:52 PM >>Flash Type: WINBOND_W25Q128BV 2012-09-06 12:45:52 PM >>Flash ID: 00EF401800000000 0990692012 12:45:52 PM >>Flash ID: 00EF401800000000 2012-09-06 12:45:52 PM >>Flash Size: 01000000h 0990692012 12:45:52 PM >>Flash Size: 01000000h 2012-09-06 12:45:52 PM >>Read Size: 01000000h(16M) 0990692012 12:45:52 PM >>Read Size: 01000000h(16M) 2012-09-06 12:45:52 PM >>CPU : 8533d/8532_series 0990692012 12:45:52 PM >>CPU : 8533d/8532_series 2012-09-06 12:45:52 PM >>Flash Reading... 0990692012 12:45:52 PM >>Flash Reading... 2012-09-06 12:46:39 PM >>Phone Lock or SIM Lock: 2012-09-06 12:46:39 PM >>0000 2012-09-06 12:46:39 PM >>5050 2012-09-06 12:46:39 PM >>7319 2012-09-06 12:46:39 PM >>8076 2012-09-06 12:46:39 PM >>Anti-theft lock: 2012-09-06 12:46:40 PM >>100000 2012-09-06 12:46:40 PM >>460000 2012-09-06 12:46:40 PM >>460001 2012-09-06 12:46:40 PM >>466011 2012-09-06 12:46:40 PM >>3002 2012-09-06 12:46:40 PM >>0813 2012-09-06 12:46:40 PM >>0809 2012-09-06 12:46:40 PM >>0803 2012-09-06 12:46:40 PM >>0810 2012-09-06 12:46:40 PM >>screen lock: 2012-09-06 12:46:40 PM >>023014567 2012-09-06 12:46:40 PM >>014523678 2012-09-06 12:46:40 PM >>4321 2012-09-06 12:47:16 PM >>The data has been saved in C:\Program Files\Volcano Team\VolcanoBox\Drivers\Phone Drivers\SPD New Drivers 1.5.6.1\x64\driver\damaturu 1.bin, size: 16 M. 2012-09-06 12:48:40 PM >>Detection initiated... 2012-09-06 12:48:41 PM >>Vcc: null 2012-09-06 12:48:41 PM >>Gnd: 5 2012-09-06 12:48:41 PM >>Analyzing D+ and D-... 2012-09-06 12:48:43 PM >>D+ = 3, D- = 2 2012-09-06 12:48:43 PM >>Detection D+/D- with 0.95 seconds! 2012-09-06 12:48:43 PM >>Analyzing USB device, please wait... 2012-09-06 12:48:47 PM >>Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300) 2012-09-06 12:48:48 PM >>Setting... 2012-09-06 12:48:52 PM >>Find USB device:GCREADER USB Device, (VID_1B20&PID_0300) 2012-09-06 12:48:52 PM >>Pinouts setting complete! 2012-09-06 12:48:53 PM >>Connecting to phone... 0990692012 12:48:53 PM >>Connecting to phone... 2012-09-06 12:48:53 PM >>Connection success! 0990692012 12:48:53 PM >>Connection success! 2012-09-06 12:48:53 PM >>Boot downloading... 0990692012 12:48:53 PM >>Boot downloading... 2012-09-06 12:48:53 PM >>CPU ID:00508003 0990692012 12:48:53 PM >>CPU ID:00508003 2012-09-06 12:48:56 PM >>Flash Type: WINBOND_W25Q128BV 0990692012 12:48:56 PM >>Flash Type: WINBOND_W25Q128BV 2012-09-06 12:48:56 PM >>Flash ID: 00EF401800000000 0990692012 12:48:56 PM >>Flash ID: 00EF401800000000 2012-09-06 12:48:56 PM >>Flash Size: 01000000h 0990692012 12:48:56 PM >>Flash Size: 01000000h 2012-09-06 12:48:56 PM >>CPU : 8533d/8532_series 0990692012 12:48:56 PM >>CPU : 8533d/8532_series 2012-09-06 12:48:56 PM >>Flash Erasing... 0990692012 12:48:56 PM >>Flash Erasing... 2012-09-06 12:49:38 PM >>Flash Writing... 0990692012 12:49:38 PM >>Flash Writing... 2012-09-06 12:56:53 PM >>Volcano Updated: 2012-09-01 2012-09-06 12:56:53 PM >>Connecting... 2012-09-06 12:56:55 PM >>Connection successful,connected state! 2012-09-06 12:56:55 PM >>Version: V3.8 2012-09-06 12:56:55 PM >>SN:157-597-669 2012-09-06 12:56:55 PM >>Port:COM89 2012-09-06 12:57:22 PM >>Setting pinouts... 2012-09-06 12:57:24 PM >>Pinout setting complete. 2012-09-06 12:57:27 PM >>Setting pinouts... 2012-09-06 12:57:28 PM >>Pinout setting complete. 2012-09-06 1:16:13 PM >>Available Ports:COM89 2012-09-06 1:16:13 PM >>Current Port:COM89 2012-09-06 1:16:13 PM >>Detection initiated... 2012-09-06 1:16:13 PM >>Vcc: null 2012-09-06 1:16:13 PM >>Gnd: 5 2012-09-06 1:16:13 PM >>Analyzing D+ and D-... 2012-09-06 1:16:16 PM >>D+ = 3, D- = 2 2012-09-06 1:16:16 PM >>Detection D+/D- with 0.97 seconds! 2012-09-06 1:16:16 PM >>Analyzing USB device, please wait... 2012-09-06 1:16:20 PM >>Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300) 2012-09-06 1:16:20 PM >>Setting... 2012-09-06 1:16:25 PM >>Find USB device:GCREADER USB Device, (VID_1B20&PID_0300) 2012-09-06 1:16:25 PM >>Pinouts setting complete! 2012-09-06 1:16:26 PM >>Connecting to phone... 0990692012 1:16:26 PM >>Connecting to phone... 2012-09-06 1:16:26 PM >>Connection success! 0990692012 1:16:26 PM >>Connection success! 2012-09-06 1:16:26 PM >>Boot downloading... 0990692012 1:16:26 PM >>Boot downloading... 2012-09-06 1:16:26 PM >>CPU ID:00508003 0990692012 1:16:26 PM >>CPU ID:00508003 2012-09-06 1:16:29 PM >>Flash Type: WINBOND_W25Q128BV 0990692012 1:16:29 PM >>Flash Type: WINBOND_W25Q128BV 2012-09-06 1:16:29 PM >>Flash ID: 00EF401800000000 0990692012 1:16:29 PM >>Flash ID: 00EF401800000000 2012-09-06 1:16:29 PM >>Flash Size: 01000000h 0990692012 1:16:29 PM >>Flash Size: 01000000h 2012-09-06 1:16:29 PM >>CPU : 8533d/8532_series 0990692012 1:16:29 PM >>CPU : 8533d/8532_series 2012-09-06 1:16:29 PM >>Flash Erasing... 0990692012 1:16:29 PM >>Flash Erasing... 2012-09-06 1:17:11 PM >>Flash Writing... 0990692012 1:17:11 PM >>Flash Writing... 2012-09-06 1:42:06 PM >>Volcano Updated: 2012-09-01 2012-09-06 1:42:06 PM >>Connecting... 2012-09-06 1:42:08 PM >>Connection successful,connected state! 2012-09-06 1:42:08 PM >>Version: V3.8 2012-09-06 1:42:08 PM >>SN:157-597-669 2012-09-06 1:42:08 PM >>Port:COM89 2012-09-06 1:42:50 PM >>Volcano Updated: 2012-09-01 2012-09-06 1:42:50 PM >>Connecting... 2012-09-06 1:42:52 PM >>Connection successful,connected state! 2012-09-06 1:42:52 PM >>Version: V3.8 2012-09-06 1:42:52 PM >>SN:157-597-669 2012-09-06 1:42:52 PM >>Port:COM89 2012-09-06 1:47:33 PM >>Available Ports:COM89 2012-09-06 1:47:33 PM >>Current Port:COM89 2012-09-06 1:47:33 PM >>Detection initiated... 2012-09-06 1:47:34 PM >>Vcc: null 2012-09-06 1:47:34 PM >>Gnd: 5 2012-09-06 1:47:34 PM >>Analyzing D+ and D-... 2012-09-06 1:47:36 PM >>D+ = 3, D- = 2 2012-09-06 1:47:36 PM >>Detection D+/D- with 0.97 seconds! 2012-09-06 1:47:36 PM >>Analyzing USB device, please wait... 2012-09-06 1:47:41 PM >>Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300) 2012-09-06 1:47:41 PM >>Setting... 2012-09-06 1:47:45 PM >>Find USB device:GCREADER USB Device, (VID_1B20&PID_0300) 2012-09-06 1:47:45 PM >>Pinouts setting complete! 2012-09-06 1:47:46 PM >>Connecting to phone... 0990692012 1:47:46 PM >>Connecting to phone... 2012-09-06 1:47:46 PM >>Connection success! 0990692012 1:47:46 PM >>Connection success! 2012-09-06 1:47:46 PM >>Boot downloading... 0990692012 1:47:46 PM >>Boot downloading... 2012-09-06 1:47:46 PM >>CPU ID:00508003 0990692012 1:47:46 PM >>CPU ID:00508003 2012-09-06 1:47:46 PM >>Boot downloading overtime(3),please re-select other boot file, or USB reset. 0990692012 1:47:46 PM >>Boot downloading overtime(3),please re-select other boot file, or USB reset. 2012-09-06 1:49:06 PM >>Boot downloading error(2),please re-select other boot file, or USB reset. 0990692012 1:49:06 PM >>Boot downloading error(2),please re-select other boot file, or USB reset. 2012-09-06 1:49:06 PM >>If the phone ready to read and write again, please re-plug the USB or reset the pinouts. 0990692012 1:49:06 PM >>If the phone ready to read and write again, please re-plug the USB or reset the pinouts
 
Old 09-06-2012, 17:17   #2 (permalink)
No Life Poster
 
samo_d1's Avatar
 
Join Date: Jan 2011
Location: HARDOI (U.P.) INDIA
Age: 36
Posts: 506
Member: 1483881
Status: Offline
Sonork: 100.1612698
Thanks Meter: 93
brother post screen shots
 
Old 09-06-2012, 17:37   #3 (permalink)
No Life Poster
 
Join Date: Jan 2006
Location: Pakistan
Posts: 15,094
Member: 226457
Status: Offline
Sonork: No more used
Thanks Meter: 14,934
Plz post screen shot

Br
Qaisar mahmood
 
Old 06-04-2013, 13:45   #4 (permalink)
Insane Poster
 
Join Date: Apr 2013
Location: tamilnadu,madurai
Posts: 80
Member: 1916112
Status: Offline
Thanks Meter: 8
D+ = 3, D- = 2
Detection D+/D- with 1.00 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Set the Pinouts failed,please reconnect and try again!
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 1.11 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Set the Pinouts failed,please reconnect and try again!
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 1.36 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Set the Pinouts failed,please reconnect and try again!
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: null
Gnd: null
Detection initiated...
User stop
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: null
Gnd: null
Detection initiated...
Failed to detect.
Clearing pinouts settings...
Clearing pinouts settings complete!
Adding the cable's title...
Cable title added successfully.
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
Reset USB device and search it...
Time-out, try again, or re-plug your phone, or re-defined pinouts.
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 1.00 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Set the Pinouts failed,please reconnect and try again!
Reset USB device and search it...
Time-out, try again, or re-plug your phone, or re-defined pinouts.
Reset USB d
 
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 04:43.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.21031 seconds with 8 queries

SEO by vBSEO