Xpod 6" phablet dead revive - GSM-Forum

basharaljoud · 02-11-2016, 14:40

now its been 2 days since the phone died i tried every possible solution on the internet but the phone refuse to take the preloader the main problem is the phone flashed with worng rom including the preloader i managed to make the device to be seen by the merapi tool but it wont take the .bin it just stops at boot downloading is there a way to force the preloader into the device i already tried using the sp flash tool but it gave me an error 4032 then an error 4001 with all versions 3 & 5 tried 2 different pc same result i previously managed to revive a phone using sp flash tool but on a different MTK phone
device name : Xpod 6" phablet quad core black
cpu : MT6582
board ID : Elink_mr601_sub_v2 2014-04-15

PS: the pc can read the device using kcolo gnd bridge as mtk usb vcom i have 2 working phones of the same model and i have the backup of both of them and the read flash .bin for both also
plz help volcano should be able to force this mofo preloader

basharaljoud · 02-11-2016, 15:51

nazeerkhan0369 · 03-08-2016, 14:40

bro where is kolo point can u upload pic

thanks in advance

assrar1 · 05-07-2016, 09:47

sir if you please upload the uboot lk.bin and boot.img and recovery.img only and thank you very much
you can force dead preloader for this device using this scatter file and this preloader
http://d-h.st/TVYZ
thank you in advance bro

02-11-2016, 14:40	#1 (permalink)
basharaljoud Junior Member Join Date: Jul 2015 Posts: 29 Member: 2424616 Status: Offline Thanks Meter: 0	Xpod 6" phablet dead revive now its been 2 days since the phone died i tried every possible solution on the internet but the phone refuse to take the preloader the main problem is the phone flashed with worng rom including the preloader i managed to make the device to be seen by the merapi tool but it wont take the .bin it just stops at boot downloading is there a way to force the preloader into the device i already tried using the sp flash tool but it gave me an error 4032 then an error 4001 with all versions 3 & 5 tried 2 different pc same result i previously managed to revive a phone using sp flash tool but on a different MTK phone device name : Xpod 6" phablet quad core black cpu : MT6582 board ID : Elink_mr601_sub_v2 2014-04-15 PS: the pc can read the device using kcolo gnd bridge as mtk usb vcom i have 2 working phones of the same model and i have the backup of both of them and the read flash .bin for both also plz help volcano should be able to force this mofo preloader

03-08-2016, 14:40	#3 (permalink)
nazeerkhan0369 Freak Poster Join Date: Jun 2015 Location: karachi Posts: 147 Member: 2404243 Status: Offline Sonork: 100.192.168.1 Thanks Meter: 39	xpod phablet dead after flash bro where is kolo point can u upload pic thanks in advance

05-07-2016, 09:47	#4 (permalink)
assrar1 Junior Member Join Date: Dec 2010 Location: usa Posts: 30 Member: 1476801 Status: Offline Sonork: 222440 Thanks Meter: 19	sir if you please upload the uboot lk.bin and boot.img and recovery.img only and thank you very much you can force dead preloader for this device using this scatter file and this preloader http://d-h.st/TVYZ thank you in advance bro Last edited by assrar1; 05-07-2016 at 09:55.

02-11-2016, 15:51	#2 (permalink)
basharaljoud Junior Member Join Date: Jul 2015 Posts: 29 Member: 2424616 Status: Offline Thanks Meter: 0