Lt15 dead after unlock [Solved] - GSM-Forum

HtcGalicia · 07-04-2012, 16:27

plaese help me to solve this problem... after unlock the phone not power on

br

**4se Sales** · 07-04-2012, 18:58

Give us the complete log and what exactly did u do

HtcGalicia · 07-05-2012, 09:33

here is log... any idea?

Quote:

4SE - tool 1.8.4 (S/N:132F0094A388)
Selected model: Xperia™ arc (LT15)
Selected operation: Desbloqueo
Selected interface: USB (BOOTROM)
Checking USB driver status...
Remove battery. Link the TestPoint to GND and then plug USB cable
Conexión establecida al puerto USB2
You can now release the keys and allow the process to run. Do not disconnect the phone
Identificando terminal...
Connecting DLOAD...
Enviando Preloader...
Conexión establecida al puerto USB2
Enviando LoaderTEST...
Chip:QC8255 Model:LT15i IMEI:35814804-535786-5 AID:0001 Color:BROWN
DEVICE_ID: 86E5C068FC30231ECFFA2DCCD2E2A830C4548A59
Enviando logic QC8255:
Detectando tipo de flash...
ID: 2CB3 (Micron)
Chip: Micron 8192 Mbit NAND (large page) x16
Logical address: 0x00000000
Size: 1056 Mb
Logical block size: 0x20000
Logical blocks count: 0x2000
OTP: LOCKED
Reading TA security data...
Opening TA...
Reading SIMLock data...
Original HwConf certificate detected
Prcessing SIMLock signature...
Opening TA...
Writing SIMLock data...
Writing S1boot image...
Apagando terminal...
Operation completed successfully. You can disconnect the phone now
Proceso finalizado. Tiempo total [24 seg]

**4se Sales** · 07-05-2012, 11:28

1. You are using a very old version - use 1.8.6 the latest version to unlock (http://www.4se.com/tool4SE_186.exe)
2. Charge the battery before u do any operations.

HtcGalicia · 07-06-2012, 09:53

ok, running perfectly..

many thanks

**4se Sales** · 07-07-2012, 09:27

Good,
Problem solved and thread closed.

07-04-2012, 16:27	#1 (permalink)
HtcGalicia Crazy Poster Join Date: Dec 2011 Location: Galicia, Spain Posts: 57 Member: 1700971 Status: Offline Thanks: 6 Thanked 6 Times in 5 Posts	Lt15 dead after unlock [Solved] plaese help me to solve this problem... after unlock the phone not power on br

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	23	09-16-2012 23:57
FAQ about unlock n0kia	man0n	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	11-29-2010 18:06
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	4	07-09-1999 22:08

07-04-2012, 18:58	#2 (permalink)
4se Sales Product Manager Join Date: Mar 2012 Posts: 334 Member: 1739882 Status: Offline Sonork: 100.1614616 Thanks: 154 Thanked 1,234 Times in 88 Posts	Give us the complete log and what exactly did u do

07-05-2012, 11:28	#4 (permalink)
4se Sales Product Manager Join Date: Mar 2012 Posts: 334 Member: 1739882 Status: Offline Sonork: 100.1614616 Thanks: 154 Thanked 1,234 Times in 88 Posts	1. You are using a very old version - use 1.8.6 the latest version to unlock (http://www.4se.com/tool4SE_186.exe) 2. Charge the battery before u do any operations.

07-06-2012, 09:53	#5 (permalink)
HtcGalicia Crazy Poster Join Date: Dec 2011 Location: Galicia, Spain Posts: 57 Member: 1700971 Status: Offline Thanks: 6 Thanked 6 Times in 5 Posts	ok, running perfectly.. many thanks

07-07-2012, 09:27	#6 (permalink)
4se Sales Product Manager Join Date: Mar 2012 Posts: 334 Member: 1739882 Status: Offline Sonork: 100.1614616 Thanks: 154 Thanked 1,234 Times in 88 Posts	Good, Problem solved and thread closed.