Lt18 experia mini

[pcs1234]

i have to unlock a experia mini in the next few hours ,could someone please go throught the procedure for unlock,because i know its a test point unlock ,ive not had any sucsess with any test point unlocks yet ........Thanks ...

[..::Angel::..]

How to unlock QC phones by Test Point:

1. USB Drivers should be installed first from here:
C:\Documents and Settings\Administrator\Application Data\4SE\Drivers\USBFlash\ggsemc.inf
2. Select appropriate model from "operations"
3. Go to Unlock tab
4. See TP on right side, connect TP to GND
5. Press "START" button
6. Windows will ask for USB driver, give this path:
C:\Documents and Settings\Administrator\Application Data\4SE\Drivers\USBFlash\zeus.inf
7. 4SE SW will tell to "Release/Disconnect TP" do it
8. Let SW do the rest and its unlocked.

Here are logs from my R800 unlock:

4SE - tool 1.8.2
Selected model: Xperia™ PLAY (R800)
Selected operation: Unlock
Selected interface: USB (BOOTROM)
Checking USB driver status...OK (SEMC Flash Device v2.2.0.5 | 5-4-2010)
Remove battery. Link the TestPoint to GND and then plug USB cable
Connected to USB1
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...
Connecting DLOAD...OK (PBL_DownloaderVER1.0)
        Sending Preloader...OK
Connected to USB1
        Sending LoaderTEST...OK
        Chip:QC8255 Model:R800i IMEI:35730204-199658-7 AID:0001 Color:BROWN
        DEVICE_ID: 5A749BC0F58200E57AED2E96C4C67D919045F844
Uploading logic QC8255:
        Detecting flash type...OK
                ID: 2CB3 (Micron)
                Chip: Micron 8192 Mbit NAND (large page) x16
                Logical address: 0x00000000
                Size: 1056 Mb
                Logical block size: 0x20000
                Logical blocks count: 0x2000
        OTP: LOCKED
        Reading TA security data...OK
        Opening TA...OK
Reading SIMLock data...OK
Original HwConf certificate detected
Processing SIMLock signature...OK
        Opening TA...OK
Writing SIMLock data...OK
Writing S1boot image...OK
Shutting down device...OK
Operation completed successfully. You can disconnect the phone now
FINISHED [88sec]

[spitroastxxx]

4se_x10.MOV - YouTube

spitroast

[pcs1234]

many thanks for a very detail report ,one question ,if im using a wire with a clamp on one end and a needle on the other ,should the clamp be connected to a metal part of the phone and the needle to the TP....

[pcs1234]

can i use the resurection cable for the experia mini as stated in the video,which would be the experia x10 mini cable ,are they compatible...

[..::Angel::..]

Originally Posted by pcs1234

can i use the resurection cable for the experia mini as stated in the video,which would be the experia x10 mini cable ,are they compatible...

Hi,

Yes, can use Recovery COM cables also. Look here:
Qualcomm recovery cables

BR