The new QC8255 - Page 2 - GSM-Forum

sonitex · 01-28-2013, 15:01

SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000000

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

qcReceivePacket: can't get packet start.
FAILED TO SETUP PHONE
Unlock FAILED
RUNNING S1_EROM VER "R9A021"
mt11i what about this?

darkmen · 01-28-2013, 15:14

Please add 4SE log to get the error reason
BR

AhsanNawaz · 03-29-2014, 11:32

4SE - tool 1.9.1 (S/N:0000000001AC V1.1)
Selected model: Xperia™ arc S (LT18)
Selected operation: Unlock
Selected interface: USB (BOOTROM)
Checking USB driver status...OK (SEMC Flash Device v3.0.0.0 | 11-25-2011)
Remove battery. Link the TestPoint to GND and then plug USB cable
Connected to USB1
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...
Connecting DLOAD...OK (PBL_DownloaderVER1.0)
Sending Preloader...
Error connecting device: Preloader check timed out
Note: Devices manufactured after 12W10 have no support for TestPoint operations
STOPPED [42sec]

dulox1 · 04-23-2014, 20:04

LT15, LT18, ST18, MT11, WT19 (EROM: 1241-3656 R9B031) still with the problem?

m1serwis · 04-24-2014, 12:14

Yes still all phone manufactored after 12W10 week can't unlock nothing change.

03-29-2014, 11:32	#18 (permalink)
AhsanNawaz No Life Poster Join Date: Dec 2013 Location: England Manchester Posts: 979 Member: 2081860 Status: Offline Sonork: 100.1608350 Thanks Meter: 128	lt-18 not unlock 4SE - tool 1.9.1 (S/N:0000000001AC V1.1) Selected model: Xperia™ arc S (LT18) Selected operation: Unlock Selected interface: USB (BOOTROM) Checking USB driver status...OK (SEMC Flash Device v3.0.0.0 \| 11-25-2011) Remove battery. Link the TestPoint to GND and then plug USB cable Connected to USB1 You can now release the keys and allow the process to run. Do not disconnect the phone Device identification... Connecting DLOAD...OK (PBL_DownloaderVER1.0) Sending Preloader... Error connecting device: Preloader check timed out Note: Devices manufactured after 12W10 have no support for TestPoint operations STOPPED [42sec]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
New Nokia Software!!!!!!!	Jefferson	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	52	12-30-2016 08:17
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
how the **** do i make wintesla 6.03 work	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-16-1999 08:41

01-28-2013, 15:01	#16 (permalink)
sonitex Freak Poster Join Date: Feb 2006 Posts: 392 Member: 229056 Status: Offline Thanks Meter: 95	SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED CFG:110010000000 DETACH USB CABLE FROM PHONE REMOVE BATTERY FROM PHONE ATTACH TESTPOINT PRESS "READY", THEN ATTACH USB CABLE TO PHONE PROCESSING ... REMOVE TESTPOINT NOW, THEN PRESS "READY" qcReceivePacket: can't get packet start. FAILED TO SETUP PHONE Unlock FAILED RUNNING S1_EROM VER "R9A021" mt11i what about this?

01-28-2013, 15:14	#17 (permalink)
darkmen No Life Poster Join Date: Jul 2002 Location: Ukraine Age: 44 Posts: 820 Member: 13611 Status: Offline Sonork: 1 Thanks Meter: 368	Please add 4SE log to get the error reason BR

04-23-2014, 20:04	#19 (permalink)
dulox1 Junior Member Join Date: Apr 2013 Posts: 12 Member: 1919273 Status: Offline Thanks Meter: 0	LT15, LT18, ST18, MT11, WT19 (EROM: 1241-3656 R9B031) still with the problem?

04-24-2014, 12:14	#20 (permalink)
m1serwis No Life Poster Join Date: Dec 2013 Location: Poland Posts: 656 Member: 2085623 Status: Offline Thanks Meter: 221	Yes still all phone manufactored after 12W10 week can't unlock nothing change.