w380 cid52 Failed to send VERIFY_SIGNED_HEADER, code: 0x0002 STOPPED [2sec] - GSM-Forum

speedcomtop · 04-29-2012, 04:46

4SE - tool 1.8.4 (S/N:000000000090)
Selected model: W380
Selected operation: Flash
Selected interface: USB (EROM)
Checking USB driver status...OK (SEMC Flash Device v2.2.0.5 | 2-22-2011)
Remove battery, wait a few seconds and insert it back
Plug USB cable holding "C" button
Connected to USB2
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...OK
Sending FlashLoader...OK
Chip:PNX5230 Model:W380 IMEI:04857555-048575-4 CID:52 Domain:BROWN
OTP LOCKED:0 CID:15 PAF:1
Uploading logic PNX5230:
Detecting flash type...OK
ID: 2019 (ST)
Chip: ST Sibley 512 Mbit NOR
Logical address: 0x20000000
Size: 64 Mb
W380i CID53 Red (R11CA002 | 1205-1940) MOVISTAR ES/BLUSHING SILVER
Flashing 275862244_011C2728CF50.SOFTWARE (480 blocks)...
Failed to send VERIFY_SIGNED_HEADER, code: 0x0002
STOPPED [2sec]

speedcomtop · 04-29-2012, 04:47

4SE - tool 1.8.4 (S/N:000000000090)
Selected model: W380
Selected operation: Read info
Selected interface: USB (EROM)
Checking USB driver status...OK (SEMC Flash Device v2.2.0.5 | 2-22-2011)
Remove battery, wait a few seconds and insert it back
Plug USB cable holding "C" button
Connected to USB2
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...OK
Sending FlashLoader...OK
Sending ExplorerLoader...OK
Starting GDFS service...OK
Reading GDFS security data...
Error connecting device: Unable to read GDFS, code: 0x08
STOPPED [7sec]

wgmmmx1 · 04-29-2012, 09:32

Charge battery and flash phone again this problem is becosue battery is discharged. After flash read info will work if you got error inside flashing will not work.

**darkmen** · 04-29-2012, 09:45

Hi, you have Brown (prototype) phone.
You need to use corresponding CID/Color files for this one (CID52 Brown)
Current 4SE version does not support cross-CID/color flashing for this phone.
Please read PM.

speedcomtop · 04-30-2012, 13:18

Where to download w380 CID52 files?

**darkmen** · 04-30-2012, 13:38

Hi, you need CID52 Brown flash files for this one.
We have no such files, retail only.
Check PM for info.
BR

04-29-2012, 04:46	#1 (permalink)
speedcomtop Freak Poster Join Date: Jul 2003 Location: hk Posts: 396 Member: 33368 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	w380 cid52 Failed to send VERIFY_SIGNED_HEADER, code: 0x0002 STOPPED [2sec] 4SE - tool 1.8.4 (S/N:000000000090) Selected model: W380 Selected operation: Flash Selected interface: USB (EROM) Checking USB driver status...OK (SEMC Flash Device v2.2.0.5 \| 2-22-2011) Remove battery, wait a few seconds and insert it back Plug USB cable holding "C" button Connected to USB2 You can now release the keys and allow the process to run. Do not disconnect the phone Device identification...OK Sending FlashLoader...OK Chip:PNX5230 Model:W380 IMEI:04857555-048575-4 CID:52 Domain:BROWN OTP LOCKED:0 CID:15 PAF:1 Uploading logic PNX5230: Detecting flash type...OK ID: 2019 (ST) Chip: ST Sibley 512 Mbit NOR Logical address: 0x20000000 Size: 64 Mb W380i CID53 Red (R11CA002 \| 1205-1940) MOVISTAR ES/BLUSHING SILVER Flashing 275862244_011C2728CF50.SOFTWARE (480 blocks)... Failed to send VERIFY_SIGNED_HEADER, code: 0x0002 STOPPED [2sec]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	8	05-21-2013 19:20
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	28	08-30-2012 03:40
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	12-18-2011 11:00
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	06-10-1999 22:36

04-29-2012, 04:47	#2 (permalink)
speedcomtop Freak Poster Join Date: Jul 2003 Location: hk Posts: 396 Member: 33368 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	4SE - tool 1.8.4 (S/N:000000000090) Selected model: W380 Selected operation: Read info Selected interface: USB (EROM) Checking USB driver status...OK (SEMC Flash Device v2.2.0.5 \| 2-22-2011) Remove battery, wait a few seconds and insert it back Plug USB cable holding "C" button Connected to USB2 You can now release the keys and allow the process to run. Do not disconnect the phone Device identification...OK Sending FlashLoader...OK Sending ExplorerLoader...OK Starting GDFS service...OK Reading GDFS security data... Error connecting device: Unable to read GDFS, code: 0x08 STOPPED [7sec]

04-29-2012, 09:32	#3 (permalink)
wgmmmx1 Product Supporter Join Date: Oct 2009 Location: Poland Age: 31 Posts: 6,956 Member: 1139057 Status: Offline Sonork: 100.109924 Thanks: 5,660 Thanked 3,260 Times in 1,562 Posts	Charge battery and flash phone again this problem is becosue battery is discharged. After flash read info will work if you got error inside flashing will not work.

04-29-2012, 09:45	#4 (permalink)
darkmen Product Manager Join Date: Jul 2002 Location: Ukraine Age: 33 Posts: 679 Member: 13611 Status: Offline Sonork: 100.1615288 Thanks: 60 Thanked 332 Times in 159 Posts	Hi, you have Brown (prototype) phone. You need to use corresponding CID/Color files for this one (CID52 Brown) Current 4SE version does not support cross-CID/color flashing for this phone. Please read PM.

04-30-2012, 13:18	#5 (permalink)
speedcomtop Freak Poster Join Date: Jul 2003 Location: hk Posts: 396 Member: 33368 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Where to download w380 CID52 files?

04-30-2012, 13:38	#6 (permalink)
darkmen Product Manager Join Date: Jul 2002 Location: Ukraine Age: 33 Posts: 679 Member: 13611 Status: Offline Sonork: 100.1615288 Thanks: 60 Thanked 332 Times in 159 Posts	Hi, you need CID52 Brown flash files for this one. We have no such files, retail only. Check PM for info. BR