X10i flash - GSM-Forum

spitroastxxx · 07-02-2012, 11:36

Hi ive got a X10i in for software repair done it fine but its gone again now and will not flash via USB so tried via Qulcom cables and get this problem

4SE - tool 1.8.6 (S/N:000000000298)
Selected model: Xperia™ X10 (X10)
Selected operation: Recovery
Selected writing of current IMEI
Selected interface: UART (BOOTROM)
Remove battery, wait a few seconds and insert it back
Connect recovery cable, link the TestPoint to GND, plug USB cable and press "Power" button
Connecting DLOAD...OK (PBL_DownloaderVER1.0)
Sending Preloader...OK
Connected to USB6
Sending LoaderTEST...OK
Chip:QSD8250 Model:X10i IMEI:35941903-880735-9 AID:0001 Color:RED
DEVICE_ID: 18372E22658BDE2C2C57DF0C9D2CBD7476EFD6CA
Uploading logic QSD8250:
Detecting flash type...OK
ID: 2CB3 (Micron)
Chip: Micron 8192 Mbit NAND (large page) x16
Logical address: 0x08000000
Size: 1056 Mb
OTP: LOCKED
Reading TA security data...OK
Writing S1boot image...
Failed to send EROM Image 0x17A86 / 0x17A86. MEMORY_CLASS.HASH_VER: Failed to flash block!
STOPPED [24sec]

spitroast

**darkmen** · 07-02-2012, 12:16

Hi,
Is thats the unit dies after 1 day after flash?
The flash chip seems died completely now.

spitroastxxx · 07-02-2012, 17:27

Quote:

Originally Posted by darkmen

Hi,
Is thats the unit dies after 1 day after flash?
The flash chip seems died completely now.

Hi yes its the very same phone

spitroast

spitroastxxx · 07-02-2012, 22:16

4SE - tool 1.8.6 (S/N:000000000298)
Selected model: Xperia™ X10 (X10)
Selected operation: Recovery
Selected writing of current IMEI
Selected interface: UART (BOOTROM)
Remove battery, wait a few seconds and insert it back
Connect recovery cable, link the TestPoint to GND, plug USB cable and press "Power" button
Connecting DLOAD...OK (PBL_DownloaderVER1.0)
Sending Preloader...OK
Connected to USB6
Sending LoaderTEST...OK
Chip:QSD8250 Model:X10i IMEI:35941903-880735-9 AID:0001 Color:BROWN
DEVICE_ID: 18372E22658BDE2C2C57DF0C9D2CBD7476EFD6CA
Uploading logic QSD8250:
Detecting flash type...OK
ID: 2CB3 (Micron)
Chip: Micron 8192 Mbit NAND (large page) x16
Logical address: 0x08000000
Size: 1056 Mb
OTP: LOCKED
Reading TA security data...OK
Writing S1boot image...OK
Processing hardware config for IMEI: 35941903-880735-9...OK
Processing SIMLock signature...OK
Opening TA...OK
Writing hardware config data...OK
Writing SIMLock data...OK
X10i 0001 Red (3.0.1.G.0.75 | 1235-7379/R2C) CUSTOMIZED UK/SENSUOUS BLACK
Processing 278247421_0132011F2190.SIN_FILE_SET...
Flashing image dsp1_S1-SW-LIVE-AC12-0001-S1-PARTITION.sin...OK
Flashing image fota0_S1-SW-LIVE-AC12-0001-S1-PARTITION.sin...OK
Flashing image fota1_S1-SW-LIVE-AC12-0001-S1-PARTITION.sin...OK
Flashing image kernel_S1-SW-LIVE-AC12-0001-S1-PARTITION.sin...OK
Flashing image amss_S1-SW-LIVE-AC12-0001-S1-PARTITION.sin...OK
Flashing image cache_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin...OK
Processing 277637807_0131754505B8.SIN_FILE_SET...
Flashing image amss_fs_rachael_S1-SW-LIVE-AC12-0001-S1-PARTITION.sin...OK
Flashing image userdata_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin...OK
Flashing image system_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin...OK
Shutting down device...OK
Operation completed successfully. You can disconnect the phone now
FINISHED [150sec]

I fear thou it will die again could you please suggest another flash file please i know you said this was the only UK genric one

Thank you

spitroast

**darkmen** · 07-03-2012, 09:13

Seems its not about the flash file
Need to replace flash chip

spitroastxxx · 07-03-2012, 10:40

Its working now but i think it will go again can you please recomened a UK generic flash file or a Orange UK flashfile i dont mind down grading it

spitroast

**darkmen** · 07-03-2012, 20:15

As you can see, some of NAND blocks are already corrupted
ECC helps to "cover" error bits, but when there are too much of them - it fails to read\write.
Not possible to handle this HW issue with SW method.

07-02-2012, 11:36	#1 (permalink)
spitroastxxx Freak Poster Join Date: Jan 2007 Posts: 263 Member: 428656 Status: Offline Thanks: 67 Thanked 22 Times in 18 Posts	X10i flash Hi ive got a X10i in for software repair done it fine but its gone again now and will not flash via USB so tried via Qulcom cables and get this problem 4SE - tool 1.8.6 (S/N:000000000298) Selected model: Xperia™ X10 (X10) Selected operation: Recovery Selected writing of current IMEI Selected interface: UART (BOOTROM) Remove battery, wait a few seconds and insert it back Connect recovery cable, link the TestPoint to GND, plug USB cable and press "Power" button Connecting DLOAD...OK (PBL_DownloaderVER1.0) Sending Preloader...OK Connected to USB6 Sending LoaderTEST...OK Chip:QSD8250 Model:X10i IMEI:35941903-880735-9 AID:0001 Color:RED DEVICE_ID: 18372E22658BDE2C2C57DF0C9D2CBD7476EFD6CA Uploading logic QSD8250: Detecting flash type...OK ID: 2CB3 (Micron) Chip: Micron 8192 Mbit NAND (large page) x16 Logical address: 0x08000000 Size: 1056 Mb OTP: LOCKED Reading TA security data...OK Writing S1boot image... Failed to send EROM Image 0x17A86 / 0x17A86. MEMORY_CLASS.HASH_VER: Failed to flash block! STOPPED [24sec] spitroast

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
FLASH BOX WANTED!!!!!!	J	Wanted Products	9	07-14-2012 20:42
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	7	11-17-2011 17:08
Nokia Flash Content.	Phantom	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	05-01-2000 23:28
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	08-16-1999 12:20
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	07-07-1999 12:27

07-02-2012, 12:16	#2 (permalink)
darkmen Product Manager Join Date: Jul 2002 Location: Ukraine Age: 33 Posts: 679 Member: 13611 Status: Offline Sonork: 100.1615288 Thanks: 60 Thanked 332 Times in 159 Posts	Hi, Is thats the unit dies after 1 day after flash? The flash chip seems died completely now.

07-02-2012, 22:16	#4 (permalink)
spitroastxxx Freak Poster Join Date: Jan 2007 Posts: 263 Member: 428656 Status: Offline Thanks: 67 Thanked 22 Times in 18 Posts	4SE - tool 1.8.6 (S/N:000000000298) Selected model: Xperia™ X10 (X10) Selected operation: Recovery Selected writing of current IMEI Selected interface: UART (BOOTROM) Remove battery, wait a few seconds and insert it back Connect recovery cable, link the TestPoint to GND, plug USB cable and press "Power" button Connecting DLOAD...OK (PBL_DownloaderVER1.0) Sending Preloader...OK Connected to USB6 Sending LoaderTEST...OK Chip:QSD8250 Model:X10i IMEI:35941903-880735-9 AID:0001 Color:BROWN DEVICE_ID: 18372E22658BDE2C2C57DF0C9D2CBD7476EFD6CA Uploading logic QSD8250: Detecting flash type...OK ID: 2CB3 (Micron) Chip: Micron 8192 Mbit NAND (large page) x16 Logical address: 0x08000000 Size: 1056 Mb OTP: LOCKED Reading TA security data...OK Writing S1boot image...OK Processing hardware config for IMEI: 35941903-880735-9...OK Processing SIMLock signature...OK Opening TA...OK Writing hardware config data...OK Writing SIMLock data...OK X10i 0001 Red (3.0.1.G.0.75 \| 1235-7379/R2C) CUSTOMIZED UK/SENSUOUS BLACK Processing 278247421_0132011F2190.SIN_FILE_SET... Flashing image dsp1_S1-SW-LIVE-AC12-0001-S1-PARTITION.sin...OK Flashing image fota0_S1-SW-LIVE-AC12-0001-S1-PARTITION.sin...OK Flashing image fota1_S1-SW-LIVE-AC12-0001-S1-PARTITION.sin...OK Flashing image kernel_S1-SW-LIVE-AC12-0001-S1-PARTITION.sin...OK Flashing image amss_S1-SW-LIVE-AC12-0001-S1-PARTITION.sin...OK Flashing image cache_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin...OK Processing 277637807_0131754505B8.SIN_FILE_SET... Flashing image amss_fs_rachael_S1-SW-LIVE-AC12-0001-S1-PARTITION.sin...OK Flashing image userdata_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin...OK Flashing image system_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin...OK Shutting down device...OK Operation completed successfully. You can disconnect the phone now FINISHED [150sec] I fear thou it will die again could you please suggest another flash file please i know you said this was the only UK genric one Thank you spitroast

07-03-2012, 09:13	#5 (permalink)
darkmen Product Manager Join Date: Jul 2002 Location: Ukraine Age: 33 Posts: 679 Member: 13611 Status: Offline Sonork: 100.1615288 Thanks: 60 Thanked 332 Times in 159 Posts	Seems its not about the flash file Need to replace flash chip

07-03-2012, 10:40	#6 (permalink)
spitroastxxx Freak Poster Join Date: Jan 2007 Posts: 263 Member: 428656 Status: Offline Thanks: 67 Thanked 22 Times in 18 Posts	Its working now but i think it will go again can you please recomened a UK generic flash file or a Orange UK flashfile i dont mind down grading it spitroast

07-03-2012, 20:15	#7 (permalink)
darkmen Product Manager Join Date: Jul 2002 Location: Ukraine Age: 33 Posts: 679 Member: 13611 Status: Offline Sonork: 100.1615288 Thanks: 60 Thanked 332 Times in 159 Posts	As you can see, some of NAND blocks are already corrupted ECC helps to "cover" error bits, but when there are too much of them - it fails to read\write. Not possible to handle this HW issue with SW method.