X10i flash - GSM-Forum

spitroastxxx · 07-18-2012, 13:41

4SE - tool 1.8.6 (S/N:000000000298)
Selected model: Xperia™ X10 (X10)
Selected operation: Recovery
Selected writing of current IMEI
Selected interface: UART (BOOTROM)
Remove battery, wait a few seconds and insert it back
Connect recovery cable, link the TestPoint to GND, plug USB cable and press "Power" button
Connecting DLOAD...OK (PBL_DownloaderVER1.0)
Sending Preloader...OK
Connected to USB5
Sending LoaderTEST...OK
Chip:QSD8250 Model: IMEI:00000000-000000-0 AID:0001 Color:RED
DEVICE_ID: 18372E22658BDE2C2C57DF0C9D2CBD7476EFD6CA
Uploading logic QSD8250:
Detecting flash type...OK
ID: 2CB3 (Micron)
Chip: Micron 8192 Mbit NAND (large page) x16
Logical address: 0x08000000
Size: 1056 Mb
OTP: LOCKED
Failed to read TA security data: TA_OPEN failed. MISC_CLASS.MISC_ERROR: Bad TA config
Writing S1boot image...
Failed to send EROM Image 0x17A86 / 0x17A86. MEMORY_CLASS.HASH_VER: Failed to flash block!
STOPPED [25sec]

spitroast

darkmen · 07-18-2012, 16:37

Hi,
Is that the phone that died after 1 day up?
The NAND flash chip is corrupted.
Not possible to fix it with software.
BR

spitroastxxx · 07-18-2012, 17:01

Quote:

Originally Posted by darkmen

Hi,
Is that the phone that died after 1 day up?
The NAND flash chip is corrupted.
Not possible to fix it with software.
BR

Hiya yea its the same one

spitroast

07-18-2012, 13:41	#1 (permalink)
spitroastxxx No Life Poster Join Date: Jan 2007 Posts: 546 Member: 428656 Status: Offline Thanks Meter: 54	X10i flash 4SE - tool 1.8.6 (S/N:000000000298) Selected model: Xperia™ X10 (X10) Selected operation: Recovery Selected writing of current IMEI Selected interface: UART (BOOTROM) Remove battery, wait a few seconds and insert it back Connect recovery cable, link the TestPoint to GND, plug USB cable and press "Power" button Connecting DLOAD...OK (PBL_DownloaderVER1.0) Sending Preloader...OK Connected to USB5 Sending LoaderTEST...OK Chip:QSD8250 Model: IMEI:00000000-000000-0 AID:0001 Color:RED DEVICE_ID: 18372E22658BDE2C2C57DF0C9D2CBD7476EFD6CA Uploading logic QSD8250: Detecting flash type...OK ID: 2CB3 (Micron) Chip: Micron 8192 Mbit NAND (large page) x16 Logical address: 0x08000000 Size: 1056 Mb OTP: LOCKED Failed to read TA security data: TA_OPEN failed. MISC_CLASS.MISC_ERROR: Bad TA config Writing S1boot image... Failed to send EROM Image 0x17A86 / 0x17A86. MEMORY_CLASS.HASH_VER: Failed to flash block! STOPPED [25sec] spitroast

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
Nokia Flash Content.	Phantom	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-01-2000 23:28

07-18-2012, 16:37	#2 (permalink)
darkmen No Life Poster Join Date: Jul 2002 Location: Ukraine Age: 44 Posts: 820 Member: 13611 Status: Offline Sonork: 1 Thanks Meter: 368	Hi, Is that the phone that died after 1 day up? The NAND flash chip is corrupted. Not possible to fix it with software. BR