Xperia Mt11i Neo Unlock successfully Unlocked

[great4nara]

Xperia Mt11i Neo Unlock successfully Unlocked..

4SE - tool 1.8.3 (S/N:000000000300)
Selected model: Xperia™ neo V (MT11)
Selected operation: Unlock
Selected interface: USB (BOOTROM)
Checking USB driver status...OK (SEMC Flash Device v2.2.0.5 | 2-22-2011)
Remove battery. Link the TestPoint to GND and then plug USB cable
Connected to USB2
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...
Connecting DLOAD...OK (PBL_DownloaderVER1.0)
Sending Preloader...OK
Connected to USB2
Sending LoaderTEST...OK
Chip:QC8255 Model:MT11i IMEI:35xxxxxxxxxxxxx-1 AID:0001 Color:BROWN
DEVICE_ID: 34480DD50CE26F1BA9425C2190BF4F6AA4B0D2F5
Uploading logic QC8255:
Detecting flash type...OK
ID: 2CB3 (Micron)
Chip: Micron 8192 Mbit NAND (large page) x16
Logical address: 0x00000000
Size: 1056 Mb
Logical block size: 0x20000
Logical blocks count: 0x2000
OTP: LOCKED
Reading TA security data...OK
Opening TA...OK
Reading SIMLock data...OK
Original HwConf certificate detected
Processing SIMLock signature...OK
Opening TA...OK
Writing SIMLock data...OK
Writing S1boot image...OK
Shutting down device...OK
Operation completed successfully. You can disconnect the phone now
FINISHED [82sec]

[.::koolfriend4u::.]

good news nara..

keep proceed ur success reports with 4se..

we are xpecting much more Good Reports from u.

Good going.

[archi3]

Originally Posted by great4nara

Xperia Mt11i Neo Unlock successfully Unlocked..

4SE - tool 1.8.3 (S/N:000000000300)
Selected model: Xperia™ neo V (MT11)
Selected operation: Unlock
Selected interface: USB (BOOTROM)
Checking USB driver status...OK (SEMC Flash Device v2.2.0.5 | 2-22-2011)
Remove battery. Link the TestPoint to GND and then plug USB cable
Connected to USB2
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...
Connecting DLOAD...OK (PBL_DownloaderVER1.0)
Sending Preloader...OK
Connected to USB2
Sending LoaderTEST...OK
Chip:QC8255 Model:MT11i IMEI:35xxxxxxxxxxxxx-1 AID:0001 Color:BROWN
DEVICE_ID: 34480DD50CE26F1BA9425C2190BF4F6AA4B0D2F5
Uploading logic QC8255:
Detecting flash type...OK
ID: 2CB3 (Micron)
Chip: Micron 8192 Mbit NAND (large page) x16
Logical address: 0x00000000
Size: 1056 Mb
Logical block size: 0x20000
Logical blocks count: 0x2000
OTP: LOCKED
Reading TA security data...OK
Opening TA...OK
Reading SIMLock data...OK
Original HwConf certificate detected
Processing SIMLock signature...OK
Opening TA...OK
Writing SIMLock data...OK
Writing S1boot image...OK
Shutting down device...OK
Operation completed successfully. You can disconnect the phone now
FINISHED [82sec]

Why You are using old version with bugs?

[richardex78]

Freinds

I tray to unlock a Sony Ericsson Xperia MT11. But I can´t.

The software of 4SE Tool 1.8.5 said:
Remove battery. Link the TestPoint to GND and then plug USB cable

I try two testpoint. See Picture 1 y 2.

Is correct one of this pictures ???

Please I need the correct steps.

Thanks

Picture 1
http://www.subirimagenes.net/show-im...6d2ce348657b0e

Picture 2
http://www.subirimagenes.net/show-im...45ec1822279338

**************************************
4SE LOG File
**************************************
4SE - tool 1.8.5 (S/N:13xxxxxxxxxxx)
Selected model: Xperia™ neo V (MT11)
Selected operation: Desbloqueo
Selected interface: USB (BOOTROM)
Checking USB driver status...OK (SEMC Flash Device v2.2.0.5 | 2-22-2011)
Remove battery. Link the TestPoint to GND and then plug USB cable
Abortado por el usuario

[gsm_links]

Dear richardex78


atfter link testpoint to gnd you need to connect mcro usb cables( data cables comes with the phone pack) without bettry & you do not need any special test point cable showing in your image.


Wbr

s n hasan

[richardex78]

Originally Posted by gsm_links

Dear richardex78


atfter link testpoint to gnd you need to connect mcro usb cables( data cables comes with the phone pack) without bettry & you do not need any special test point cable showing in your image.


Wbr

s n hasan

1. I connect the POINT TestPoint to a GND by a simple metal cable.
2. After connect de USB cable to PC.
3. In Device Manager create a nuevo PORT COM named:
%QcomDevice90080% (COM431)

But nothing to do

4SE - tool 1.8.5 (S/N:132XXXXXXX)
Selected model: Xperia™ neo V (MT11)
Selected operation: Unlock
Selected interface: USB (BOOTROM)
Checking USB driver status...OK (SEMC Flash Device v2.2.0.5 | 2-22-2011)Remove battery. Link the TestPoint to GND and then plug USB cable

[gsm_links]

pls check it.
easy driver installation (ADB+usb )


After instalation driver ,restart your pc & repeat process.


Wbr


s n hasan

[richardex78]

Dear gsm_link

THANKS !!!!!!!!!!!!!!!

[richardex78]

Sony Ericsson MT11i Unlock STEP


1. Install the drivers that are in the installation folder of the 4SE (Windows XP Start Button - All Programs - 4SE)
a) Install Drivers ADB
b) Install Drivers USBFlash

2. Remove the battery
3. Connect with TESTPOINT point GND (for example where you put the MicroSD)
4. Start the Unlock
5. Connect the USB cable
6. It detects the phone and displays a sign indicating TESTPOINT remove and then click Button OK
7. Continuing the process and unlocked phone in 77 seconds

[richardex78]

Sony Ericsson MT11i Unlock STEP


1. Install the drivers that are in the installation folder of the 4SE (Windows XP Start Button - All Programs - 4SE)
a) Install Drivers ADB
b) Install Drivers USBFlash

2. Remove the battery
3. Connect with TESTPOINT point GND (for example where you put the MicroSD)
4. Start the Unlock
5. Connect the USB cable
6. It detects the phone and displays a sign indicating TESTPOINT remove and then click Button OK
7. Continuing the process and unlocked phone in 77 seconds