I9003 Stuck ON Samsung Logo 100% Tested Solution - GSM-Forum

bux_harun · 02-05-2013, 22:39

1. Download and run odin.

2. Check Re-Partition, Auto Reboot and F. Reset Time.

3. Click PIT button and select this file: latona_20110114.pit

4. Put your phone into download mode: Press Volume down + Home + Power.

5. Connect USB cable and the program will detect the phone's Com number.

6. Click Start button to download the PIT file to phone.

7. After it is Done Click on Reset button, then un-select Re-Partition box.

8. Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5

9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5

10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5

11. Remove the battery, then enter Device into Download Mode again.

12. Click Start button to flash these files to phone.

13. Do not touch anything till you see PASS on the program window.

14. Just do a factory reset after flashing using recovery

Download This File

I9003BHKP8_XEGKP6_v2.3.6_Repair_Firmware.rar [Credit Tsar300]

I9003XXKB3.rar [Credit junin M.]

I9003_Odin3_v1.82

ebu mohammed-emin · 02-05-2013, 22:54

Most case hardware problem, with software not solve.
if make any photo or save something phone restart again and loop on Samsung logo!
br!

bux_harun · 02-05-2013, 23:22

Quote:

Originally Posted by ebu mohammed-emin

most case hardware problem, with software not solve.
if make any photo or save somthing phone restart again and loop on samsung logo!
br!

Wot U MEEN I M TIME PASS HIRE?

Hay I M Sol 3 headset TODAY SAM iSSUE
And I m Not TOLK hardware Relation Problem Is Software related Issue

If U Not Understand Chak Hire forum POST

http://forum.gsmhosting.com/vbb/f777...-logo-1608596/

http://forum.gsmhosting.com/vbb/f777...-logo-1606603/

http://forum.gsmhosting.com/vbb/f777...-logo-1606602/

http://forum.gsmhosting.com/vbb/f777...-logo-1601456/

http://forum.gsmhosting.com/vbb/9423055-post88.html

.:iTRi:. · 03-12-2013, 13:02

thanks i slove one with this solution but i need arabic

kariakala · 03-17-2013, 20:17

Guide = given @ tsar3000
if it is software issue ( maybe then solved)
if hardware not solved

I am facing issue here ( flashed by odin z3x 3-4 files versions no success .

http://forum.gsmhosting.com/vbb/f453...7/#post9277744

ertungan · 07-13-2013, 23:45

upp dsnt work..İnvalid md5

**chand_gee** · 07-14-2013, 00:07

if some one wrong flash or update 2.2 to 2.3.6 then phone hang on samsung and restart
then you flash with above solution its working well
--
butt if phone have hardware problem its notwork or become unknown baseband

**chand_gee** · 07-14-2013, 00:08

Quote:

Originally Posted by .:iTRi:.

thanks i slove one with this solution but i need arabic

I9003JPKP5_OJPKP6_Android_2.3.4
find this file for that
and follow above instruction

tsm2318 · 07-19-2013, 11:27

Solution here http://forum.gsmhosting.com/vbb/f777...phone-1682340/

http://forum.gsmhosting.com/vbb/f777...ution-1651837/

duncan99 · 09-04-2013, 09:52

Quote:

Originally Posted by tsm2318

Solution here http://forum.gsmhosting.com/vbb/f777...i9003-1682340/

please bro give me links to those files

JohnsonRobert · 09-16-2013, 18:04

i tried to flash my i9003 many times but not success it showing md 5 hash invalid, how can i solve this problem please help me

Hussain_Mobile · 11-12-2013, 09:39

Quote:

Originally Posted by bux_harun

1. Download and run odin.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Put your phone into download mode: Press Volume down + Home + Power.
5. Connect USB cable and the program will detect the phone's Com number.
6. Click Start button to download the PIT file to phone.
7. After it is Done Click on Reset button, then unselect Re-Partition box.
8. Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
11. Remove the battery, then enter Device into Download Mode again.
12. Click Start button to flash these files to phone.
13. Do not touch anything till you see PASS on the program window.
14. Just do a factory reset after flashing using recovery

Download This File
Hotfile.com: One click file hosting: I9003_XXKA7.rar
Hotfile.com: One click file hosting: I9003XXKB3.rar

Odin & Pit File
http://www.mediafire.com/?fixnulivqyn2xak

Thanks this solution working

i sold one phone its in my hand working welll

:::::::::: Hussain ::::::

tr3pplea · 11-22-2013, 03:29

Quote:

Originally Posted by kariakala

Guide = given @ tsar3000
if it is software issue ( maybe then solved)
if hardware not solved

I am facing issue here ( flashed by odin z3x 3-4 files versions no success .

http://forum.gsmhosting.com/vbb/f453...7/#post9277744

I carefully followed the process one after the other, my phone was successfuly flashed and did factory setting after it yet the phone still hanging on samsung logo and keep rebooting itself. Any other solution?

tr3pplea · 11-22-2013, 03:44

Quote:

Originally Posted by bux_harun

1. Download and run odin.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Put your phone into download mode: Press Volume down + Home + Power.
5. Connect USB cable and the program will detect the phone's Com number.
6. Click Start button to download the PIT file to phone.
7. After it is Done Click on Reset button, then unselect Re-Partition box.
8. Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
11. Remove the battery, then enter Device into Download Mode again.
12. Click Start button to flash these files to phone.
13. Do not touch anything till you see PASS on the program window.
14. Just do a factory reset after flashing using recovery

Download This File
Hotfile.com: One click file hosting: I9003_XXKA7.rar
Hotfile.com: One click file hosting: I9003XXKB3.rar

Odin & Pit File
http://www.mediafire.com/?fixnulivqyn2xak

I carefully followed the process one after the other, my phone was successfuly flashed and did factory setting after it yet the phone still hanging on samsung logo and keep rebooting itself. Any other solution?
*

coolmfarshard · 11-22-2013, 04:22

Also this problem coming from hardware fault can't be solved by software

Sent from my LT26i using Tapatalk

02-05-2013, 22:39	#1 (permalink)
bux_harun No Life Poster Join Date: Aug 2011 Location: United Kingdom Posts: 730 Member: 1638915 Status: Offline Thanks Meter: 432	I9003 Stuck ON Samsung Logo 100% Tested Solution 1. Download and run odin. 2. Check Re-Partition, Auto Reboot and F. Reset Time. 3. Click PIT button and select this file: latona_20110114.pit 4. Put your phone into download mode: Press Volume down + Home + Power. 5. Connect USB cable and the program will detect the phone's Com number. 6. Click Start button to download the PIT file to phone. 7. After it is Done Click on Reset button, then un-select Re-Partition box. 8. Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5 9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5 10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5 11. Remove the battery, then enter Device into Download Mode again. 12. Click Start button to flash these files to phone. 13. Do not touch anything till you see PASS on the program window. 14. Just do a factory reset after flashing using recovery Download This File I9003BHKP8_XEGKP6_v2.3.6_Repair_Firmware.rar [Credit Tsar300] I9003XXKB3.rar [Credit junin M.] I9003_Odin3_v1.82 Last edited by ...:::::NP™:::::...; 07-26-2017 at 02:01. Reason: Firmware link has been update

02-05-2013, 22:54	#2 (permalink)
ebu mohammed-emin No Life Poster Join Date: Apr 2006 Location: The Arrivals Posts: 1,437 Member: 263993 Status: Offline Sonork: 100.1612432 Thanks Meter: 173	Most case hardware problem, with software not solve. if make any photo or save something phone restart again and loop on Samsung logo! br! Last edited by ...:::::NP™:::::...; 07-26-2017 at 01:50. Reason: quote removed

03-17-2013, 20:17	#5 (permalink)
kariakala No Life Poster Join Date: Sep 2008 Location: India Posts: 1,963 Member: 851193 Status: Offline Sonork: 100.1615313 Thanks Meter: 348	Guide = given @ tsar3000 if it is software issue ( maybe then solved) if hardware not solved I am facing issue here ( flashed by odin z3x 3-4 files versions no success . http://forum.gsmhosting.com/vbb/f453...7/#post9277744 Last edited by ...:::::NP™:::::...; 07-26-2017 at 02:00. Reason: quote removed

07-19-2013, 11:27	#9 (permalink)
tsm2318 Freak Poster Join Date: Jan 2006 Location: EARTH Posts: 407 Member: 218086 Status: Offline Sonork: 0111010001011101010111010 Thanks Meter: 73	Solution here http://forum.gsmhosting.com/vbb/f777...phone-1682340/ http://forum.gsmhosting.com/vbb/f777...ution-1651837/ Last edited by ...:::::NP™:::::...; 01-23-2019 at 14:49.

09-16-2013, 18:04	#11 (permalink)
JohnsonRobert Junior Member Join Date: Aug 2013 Posts: 1 Member: 2013800 Status: Offline Thanks Meter: 0	request i tried to flash my i9003 many times but not success it showing md 5 hash invalid, how can i solve this problem please help me

03-12-2013, 13:02	#4 (permalink)
.:iTRi:. No Life Poster Join Date: Mar 2006 Location: .:iTRi:. Posts: 1,200 Member: 240068 Status: Offline Thanks Meter: 201	thanks i slove one with this solution but i need arabic

07-13-2013, 23:45	#6 (permalink)
ertungan Freak Poster Join Date: May 2011 Location: Turkey Posts: 190 Member: 1568803 Status: Offline Thanks Meter: 10	upp dsnt work..İnvalid md5

07-14-2013, 00:07	#7 (permalink)
chand_gee Moderator Join Date: Jan 2008 Location: <jeddah al saudia> Age: 36 Posts: 2,261 Member: 668050 Status: Offline Sonork: 100.1656307 Thanks Meter: 991	if some one wrong flash or update 2.2 to 2.3.6 then phone hang on samsung and restart then you flash with above solution its working well -- butt if phone have hardware problem its notwork or become unknown baseband

11-22-2013, 04:22	#15 (permalink)
coolmfarshard Freak Poster Join Date: Jul 2009 Posts: 356 Member: 1085379 Status: Offline Thanks Meter: 65	Also this problem coming from hardware fault can't be solved by software Sent from my LT26i using Tapatalk