A8000 Soft update error - GSM-Forum

itnishantha · 11-07-2016, 12:44

last week i found five samsung latest Phones with soft brick. but problem is that phones cant update. when its updating Oden showing this error.
<OSM> A8000ZHU2AOH3_A8000ZZH2AOH3_A8000ZHU2AOH3_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

i already tried many guides of forums & blogs. but still didn't get any success. please any one help me.
[IMG]

[/IMG]

xx0o0xx1 · 11-07-2016, 19:35

as it said " the fw size doesn't match the memory size of the device " u need to write the right fw
give me ur device s.n i may help

itnishantha · 11-12-2016, 16:53

thanks bro xx

customer already collect that. but if you can write article for "how to identify software with serial no, or build no " it very useful for all of us.

zakiyyboss · 11-15-2016, 18:27

You need to Flash with correct PIT file !! Use Hong Kong firmware. ANd use Pit file given below... !!

DONATE.

Vahidpappali · 01-04-2017, 10:51

Quote:

Originally Posted by itnishantha

thanks bro xx

customer already collect that. but if you can write article for "how to identify software with serial no, or build no " it very useful for all of us.

note ur serial no on imei sticker

or new models in back panel

USE SMARTSWITCH

ENTER MODEL NO

AND SN NO

SMART SWICH SHOWS THE FILE

U CAN UPDATE VIA IT

OR USE ANY SITE LIKE SAMMOBILE..

Asad ali khan · 01-04-2017, 10:57

Quote:

Originally Posted by itnishantha

last week i found five samsung latest Phones with soft brick. but problem is that phones cant update. when its updating Oden showing this error.
<OSM> A8000ZHU2AOH3_A8000ZZH2AOH3_A8000ZHU2AOH3_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

i already tried many guides of forums & blogs. but still didn't get any success. please any one help me.
[IMG]

[/IMG]

Dev-Host.org - The Ulrimate Free File Hosting Service
flash this firmware 100% tested

lerner_ · 10-05-2018, 15:03

Quote:

Originally Posted by zakiyyboss

You need to Flash with correct PIT file !! Use Hong Kong firmware. ANd use Pit file given below... !!

DONATE.

is this method is tested for such problem !!!!!!!!!

the boss atik · 07-11-2019, 10:30

Quote:

Originally Posted by zakiyyboss

You need to Flash with correct PIT file !! Use Hong Kong firmware. ANd use Pit file given below... !!

DONATE.

big thanks bro...............

11-07-2016, 12:44	#1 (permalink)
itnishantha Insane Poster Join Date: Apr 2008 Location: Still Searching Posts: 99 Member: 755485 Status: Offline Thanks Meter: 14	A8000 Soft update error last week i found five samsung latest Phones with soft brick. but problem is that phones cant update. when its updating Oden showing this error. <OSM> A8000ZHU2AOH3_A8000ZZH2AOH3_A8000ZHU2AOH3_HOME.tar .md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/003> Added!! <ID:0/003> Odin engine v(ID:3.1005).. <ID:0/003> File analysis.. <ID:0/003> SetupConnection.. <ID:0/003> Initialzation.. <ID:0/003> Get PIT for mapping.. <ID:0/003> Firmware update start.. <ID:0/003> SingleDownload. <ID:0/003> aboot.mbn <ID:0/003> NAND Write Start!! <ID:0/003> sbl1.mbn <ID:0/003> rpm.mbn <ID:0/003> tz.mbn <ID:0/003> hyp.mbn <ID:0/003> NON-HLOS.bin <ID:0/003> boot.img <ID:0/003> recovery.img <ID:0/003> system.img.ext4 <ID:0/003> FAIL! (Ext4) <ID:0/003> <ID:0/003> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1) i already tried many guides of forums & blogs. but still didn't get any success. please any one help me. [IMG][/IMG]

11-07-2016, 19:35	#2 (permalink)
xx0o0xx1 No Life Poster Join Date: Sep 2013 Location: The Hell Age: 31 Posts: 1,771 Member: 2033150 Status: Offline Thanks Meter: 624	as it said " the fw size doesn't match the memory size of the device " u need to write the right fw give me ur device s.n i may help

11-12-2016, 16:53	#3 (permalink)
itnishantha Insane Poster Join Date: Apr 2008 Location: Still Searching Posts: 99 Member: 755485 Status: Offline Thanks Meter: 14	thanks bro xx customer already collect that. but if you can write article for "how to identify software with serial no, or build no " it very useful for all of us.