G935F U3 Binary Combination File & FRP Solution Need - GSM-Forum

manbir · 09-29-2018, 11:18

i tried this U3 combination, at first i was able to boot the phone normally and followed the normal procdture to remove FRP however after flashing U3 Stock back to phone the FRP was not removed ... so i tried to flash the same combination and it does not work any more gives the same bootloader execption error .... any more ideas ???

COMBINATION_FA60_G935FXXU3ARI2_CL7964511_QB1963552 1_REV00_user_mid_noship this is not working any more ...

Pls provide any other solution if possible ..

br

ramanmultani949 · 09-29-2018, 12:29

flash that combination file with odin and after flash only bl and ap file

adnanali · 10-01-2018, 06:11

Please firmware link

manbir · 10-01-2018, 11:13

Quote:

Originally Posted by ramanmultani949

flash that combination file with odin and after flash only bl and ap file

tanx bro was able to boot it finally ..

br

amleto90 · 10-01-2018, 11:14

Quote:

Originally Posted by adnanali

Please firmware link

COMBINATION_FA60_G935FXXU3ARI2_CL7964511_QB1963552 1_REV00_user_mid_noship

****************************/file/j7asg...r.md5.zip/file

tahir0306 · 10-04-2018, 12:36

thanks bro but its not working

ahmed26h · 10-04-2018, 15:28

1- flash combination with the right security..
2- go to setting and enable oem
2- flash firmware with HOME Csc.
------
3 - if u didn't find oem , just flash from stock firmware with the right security.(sboot+boot+system+recovery+cache) .
4- after starting the phone enable oem and make reset from settings.

khanzada606 · 10-25-2018, 19:42

1- Flash combination .
2- remove FRP UART method
3- flash full stock ROM & thats it.
Additional: after removing of FRP Via UART method you can check on Download Mod that there is FRP: off
Tested many time

rajbonshi20 · 11-16-2018, 09:27

Quote:

Originally Posted by ahmed26h

1- flash combination with the right security..
2- go to setting and enable oem
2- flash firmware with HOME Csc.
------
3 - if u didn't find oem , just flash from stock firmware with the right security.(sboot+boot+system+recovery+cache) .
4- after starting the phone enable oem and make reset from settings.

thanks a lot my problem solved

hassananwer77 · 12-06-2018, 13:53

Flash Combination and Remove FRP via UART
Then flash full file

Mobile-Lab · 12-07-2018, 13:22

Quote:

Originally Posted by hassananwer77

Flash Combination and Remove FRP via UART
Then flash full file

HERE are EASY methods without PC/COMBINATION

Samsung FRP Bypass 2018 Method 1 :

Samsung FRP Bypass 2018 Method 2:

Samsung FRP Bypass 2018 Method 3:

bachagsm11 · 12-30-2018, 14:36

after combination flash go to developer options and enable stay awake and usb debugging then flash only bl and ap

09-29-2018, 11:18	#1 (permalink)
manbir No Life Poster Join Date: Apr 2010 Location: Classified Posts: 798 Member: 1280253 Status: Offline Thanks Meter: 142	G935F U3 Binary Combination File & FRP Solution Need i tried this U3 combination, at first i was able to boot the phone normally and followed the normal procdture to remove FRP however after flashing U3 Stock back to phone the FRP was not removed ... so i tried to flash the same combination and it does not work any more gives the same bootloader execption error .... any more ideas ??? COMBINATION_FA60_G935FXXU3ARI2_CL7964511_QB1963552 1_REV00_user_mid_noship this is not working any more ... Pls provide any other solution if possible .. br

09-29-2018, 12:29	#2 (permalink)
ramanmultani949 Freak Poster Join Date: Apr 2018 Location: lisbon portgual Age: 29 Posts: 156 Member: 2827177 Status: Offline Sonork: www.sonork.com Thanks Meter: 19	flash that combination file with odin and after flash only bl and ap file

10-01-2018, 06:11	#3 (permalink)
adnanali No Life Poster Join Date: Dec 2005 Location: Gujjar AJK Posts: 2,074 Member: 207308 Status: Offline Thanks Meter: 471	Please firmware link

10-04-2018, 12:36	#6 (permalink)
tahir0306 Insane Poster Join Date: Nov 2016 Posts: 86 Member: 2647181 Status: Offline Thanks Meter: 9	thanks bro but its not working

10-04-2018, 15:28	#7 (permalink)
ahmed26h Freak Poster Join Date: Jun 2017 Location: Constantine Posts: 203 Member: 2723574 Status: Offline Thanks Meter: 15	1- flash combination with the right security.. 2- go to setting and enable oem 2- flash firmware with HOME Csc. ------ 3 - if u didn't find oem , just flash from stock firmware with the right security.(sboot+boot+system+recovery+cache) . 4- after starting the phone enable oem and make reset from settings.

10-25-2018, 19:42	#8 (permalink)
khanzada606 No Life Poster Join Date: Sep 2015 Location: Earth Posts: 2,156 Member: 2455344 Status: Offline Sonork: Ask me Thanks Meter: 420	1- Flash combination . 2- remove FRP UART method 3- flash full stock ROM & thats it. Additional: after removing of FRP Via UART method you can check on Download Mod that there is FRP: off Tested many time

12-06-2018, 13:53	#10 (permalink)
hassananwer77 Insane Poster Join Date: Sep 2017 Location: Jhelum Posts: 73 Member: 2762776 Status: Offline Thanks Meter: 22	Flash Combination and Remove FRP via UART Then flash full file

12-30-2018, 14:36	#12 (permalink)
bachagsm11 Junior Member Join Date: Dec 2018 Posts: 4 Member: 2880877 Status: Offline Sonork: [email protected] Thanks Meter: 0	after combination flash go to developer options and enable stay awake and usb debugging then flash only bl and ap