G935F U3 Binary Combination File & FRP Solution Need
 

i tried this U3 combination, at first i was able to boot the phone normally and followed the normal procdture to remove FRP however after flashing U3 Stock back to phone the FRP was not removed ... so i tried to flash the same combination and it does not work any more gives the same bootloader execption error .... any more ideas ???

COMBINATION_FA60_G935FXXU3ARI2_CL7964511_QB1963552 1_REV00_user_mid_noship this is not working any more ...

Pls provide any other solution if possible ..


br

flash that combination file with odin and after flash only bl and ap file

Please firmware link

tanx bro was able to boot it finally ..


br

COMBINATION_FA60_G935FXXU3ARI2_CL7964511_QB1963552 1_REV00_user_mid_noship

****************************/file/j7asg...r.md5.zip/file

thanks bro but its not working

1- flash combination with the right security..
2- go to setting and enable oem
2- flash firmware with HOME Csc.
------
3 - if u didn't find oem , just flash from stock firmware with the right security.(sboot+boot+system+recovery+cache) .
4- after starting the phone enable oem and make reset from settings.

1- Flash combination .
2- remove FRP UART method
3- flash full stock ROM & thats it.
Additional: after removing of FRP Via UART method you can check on Download Mod that there is FRP: off
Tested many time

thanks a lot my problem solved

Flash Combination and Remove FRP via UART
Then flash full file

HERE are EASY methods without PC/COMBINATION

Samsung FRP Bypass 2018 Method 1 :



Samsung FRP Bypass 2018 Method 2:



Samsung FRP Bypass 2018 Method 3:

after combination flash go to developer options and enable stay awake and usb debugging then flash only bl and ap