IF YOU WANT MAKE A SAMSUNG S3(i9300)BOOT CARD(LOOK HERE) - Page 4 - GSM-Forum

SHIJILFONOTLY · 10-02-2013, 06:32

Quote:

Originally Posted by vijayantha

boot card make ok. after that?????? how to boot repair???????

http://forum.gsmhosting.com/vbb/f777...eapir-1720403/

peter_preeti143 · 10-04-2013, 12:01

Hello Sir
SHIJILFONOTLY
I Get This Error when boot repair i9300
this is not rom code
http://img21.imageshack.us/img21/6105/5xk3.png

bronce · 10-05-2013, 02:07

Needed PIT file for samsung GT-N7100 pls.

i need PIT file only,

GsmExpertz.Clt · 10-06-2013, 06:16

Quote:

Originally Posted by bronce

Needed PIT file for samsung GT-N7100 pls.

i need PIT file only,

you have spt just download latest version then flash it
no need any pit file with spt

Raj mobe care · 10-08-2013, 10:04

Quote:

Originally Posted by rahulk99k

SHIJIL, it support only S3 or work with other models too??

s3 amd note2(n7100)..support

shahjee · 10-09-2013, 08:50

tested with a i9300 dead repaired with this method ,
works like a charm ,

zaibi · 10-11-2013, 12:04

only work on i9300 not work on n7100

AHAMEDPONMALA · 10-17-2013, 06:36

pls share mxpit and efs eor note 2

fertxter · 10-17-2013, 09:37

tested in GT-N7100 note 2

logs

PMIC rev = PASS2(4)
HCLK = 96000000
[set_mmc_ocr] Sector Mode
[hsmmc_init] MMC card is detected
Product Name : VTU00M
CID:150100 56545530 304df112 2215ef9f
<display_card_info:1077> ext_csd
<display_card_info:1079>card_size: 15028
Total Card Size: 15029 MByte

Total Sector Count: 30777344
freq = 24MHz

MoviNand Initialization Complete!

Samsung S-Boot 4.0-20120315.121951 for GT-I9300 (Mar 15 2012 - 12:20:18)

EXYNOS4412(EVT 2.0) / 1023MB / Rev 11 / M0_TEST

pit_check_integrity: invalid pit.(0x0)
pit_check_integrity: invalid pit.(0x0)
update_guid_partition_table: There is no pit binary.
fsd_reclaim 1283: MST is not recognized(mst.magic=0x0)
fsd_reclaim 1284: MST is not recognized
fsd_reclaim 1599: Error(nErr=0x0)
fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB)
j4fs_open 153: Error(nErr=0x40000000)
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: 'param.j4fs' does not exist, make new one..
j4fs_write_file_bootloader 184: j4fs panic
fail
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: debug level file does not exist..*INCORRECT!*
init_fuel_gauge: fuelgauge power ok
init_fuel_gauge: POR status
fuelgauge_por: POR start: vcell(3695), vfocv(3772), soc(30)
fuelgauge_por: update SDI parameter
fuelgauge_por: RCOMP(0x87), TEMPCO(0x930)
fuelgauge_por: POR finish: vcell(3737), vfocv(3775), soc(29)
get_table_soc: vcell(3737) is caculated to t-soc(40.972)
init_fuel_gauge: start: vcell(3737), vfocv(3775), soc(29), table soc(40)
init_fuel_gauge: [#1] diff(11), soc(29) and table soc(40)
get_table_soc: vcell(3736) is caculated to t-soc(40.727)
init_fuel_gauge: [#1] update: vcell(3736), vfocv(3736), soc(16), table soc(40)
init_fuel_gauge: [#2] diff(24), soc(16) and table soc(40)
get_table_soc: vcell(3736) is caculated to t-soc(40.727)
init_fuel_gauge: [#2] update: vcell(3736), vfocv(3735), soc(16), table soc(40)
init_fuel_gauge: [#3] diff(24), soc(16) and table soc(40)
get_table_soc: vcell(3737) is caculated to t-soc(40.972)
init_fuel_gauge: [#3] update: vcell(3737), vfocv(3735), soc(16), table soc(40)
init_fuel_gauge: [#4] diff(24), soc(16) and table soc(40)
get_table_soc: vcell(3737) is caculated to t-soc(40.972)
init_fuel_gauge: [#4] update: vcell(3737), vfocv(3736), soc(16), table soc(40)
init_fuel_gauge: [#5] diff(24), soc(16) and table soc(40)
get_table_soc: vcell(3737) is caculated to t-soc(40.972)
init_fuel_gauge: [#5] update: vcell(3737), vfocv(3736), soc(16), table soc(40)
init_fuel_gauge: finish: vcell(3737), vfocv(3736), soc(16), table soc(40)
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3a
PMIC_ID = 0x2
PMIC_IRQSRC = 0x0
PMIC_STATUS1 = 0x10
PMIC_STATUS2 = 0x0
PMIC_PWRON = 0x2
PMIC_IRQ1 = 0xc
PMIC_IRQ2 = 0x0
s5p_check_keypad: keypad value=0x0
s5p_check_reboot_mode: INFORM3 = 0 ... skip
s5p_check_upload: MAGIC CODE=c0c0c0c0
microusb_get_attached_device: STATUS1:0x3c, 2:0x0
s5p_check_download: update mode=0
j4fs_read_file_bootloader 355: j4fs panic
s5p_check_tzsw: invalid tzsw type! dummy?
scr_draw_image: draw 'download_error.jpg'...
j4fs_read_file_bootloader 355: j4fs panic
read_param_file: 'download_error.jpg' j4fs read failed!
fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600
[ERROR:LCD] s6e8ax0_read_id : s6e8ax0_read() failed

[ERROR:LCD] s6e8ax0_read_id : s6e8ax0_read() failed

if failed the screen is blank only, but the computer is detect via download mode

thanks Mr SHIJILFONOTLY

fertxter · 10-17-2013, 09:44

again gt-i9300 done

TN default
<OK>
<OK>
[DVFS] INT(1) : 0
DRAM Type : LPDDR2 16G
[DVFS] MIF(3) : 0
[EPLL][VPLL][CLK_DIV] OK
<OK>
[LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0
[DVFS] ARM(0) : 5
[DVFS] INT(1) : 0
[DVFS] G3D(2) : 0
[DVFS] MIF(3) : 0
[SD_INIT
SDMMC_HighSpeedONE]
SD_READ: 20000 20000 0x40008000 -> 422540 usec
<OK>
Inp32(uAddr) : 0xea00007e
FW Booting
[Patch Stop] This is not Rom Code.
TN default
<OK>
<OK>
[DVFS] INT(1) : 0
DRAM Type : LPDDR2 8G
[DVFS] MIF(3) : 0
[EPLL][VPLL][CLK_DIV] OK
<OK>
[LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0
[DVFS] ARM(0) : 5
[DVFS] INT(1) : 0
[DVFS] G3D(2) : 0
[DVFS] MIF(3) : 0
[SD_INIT
SDMMC_HighSpeedONE]
SD_READ: 20000 20000 0x40008000 -> 422539 usec
<OK>
Inp32(uAddr) : 0xea00007e
FW Booting
Patch Start.
PPMIC rev = PASS2(4)
HCLK = 96000000
[set_mmc_ocr] Sector Mode
[hsmmc_init] MMC card is detected
Product Name : VTU00M
CID:150100 56545530 304df1fb e9287baf
<display_card_info:1077> ext_csd
<display_card_info:1079>card_size: 15028
Total Card Size: 15029 MByte

Total Sector Count: 30777344
freq = 24MHz

MoviNand Initialization Complete!

Samsung S-Boot 4.0-20120315.121951 for GT-I9300 (Mar 15 2012 - 12:20:18)

EXYNOS4412(EVT 1.1) / 1023MB / Rev 12 / M0_TEST

pit_check_integrity: invalid pit.(0x0)
pit_check_integrity: invalid pit.(0x0)
update_guid_partition_table: There is no pit binary.
fsd_reclaim 1283: MST is not recognized(mst.magic=0x0)
fsd_reclaim 1284: MST is not recognized
fsd_reclaim 1599: Error(nErr=0x0)
fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB)
j4fs_open 153: Error(nErr=0x40000000)
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: 'param.j4fs' does not exist, make new one..
j4fs_write_file_bootloader 184: j4fs panic
fail
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: debug level file does not exist..*INCORRECT!*
init_fuel_gauge: fuelgauge power ok
init_fuel_gauge: POR status
fuelgauge_por: POR start: vcell(4224), vfocv(4303), soc(114)
fuelgauge_por: update SDI parameter
fuelgauge_por: RCOMP(0x87), TEMPCO(0x930)
fuelgauge_por: POR finish: vcell(4226), vfocv(4471), soc(98)
get_table_soc: vcell(4226) out of range, set table soc as 100
init_fuel_gauge: start: vcell(4226), vfocv(4471), soc(98), table soc(100)
init_fuel_gauge: finish: vcell(4226), vfocv(4471), soc(98), table soc(100)
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3a
PMIC_ID = 0x2
PMIC_IRQSRC = 0x0
PMIC_STATUS1 = 0x10
PMIC_STATUS2 = 0x0
PMIC_PWRON = 0x2
PMIC_IRQ1 = 0x4
PMIC_IRQ2 = 0x0
s5p_check_keypad: keypad value=0x0
s5p_check_reboot_mode: INFORM3 = 0 ... skip
s5p_check_upload: MAGIC CODE=11c02
microusb_get_attached_device: STATUS1:0x3c, 2:0x0
s5p_check_download: update mode=0
j4fs_read_file_bootloader 355: j4fs panic
s5p_check_tzsw: invalid tzsw type! dummy?
scr_draw_image: draw 'download_error.jpg'...
j4fs_read_file_bootloader 355: j4fs panic
read_param_file: 'download_error.jpg' j4fs read failed!
fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600
a2, 60, 90,

fertxter · 10-17-2013, 09:58

Quote:

Originally Posted by peter_preeti143

Hello Sir
SHIJILFONOTLY
I Get This Error when boot repair i9300
this is not rom code
http://img21.imageshack.us/img21/6105/5xk3.png

this error is hardware problem sir

fertxter · 10-17-2013, 10:03

Quote:

Originally Posted by AHAMEDPONMALA

pls share mxpit and efs eor note 2

pit for gt-n7100 note 2

blaiseid · 11-02-2013, 17:32

I ve a question:
I ve 7 S3 i9300 and 2 Note2,which are totally off.No logo no sound no pc detection and no Download even with Jig,There is no Short in phone hardware.Kind of sudden death since no-liquid issue or not dropped.
I tried the sdcard making and the teraterm-4.78.
I insert the sdcard created ,i insert the jig or the cable from the box but no response.
All the phones dont show any activity.
Am i missing a point?
Thanks.

blaiseid · 11-03-2013, 07:46

And how long to wait after inserting the card and the jig or cable for it to boot ?

aram471 · 11-06-2013, 20:38

what about i9070??????????????

View Poll Results: THEN NEED TO BUY SAMSUNG BOOT CARD OR NOT
YES	20	37.74%
NO	33	62.26%
Voters: 53. You may not vote on this poll

10-04-2013, 12:01	#47 (permalink)
peter_preeti143 Freak Poster Join Date: Mar 2010 Location: india Posts: 413 Member: 1268699 Status: Offline Sonork: 100.1615714peter Thanks Meter: 54	Hello Sir SHIJILFONOTLY I Get This Error when boot repair i9300 this is not rom code http://img21.imageshack.us/img21/6105/5xk3.png

10-05-2013, 02:07	#48 (permalink)
bronce No Life Poster Join Date: Apr 2007 Location: Taguig CT Age: 42 Posts: 2,507 Member: 488875 Status: Offline Sonork: 100.1626294 Thanks Meter: 1,129	Needed PIT file for samsung GT-N7100 pls. i need PIT file only,

10-09-2013, 08:50	#51 (permalink)
shahjee No Life Poster Join Date: Apr 2005 Location: Gsmhosting Age: 42 Posts: 831 Member: 138809 Status: Offline Sonork: 100.99886 Thanks Meter: 79	tested with a i9300 dead repaired with this method , works like a charm ,

10-11-2013, 12:04	#52 (permalink)
zaibi No Life Poster Join Date: Aug 2007 Location: Kuwait City Posts: 555 Member: 574464 Status: Offline Thanks Meter: 39	only work on i9300 not work on n7100

10-17-2013, 06:36	#53 (permalink)
AHAMEDPONMALA Freak Poster Join Date: Mar 2008 Location: india Posts: 399 Member: 723178 Status: Offline Thanks Meter: 37	pls share mxpit and efs eor note 2

10-17-2013, 09:37	#54 (permalink)
fertxter Freak Poster Join Date: Jul 2010 Location: Manama Bahrain Posts: 272 Member: 1344255 Status: Offline Sonork: 1659066 Thanks Meter: 131	tested in GT-N7100 note 2 logs PMIC rev = PASS2(4) HCLK = 96000000 [set_mmc_ocr] Sector Mode [hsmmc_init] MMC card is detected Product Name : VTU00M CID:150100 56545530 304df112 2215ef9f <display_card_info:1077> ext_csd <display_card_info:1079>card_size: 15028 Total Card Size: 15029 MByte Total Sector Count: 30777344 freq = 24MHz MoviNand Initialization Complete! Samsung S-Boot 4.0-20120315.121951 for GT-I9300 (Mar 15 2012 - 12:20:18) EXYNOS4412(EVT 2.0) / 1023MB / Rev 11 / M0_TEST pit_check_integrity: invalid pit.(0x0) pit_check_integrity: invalid pit.(0x0) update_guid_partition_table: There is no pit binary. fsd_reclaim 1283: MST is not recognized(mst.magic=0x0) fsd_reclaim 1284: MST is not recognized fsd_reclaim 1599: Error(nErr=0x0) fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB) j4fs_open 153: Error(nErr=0x40000000) j4fs_read_file_bootloader 355: j4fs panic load_j4fs_param: 'param.j4fs' does not exist, make new one.. j4fs_write_file_bootloader 184: j4fs panic fail j4fs_read_file_bootloader 355: j4fs panic load_j4fs_param: debug level file does not exist..INCORRECT! init_fuel_gauge: fuelgauge power ok init_fuel_gauge: POR status fuelgauge_por: POR start: vcell(3695), vfocv(3772), soc(30) fuelgauge_por: update SDI parameter fuelgauge_por: RCOMP(0x87), TEMPCO(0x930) fuelgauge_por: POR finish: vcell(3737), vfocv(3775), soc(29) get_table_soc: vcell(3737) is caculated to t-soc(40.972) init_fuel_gauge: start: vcell(3737), vfocv(3775), soc(29), table soc(40) init_fuel_gauge: [#1] diff(11), soc(29) and table soc(40) get_table_soc: vcell(3736) is caculated to t-soc(40.727) init_fuel_gauge: [#1] update: vcell(3736), vfocv(3736), soc(16), table soc(40) init_fuel_gauge: [#2] diff(24), soc(16) and table soc(40) get_table_soc: vcell(3736) is caculated to t-soc(40.727) init_fuel_gauge: [#2] update: vcell(3736), vfocv(3735), soc(16), table soc(40) init_fuel_gauge: [#3] diff(24), soc(16) and table soc(40) get_table_soc: vcell(3737) is caculated to t-soc(40.972) init_fuel_gauge: [#3] update: vcell(3737), vfocv(3735), soc(16), table soc(40) init_fuel_gauge: [#4] diff(24), soc(16) and table soc(40) get_table_soc: vcell(3737) is caculated to t-soc(40.972) init_fuel_gauge: [#4] update: vcell(3737), vfocv(3736), soc(16), table soc(40) init_fuel_gauge: [#5] diff(24), soc(16) and table soc(40) get_table_soc: vcell(3737) is caculated to t-soc(40.972) init_fuel_gauge: [#5] update: vcell(3737), vfocv(3736), soc(16), table soc(40) init_fuel_gauge: finish: vcell(3737), vfocv(3736), soc(16), table soc(40) init_microusb_ic: MUIC: CONTROL1:0x1b init_microusb_ic: MUIC: CONTROL1:0x1b init_microusb_ic: MUIC: CONTROL2:0x3b init_microusb_ic: MUIC: CONTROL2:0x3a PMIC_ID = 0x2 PMIC_IRQSRC = 0x0 PMIC_STATUS1 = 0x10 PMIC_STATUS2 = 0x0 PMIC_PWRON = 0x2 PMIC_IRQ1 = 0xc PMIC_IRQ2 = 0x0 s5p_check_keypad: keypad value=0x0 s5p_check_reboot_mode: INFORM3 = 0 ... skip s5p_check_upload: MAGIC CODE=c0c0c0c0 microusb_get_attached_device: STATUS1:0x3c, 2:0x0 s5p_check_download: update mode=0 j4fs_read_file_bootloader 355: j4fs panic s5p_check_tzsw: invalid tzsw type! dummy? scr_draw_image: draw 'download_error.jpg'... j4fs_read_file_bootloader 355: j4fs panic read_param_file: 'download_error.jpg' j4fs read failed! fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600 [ERROR:LCD] s6e8ax0_read_id : s6e8ax0_read() failed [ERROR:LCD] s6e8ax0_read_id : s6e8ax0_read() failed if failed the screen is blank only, but the computer is detect via download mode thanks Mr SHIJILFONOTLY

10-17-2013, 09:44	#55 (permalink)
fertxter Freak Poster Join Date: Jul 2010 Location: Manama Bahrain Posts: 272 Member: 1344255 Status: Offline Sonork: 1659066 Thanks Meter: 131	again gt-i9300 done TN default <OK> <OK> [DVFS] INT(1) : 0 DRAM Type : LPDDR2 16G [DVFS] MIF(3) : 0 [EPLL][VPLL][CLK_DIV] OK <OK> [LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0 [DVFS] ARM(0) : 5 [DVFS] INT(1) : 0 [DVFS] G3D(2) : 0 [DVFS] MIF(3) : 0 [SD_INIT SDMMC_HighSpeedONE] SD_READ: 20000 20000 0x40008000 -> 422540 usec <OK> Inp32(uAddr) : 0xea00007e FW Booting [Patch Stop] This is not Rom Code. TN default <OK> <OK> [DVFS] INT(1) : 0 DRAM Type : LPDDR2 8G [DVFS] MIF(3) : 0 [EPLL][VPLL][CLK_DIV] OK <OK> [LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0 [DVFS] ARM(0) : 5 [DVFS] INT(1) : 0 [DVFS] G3D(2) : 0 [DVFS] MIF(3) : 0 [SD_INIT SDMMC_HighSpeedONE] SD_READ: 20000 20000 0x40008000 -> 422539 usec <OK> Inp32(uAddr) : 0xea00007e FW Booting Patch Start. PPMIC rev = PASS2(4) HCLK = 96000000 [set_mmc_ocr] Sector Mode [hsmmc_init] MMC card is detected Product Name : VTU00M CID:150100 56545530 304df1fb e9287baf <display_card_info:1077> ext_csd <display_card_info:1079>card_size: 15028 Total Card Size: 15029 MByte Total Sector Count: 30777344 freq = 24MHz MoviNand Initialization Complete! Samsung S-Boot 4.0-20120315.121951 for GT-I9300 (Mar 15 2012 - 12:20:18) EXYNOS4412(EVT 1.1) / 1023MB / Rev 12 / M0_TEST pit_check_integrity: invalid pit.(0x0) pit_check_integrity: invalid pit.(0x0) update_guid_partition_table: There is no pit binary. fsd_reclaim 1283: MST is not recognized(mst.magic=0x0) fsd_reclaim 1284: MST is not recognized fsd_reclaim 1599: Error(nErr=0x0) fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB) j4fs_open 153: Error(nErr=0x40000000) j4fs_read_file_bootloader 355: j4fs panic load_j4fs_param: 'param.j4fs' does not exist, make new one.. j4fs_write_file_bootloader 184: j4fs panic fail j4fs_read_file_bootloader 355: j4fs panic load_j4fs_param: debug level file does not exist..INCORRECT! init_fuel_gauge: fuelgauge power ok init_fuel_gauge: POR status fuelgauge_por: POR start: vcell(4224), vfocv(4303), soc(114) fuelgauge_por: update SDI parameter fuelgauge_por: RCOMP(0x87), TEMPCO(0x930) fuelgauge_por: POR finish: vcell(4226), vfocv(4471), soc(98) get_table_soc: vcell(4226) out of range, set table soc as 100 init_fuel_gauge: start: vcell(4226), vfocv(4471), soc(98), table soc(100) init_fuel_gauge: finish: vcell(4226), vfocv(4471), soc(98), table soc(100) init_microusb_ic: MUIC: CONTROL1:0x1b init_microusb_ic: MUIC: CONTROL1:0x1b init_microusb_ic: MUIC: CONTROL2:0x3b init_microusb_ic: MUIC: CONTROL2:0x3a PMIC_ID = 0x2 PMIC_IRQSRC = 0x0 PMIC_STATUS1 = 0x10 PMIC_STATUS2 = 0x0 PMIC_PWRON = 0x2 PMIC_IRQ1 = 0x4 PMIC_IRQ2 = 0x0 s5p_check_keypad: keypad value=0x0 s5p_check_reboot_mode: INFORM3 = 0 ... skip s5p_check_upload: MAGIC CODE=11c02 microusb_get_attached_device: STATUS1:0x3c, 2:0x0 s5p_check_download: update mode=0 j4fs_read_file_bootloader 355: j4fs panic s5p_check_tzsw: invalid tzsw type! dummy? scr_draw_image: draw 'download_error.jpg'... j4fs_read_file_bootloader 355: j4fs panic read_param_file: 'download_error.jpg' j4fs read failed! fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600 a2, 60, 90,

11-02-2013, 17:32	#58 (permalink)
blaiseid No Life Poster Join Date: Aug 2003 Location: Town City Age: 54 Posts: 3,485 Member: 37735 Status: Offline Sonork: 100.103255 Thanks Meter: 205	I ve a question: I ve 7 S3 i9300 and 2 Note2,which are totally off.No logo no sound no pc detection and no Download even with Jig,There is no Short in phone hardware.Kind of sudden death since no-liquid issue or not dropped. I tried the sdcard making and the teraterm-4.78. I insert the sdcard created ,i insert the jig or the cable from the box but no response. All the phones dont show any activity. Am i missing a point? Thanks.

11-03-2013, 07:46	#59 (permalink)
blaiseid No Life Poster Join Date: Aug 2003 Location: Town City Age: 54 Posts: 3,485 Member: 37735 Status: Offline Sonork: 100.103255 Thanks Meter: 205	And how long to wait after inserting the card and the jig or cable for it to boot ?

11-06-2013, 20:38	#60 (permalink)
aram471 No Life Poster Join Date: Feb 2011 Location: iraq_kurdistan_erbil Posts: 538 Member: 1510100 Status: Offline Thanks Meter: 18	what about i9070??????????????