Hi all,
I have done frp and it worked to me.
My system:
Reading phone info...
Model: SM-J600FN
AP version: J600FNXXU3ARH1
CSC version: J600FNOXM3ARH1
CP version: J600FXXU3ARH1
Product code: SEB

So writed combination, then used "GSM Flasher ADB Bypass FRP Tool", and then wrote those files with Pit file throu z3x box.
All files Here: https://drive.google.com/drive/folde...uUKfJb6MNCXBzK

which software u use for frp reset? i need also

If you don't have box you can use this free tool:

http://forum.gsmhosting.com/vbb/f162...r-pro-2200193/

i need comb file for this vers of j600fn J600FNXXU3ARH1

Did you tested this COMBINATION:

COMBINATION_FAC_FA80_J600FNXU3ARH5.zip

i tried but cannot write whole firmware i try with sboot and boot but no luck and when i try to flash full comb firmware i get firmware flashing failed trough octopus

i flash it succesfull with odin

when i flash full flash with odin i get error after writing hidden image..i flash it with
ERO-J600FNXXU3ARH1-20180828175335 from octopus support

Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> userdata.img
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 3527 M
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> vendor.img
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> modem_debug.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> cache.img
<ID:0/005> odm.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

i manage to flash phone but phone is in boot loop now..i manage to remove frp but when i reflash phone is in boot loop..i try several firmwares...imanage to do frp reset with octopus
phone was J600FNXXU3ARH1 i use comb file COMBINATION_FAC_FA80_J600FNXU3ARH5.zip and reflash phone with J600FNXXU3ARH1 and i get boot loop..i try few never firmwares..like J600FNXXU3ARK3_J600FNOVF3ARK3_VIP but no luck

now phone cant go in recovery or download mode just quickly reboot non stop..i have message on screen...fail to open recovery_cause(no such file or directory) reboot recovery cause is (unknown) support single-sku
block based OTA supported Api 3
#manual mode v.1.0.0#
E:failed to mount /cache(invalid argument)
E:cant mount /cache/recovery/last_locale

what to do? how to unbrick this phone samsung J600FN

j600gt
 

i need combination bin3......cel bricked J600GT

FRP SM-J600FN bit
 

this file helps me to make frp pass combined and the team stays in the logo in tried with several flash and the team remains in logo boot loop problem

i need comb binary 3 J600GT

#fail to open recovery_cause (No such file or directory)#
#Reboot Recovery Cause is [UNLNOWN]#
Support SINGLE-SKU
Block-Based OTA
Supported API: 3
E: failed to mount /efs (Invalid Argument)
#MANUAL MODE v.1.0.0#