*s7 s7edge s8 s8 + note 8* Dead boot recovery file - Page 2 - GSM-Forum

kkkd22 · 03-31-2018, 02:40

do u have g9550 file

freddy2302 · 04-02-2018, 20:17

[QUOTE=SHOEB AHMED;13050886]this solution test G935t
but bootloader cheng g935t convert to g935a phone download or recovery mode ok

flashing try 3 model flash file

G935TUVS2APB8_TMB2APB8

G935AUCU4BQA6_ATT4BQA6

G935UUEU4BQJ5_OYM4BQJ5

but cant flash always stop at sneding sytem.img.ext4 ...error timeout

any idea plzz help

Try to flash with Odin_v3.12.3_skip (SHA256) only the CSC. go back to download and flash the BL. then you should be able to flash the 4 files normally with standar odin. post results

Tech-Systems · 04-04-2018, 19:40

So here is my issue. I recently got into the mobile device unlocking business. I am still new at the unlocking game and I think I made a huge mistake.!!!
So I was trying to repair the IMEI on my customers phone (S8+ from AT&T) and I followed a tutorial on youtube, because z3x said the phone had to be rooted first and I got the device successfully rooted and I unlocked the carrier programming by flashing a combination file and and eng_boot file. Everything worked fine. It booted up with a modded and rooted stock rom and it was very nice and a lot faster too. Here is where it all goes downhill...
After I atempted to rewrite the IMEI number z3x said it was successful and it prompted for a reboot. It has not turned back on since and will not charge or show any signs of life at all...!
Please tell me there is a way to fix it because I don't have the money to replace my customers phone..... Any help would be appreciated.

alimawanda · 05-16-2018, 12:11

Lastmile hi could you share g930f/v test point thanks

higlander56 · 08-10-2018, 23:05

Quote:

Originally Posted by lastmile

*s7 s7edge s8 s8 + note 8*

*Debrick sbl error*

*Dead boot recovery img*
👇🏻👇🏻👇🏻👇🏻👇🏻 https://drive.google.com/drive/folde...JQbGpoHjz2bwoT
👇🏻👇🏻👇🏻👇🏻👇🏻 https://mega.nz/#!0TQjmJYZ!8JTT_Ans3...tOfAQ-AiBqqEWI

*How to do*
*Open your model recovery img.bat*
*Then type your device prot no. (Qualcomm 9008)*
*Press Enter now*
*Your device live again*
*In download mode flash it right file*

The zip file dont contain a img.bat, somebody can share img.bat for sm-g955u, thanks

irfang0349 · 08-20-2018, 10:46

G9350 unbrick file needed any one can give me ?

kakachi34 · 08-28-2018, 13:22

G9350 unbrick file needed

OSCAR MORENO · 07-17-2019, 06:21

G930U bit8 solution brick boot

03-31-2018, 02:40	#16 (permalink)
kkkd22 Crazy Poster Join Date: Dec 2017 Posts: 59 Member: 2786480 Status: Offline Thanks Meter: 14	do u have g9550 file

04-02-2018, 20:17	#17 (permalink)
freddy2302 Major Poster Join Date: Dec 2011 Location: Cuba Posts: 47 Member: 1699417 Status: Offline Sonork: freddy2302 Thanks Meter: 4	[QUOTE=SHOEB AHMED;13050886]this solution test G935t but bootloader cheng g935t convert to g935a phone download or recovery mode ok flashing try 3 model flash file G935TUVS2APB8_TMB2APB8 G935AUCU4BQA6_ATT4BQA6 G935UUEU4BQJ5_OYM4BQJ5 but cant flash always stop at sneding sytem.img.ext4 ...error timeout any idea plzz help Try to flash with Odin_v3.12.3_skip (SHA256) only the CSC. go back to download and flash the BL. then you should be able to flash the 4 files normally with standar odin. post results

04-04-2018, 19:40	#18 (permalink)
Tech-Systems Junior Member Join Date: Apr 2018 Posts: 8 Member: 2827205 Status: Offline Thanks Meter: 1	So here is my issue. I recently got into the mobile device unlocking business. I am still new at the unlocking game and I think I made a huge mistake.!!! So I was trying to repair the IMEI on my customers phone (S8+ from AT&T) and I followed a tutorial on youtube, because z3x said the phone had to be rooted first and I got the device successfully rooted and I unlocked the carrier programming by flashing a combination file and and eng_boot file. Everything worked fine. It booted up with a modded and rooted stock rom and it was very nice and a lot faster too. Here is where it all goes downhill... After I atempted to rewrite the IMEI number z3x said it was successful and it prompted for a reboot. It has not turned back on since and will not charge or show any signs of life at all...! Please tell me there is a way to fix it because I don't have the money to replace my customers phone..... Any help would be appreciated.

05-16-2018, 12:11	#19 (permalink)
alimawanda Crazy Poster Join Date: May 2012 Posts: 50 Member: 1756543 Status: Offline Thanks Meter: 3	Lastmile hi could you share g930f/v test point thanks

08-20-2018, 10:46	#21 (permalink)
irfang0349 Insane Poster Join Date: Aug 2017 Posts: 78 Member: 2745123 Status: Offline Thanks Meter: 63	G9350 unbrick file needed any one can give me ?

08-28-2018, 13:22	#22 (permalink)
kakachi34 Junior Member Join Date: Oct 2008 Posts: 5 Member: 883368 Status: Offline Sonork: ahmed Thanks Meter: 0	G9350 unbrick file needed

07-17-2019, 06:21	#23 (permalink)
OSCAR MORENO Junior Member Join Date: Oct 2013 Posts: 9 Member: 2047136 Status: Offline Thanks Meter: 1	G930U bit8 solution brick boot