galaxy ace 2 gt-i8160 after flash problem

[masoud67]

hi i have galaxy ace 2 and update it to andriod 4.1.2 but its too heavy and i wanted to downgrade it to 2.3.6 and i wanted to flash my phone with odin 3.7 when i click start button nothing has been done and an error accord . after that my phone does not start and unable to write any other firmware any file i select it wont flash and the error appear
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8160JPLK2_I8160OJPLH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> kernel.bin.md5
<ID:0/017> NAND Write Start!!
it hang on the last operation. please help me
and sorry for my bad english

[...::: SERVICETEAM89 :::...]

FOR GINGERBREAD
What's you need:

• Samsung Galaxy Ace 2 GT-I8160 with Gingerbread
• Custom Kernel with CWM or TWRP such as EX Kernel.
• SuperSU Flashable Zip Download HERE.
• A Sharp Eyes.
• Smart Brain.

Steps:

• First, Put the SuperSU Flashable Zip to your SD Card.
• Boot into Recovery Mode (Volume Up + Home + Power)
• Flash the SuperSU Flashable Zip from recovery.
• Wait
• Choose "Reboot System Now"
• Tadaa, now you have a rooted phone.

FOR JELLY BEAN
What's you need:

• Samsung Galaxy Ace 2 GT-I8160 with Jelly Bean
• Custom Kernel with CWM or TWRP such as D- Kernel. (Optional)
• Stock Kernel. But you need CWM 6 by Shaaan. Download HERE.
• SuperSU Flashable Zip Download HERE.
• A Sharp Eyes.
• Smart Brain.

Steps (Jelly Bean with Custom Kernel):

• First, Put the SuperSU Flashable Zip to your SD Card.
• Boot into Recovery Mode (Volume Up + Home + Power)
• Flash the SuperSU Flashable Zip from recovery.
• Wait
• Choose "Reboot System Now"
• Tadaa, now you have a rooted phone.

Steps (Jelly Bean with Stock Kernel):

• First, Put the SuperSU Flashable Zip to your SD Card.
• Boot into Recovery Mode (Volume Up + Home + Power)
• Flash the CWM from stock recovery.
• Flash the SuperSU Flashable Zip from CWM recovery.
• Wait.
• Choose "Reboot System Now"
• Tadaa, now you have a rooted phone.

[masoud67]

thanks but my phone do not enter the CWM and CWM and any other rom would not flash. it hang out on this step " NAND Write Start!! "

[selvam1155]

Originally Posted by masoud67

thanks but my phone do not enter the CWM and CWM and any other rom would not flash. it hang out on this step " NAND Write Start!! "

Change PIT file.... try again

[isrthr]

Originally Posted by masoud67

thanks but my phone do not enter the CWM and CWM and any other rom would not flash. it hang out on this step " NAND Write Start!! "

Flash With Spt box Firmware....

[khalafawy]

U NEED one flash 2 files arabic

Originally Posted by zameer_yus

i8160 arabic firmware + pit
nowadays i8160 comes with 4.1.2 once u downgrade it to 2.3.6 or 4.0.3 stuck on black screen so you can downgrade it with this file

GT-I8160_EUR_XX_4G.pit (3 KB)
PDA i8160_low_arabic.tar.md5 (550.0 MB)
i8160_csc_arabic.tar.md5 (117.9 MB)

i always use Odin 3.07 it works very good for me
please do not replayyyyyyyyyyyyyyy

[xx0o0xx1]

there is no 4.0.3 for i8160

[muh21013]

just downgrade it to 2.3.6 using spt box and ur probem will be solved

Sent from my SM-G850F using Tapatalk

[jhonysins]

Try with this once: https://www.samsungfirmwares.info/sa...re-flash-file/

[jhonysins]

Try with this once: https://www.samsungfirmwares.info/sa...re-flash-file/