Samsung galaxy s i9000 dead after flashing - GSM-Forum

Ahmad.Tasal · 02-10-2016, 14:37

Hi guys

I was flashing i9000 via bst key suddenly the phone turned off and not going to download mode.

Please help me

Sent from my SM-G900H using Tapatalk

Southsider2009 · 02-10-2016, 15:02

Or you mean the phone turned off because of Low battery or USB interruption?

Sent from my TECNO_P5_PLUS using Tapatalk

Ahmad.Tasal · 02-10-2016, 15:30

I tested the phone by another battery the phone didn't turn on.

Flashing feild and the phone got dead

Sent from my SM-G900H using Tapatalk

Southsider2009 · 02-10-2016, 23:04

I want to understand something... Did it got dead during flashing progress? Or it got dead after flashing. If no, was the battery too low before flash? Or you flashed the wrong firmware. If you flashed the wrong firmware, I think the download mode combination key must have altered(I mean changed). If dead during flash, ( maybe caused by interrupted cable connection), you may need to reload bootloader by the use of Z3x JTAG or RIFF BOX to repair the corrupt bootloader

Sent from my TECNO_P5_PLUS using Tapatalk

Ahmad.Tasal · 02-11-2016, 03:58

The phone got dead during flashing progress.

Can you tell me z3x jtag is apart device or this is a function in z3x ?

Thanks for your help

Sent from my SM-G900H using Tapatalk

Southsider2009 · 02-11-2016, 08:05

Z3x Box is different from Z3x JTAG. Same manufacturer but different functions. Z3x Box purposely for flashing, unlocking and repair. Z3x JTAG for reprogramming dead bootloader directly via CPU connectors. It doesn't have to do with connections via USB port. It is connected to the phone via a connector ( I forgot the name but it is made up of pin/teeth)

Sent from my TECNO_P5_PLUS using Tapatalk

02-10-2016, 14:37	#1 (permalink)
Ahmad.Tasal Junior Member Join Date: Jan 2016 Posts: 30 Member: 2512870 Status: Offline Thanks Meter: 1	Samsung galaxy s i9000 dead after flashing Hi guys I was flashing i9000 via bst key suddenly the phone turned off and not going to download mode. Please help me Sent from my SM-G900H using Tapatalk

02-10-2016, 15:02	#2 (permalink)
Southsider2009 No Life Poster Join Date: Dec 2015 Location: Somewhere on the Internet Posts: 1,162 Member: 2500215 Status: Offline Thanks Meter: 417	Or you mean the phone turned off because of Low battery or USB interruption? Sent from my TECNO_P5_PLUS using Tapatalk

02-10-2016, 15:30	#3 (permalink)
Ahmad.Tasal Junior Member Join Date: Jan 2016 Posts: 30 Member: 2512870 Status: Offline Thanks Meter: 1	I tested the phone by another battery the phone didn't turn on. Flashing feild and the phone got dead Sent from my SM-G900H using Tapatalk

02-10-2016, 23:04	#4 (permalink)
Southsider2009 No Life Poster Join Date: Dec 2015 Location: Somewhere on the Internet Posts: 1,162 Member: 2500215 Status: Offline Thanks Meter: 417	I want to understand something... Did it got dead during flashing progress? Or it got dead after flashing. If no, was the battery too low before flash? Or you flashed the wrong firmware. If you flashed the wrong firmware, I think the download mode combination key must have altered(I mean changed). If dead during flash, ( maybe caused by interrupted cable connection), you may need to reload bootloader by the use of Z3x JTAG or RIFF BOX to repair the corrupt bootloader Sent from my TECNO_P5_PLUS using Tapatalk

02-11-2016, 03:58	#5 (permalink)
Ahmad.Tasal Junior Member Join Date: Jan 2016 Posts: 30 Member: 2512870 Status: Offline Thanks Meter: 1	The phone got dead during flashing progress. Can you tell me z3x jtag is apart device or this is a function in z3x ? Thanks for your help Sent from my SM-G900H using Tapatalk

02-11-2016, 08:05	#6 (permalink)
Southsider2009 No Life Poster Join Date: Dec 2015 Location: Somewhere on the Internet Posts: 1,162 Member: 2500215 Status: Offline Thanks Meter: 417	Z3x Box is different from Z3x JTAG. Same manufacturer but different functions. Z3x Box purposely for flashing, unlocking and repair. Z3x JTAG for reprogramming dead bootloader directly via CPU connectors. It doesn't have to do with connections via USB port. It is connected to the phone via a connector ( I forgot the name but it is made up of pin/teeth) Sent from my TECNO_P5_PLUS using Tapatalk