Samsung p1000 after flash phone stuck on samsunf logo?

[nguyenms]

Originally Posted by gsmxpert

follow this guide to upgrade to 2.3.3

download these files

2.3.3 firmware Multiupload.com - upload your files to multiple file hosting sites!


mr pit http://www.thegalaxytabforum.com/ind...&attach_id=156

dbdata file http://www.thegalaxytabforum.com/ind...&attach_id=157

odin 1.85 http://www.thegalaxytabforum.com/ind...&attach_id=158





0. Preparing to Flashing the firmware

1. Take the main firmware and unzip the file using winzip or another extraction program. When it unzips you will be left w/ a .tar file. This is the file you will need to flash.

2. Unzip ODIN V1.7. You will have several files in the folder. you will use the file called Odin.exe

3. Unzip the pit file. you will be left w/ a .pit file

4. Unzip the dbdata file and you will be left w/ a file named dbdata.tar.

Take all those files and put them in a folder inside the main folder so they are in one spot and easy to find.

1. Flashing the Firmware

1. Double click ODIN.exe to run the program.

2. Make sure your tab to turned off. Hold the Power and Volume down button at the same time and it will have a android guy in a triangle w/ a shovel and hook it up to your computer. This is the download mode.

3. in the PDA section of odin place the main firmware .tar file in that section.

4. Place the .pit file in the pit section and make sure repartition is selected.

5. Hit start and it will flash the firmware.

2. Second Phase to flashing Firmware

you tab will reboot after the firmware flashes. Shut it down.

1. Place tab in DL mode again and hook it up to your computer. Power button and Volume Down at the same time.

2. Place dbdata.tar into the PDA section in ODIN (DO NOT SELECT REPARTITION)

3. Hit start and it will flash the .tar file.

4. Shut down the tab.

3. Phase Three of Flashing Firmware

We will be placing your tab into recovery mode. In Recovery Mode you will use the volume up and down keys to navigate and home key to select.

1. Hold Power and Volume up together.

2. Release Power after holding it for about 4-5 second and continue to hold the Volume Up button until recovery menu shows up.

3. Select wipe cache (When Done go to next step)

4. Select wipe data/factory reset.

5. Select reboot and you are done. You now have Android 2.3.3 Gingerbread.

Too many pattern attempts samsung p1000 : your flash file is very good. Thanks

[Riteshgpt60]

Originally Posted by ::gsmcoder::

follow this guide to upgrade to 2.3.3

download these files

2.3.3 firmware Multiupload.com - upload your files to multiple file hosting sites!


mr pit http://www.thegalaxytabforum.com/ind...&attach_id=156

dbdata file http://www.thegalaxytabforum.com/ind...&attach_id=157

odin 1.85 http://www.thegalaxytabforum.com/ind...&attach_id=158





0. Preparing to Flashing the firmware

1. Take the main firmware and unzip the file using winzip or another extraction program. When it unzips you will be left w/ a .tar file. This is the file you will need to flash.

2. Unzip ODIN V1.7. You will have several files in the folder. you will use the file called Odin.exe

3. Unzip the pit file. you will be left w/ a .pit file

4. Unzip the dbdata file and you will be left w/ a file named dbdata.tar.

Take all those files and put them in a folder inside the main folder so they are in one spot and easy to find.

1. Flashing the Firmware

1. Double click ODIN.exe to run the program.

2. Make sure your tab to turned off. Hold the Power and Volume down button at the same time and it will have a android guy in a triangle w/ a shovel and hook it up to your computer. This is the download mode.

3. in the PDA section of odin place the main firmware .tar file in that section.

4. Place the .pit file in the pit section and make sure repartition is selected.

5. Hit start and it will flash the firmware.

2. Second Phase to flashing Firmware

you tab will reboot after the firmware flashes. Shut it down.

1. Place tab in DL mode again and hook it up to your computer. Power button and Volume Down at the same time.

2. Place dbdata.tar into the PDA section in ODIN (DO NOT SELECT REPARTITION)

3. Hit start and it will flash the .tar file.

4. Shut down the tab.

3. Phase Three of Flashing Firmware

We will be placing your tab into recovery mode. In Recovery Mode you will use the volume up and down keys to navigate and home key to select.

1. Hold Power and Volume up together.

2. Release Power after holding it for about 4-5 second and continue to hold the Volume Up button until recovery menu shows up.

3. Select wipe cache (When Done go to next step)

4. Select wipe data/factory reset.

5. Select reboot and you are done. You now have Android 2.3.3 Gingerbread.

I tried your process but i got the error at last part,
Need help
http://forum.gsmhosting.com/vbb/f606...error-1546706/

[harth287]

[QUOTE=::gsmcoder::;7630642]follow these steps to recover your phone first

download this firmware

P1000JPJM5.z01


open odin

tick repartion and the other two

select p1000 hidden pit in the pit tab, google and download it
put your phone in download mode by holding volumedown+power


Does anyone know what this "hidden pit" that is referred to is? I tried googling as suggested and I can't find it. I may be being thick but could someone link to it?

Thanks

[~Hero~]

Originally Posted by ::gsmcoder::

follow this guide to upgrade to 2.3.3

download these files

2.3.3 firmware Multiupload.com - upload your files to multiple file hosting sites!


mr pit http://www.thegalaxytabforum.com/ind...&attach_id=156

dbdata file http://www.thegalaxytabforum.com/ind...&attach_id=157

odin 1.85 http://www.thegalaxytabforum.com/ind...&attach_id=158





0. Preparing to Flashing the firmware

1. Take the main firmware and unzip the file using winzip or another extraction program. When it unzips you will be left w/ a .tar file. This is the file you will need to flash.

2. Unzip ODIN V1.7. You will have several files in the folder. you will use the file called Odin.exe

3. Unzip the pit file. you will be left w/ a .pit file

4. Unzip the dbdata file and you will be left w/ a file named dbdata.tar.

Take all those files and put them in a folder inside the main folder so they are in one spot and easy to find.

1. Flashing the Firmware

1. Double click ODIN.exe to run the program.

2. Make sure your tab to turned off. Hold the Power and Volume down button at the same time and it will have a android guy in a triangle w/ a shovel and hook it up to your computer. This is the download mode.

3. in the PDA section of odin place the main firmware .tar file in that section.

4. Place the .pit file in the pit section and make sure repartition is selected.

5. Hit start and it will flash the firmware.

2. Second Phase to flashing Firmware

you tab will reboot after the firmware flashes. Shut it down.

1. Place tab in DL mode again and hook it up to your computer. Power button and Volume Down at the same time.

2. Place dbdata.tar into the PDA section in ODIN (DO NOT SELECT REPARTITION)

3. Hit start and it will flash the .tar file.

4. Shut down the tab.

3. Phase Three of Flashing Firmware

We will be placing your tab into recovery mode. In Recovery Mode you will use the volume up and down keys to navigate and home key to select.

1. Hold Power and Volume up together.

2. Release Power after holding it for about 4-5 second and continue to hold the Volume Up button until recovery menu shows up.

3. Select wipe cache (When Done go to next step)

4. Select wipe data/factory reset.

5. Select reboot and you are done. You now have Android 2.3.3 Gingerbread.

tnk u man i m just revived my p1000 only flash with dbdata file

[reserve]

solution of the problem is dbdata file

Good luck

[kmi2]

eny solution i have one tab same problem

Originally Posted by owiec77

one more thing, now after flashing with only .pit phone restart and show this
(see pict)
don't you think it's damaged memory?

Anyway Thanks for your time
BR

[Abdullah Shafiq]

Hi, could you please upload these files, I also have a tab in stuck on logo issue.

Thanks

[rajeshcellpoint]

sir we need some help

[anu335]

samsung tab p1000 Flashing Process Failed .
than warning triangle show not go to download mode
how to solve this problem.

[henimex]

same problem with anu335...

[M.S.khan]

Originally Posted by reserve

solution of the problem is dbdata file

Good luck

after flashing the error not gone and stuck on Samsung logo

by selecting pit file also not solved


finally it is done by this solution "dbdata file"