[Free] Plasma Tool v.1.0.2.2 released. Exclusive

[Flinst0n]

Plasma Tool v.1.0.2.2 released. Exclusive.

What this tool can do:

- Unlock all Sony Xperia 2010 Year (under test, private only)
- Unlock all Sony Xperia 2011 Year( with Test Point) (under test, private only)
- Flash All Sony Xperia/ Sony Mobile Android based mobile phones
- First in the World: Read Trim Area from Running OS via ADB( Android Debug Brigde, ADB - included)
- First in the World: Write Trim Area from Running OS via ADB (Android Debug Bridge, ADB - included)*
- Trim Area Backup Read using ADB/BootLoader(for test or Security reason)*
- Trim Area Backup Write using ADB/Bootloader**
- Single Trim Area element Read/Write*

* Not all TA elements can be written or read and not all Platforms support it.
** Not all TA elements can be written or read.

!!!Software require Internet Connection for all operations!!!





[download last version. link here:]

Usage:
!!!IMPORTANT!!! Before any operation with any new phone - Back it UP! Later
you can restore it if somethings gone wrong.

A) To read/write Trim Area
using ADB:
1. Connect your phone to PC using USB Cable.
2. Enable USB-Debugging in Settings->Development menu
3. Install drivers
4. Go to TA work tab, click ADB in the software and press Connect.
If you need to Cancel you can click cancel to stop operation
5. Wait software to check root in your phone and try to root it.
6. If your phone is not rooted you recieve a message how to root
your phone.
7. Click Backup TA. All your TA will be backed up and saved in new
folder, same as your imei number
8. If you need to restore phone - click Write TA from Backup
9. If you need to read/write single element: enter element number in
heximal (for example 7da) and press read/write
9a. Upon write operation you will be asked to open the file to
write, so please be ready for this file to open.

using BootLoader:
1. Training: Connect phone in Flash mode (Hold the back (or the
Volume down in new 2012+ phones)) key and connect the USB cable.
2. Install drivers (x64 or x86)
3. Check if driver install ok
4. Disconnect phone
5. Go to TA Work tab and click Bootloader
6. Click Connect button. If you need to cancel you can click cancel
to stop operation
7. Connect phone in Flash mode (Hold the back (or the Volume down in
new 2012+ phones)) key and connect the USB cable.
8. After successfull connect Click Backup TA (for your security)
9. If you need to restore click Write TA from Backup
10. If you need to read/write single element: enter element number
in heximal (for example 7da) and press read/write
10a. Upon write operation you will be asked to open the file to
write, so please be ready for this file to open.

B) To flash a S1_Boot android phone
1. Go to Flasher tab
2. Follow the procedure 1 of the read/write TA using BootLoader
(Traning)
3. Click Open firmware (acceptable formats: zipped firmware bundle,
with loader.sin inside), file format - zip or 7z (7-zip)
4. Select files to flash(eg. 1 file or All files)
5. Connect phone in Flash mode (Hold the back (or the Volume down in
new 2012+ phones)) key and connect the USB cable.
6. Install Drivers (x64 or x86 - according your system OS)
7. Stand by, software detect phone and send the loader.sin from the
archive
8. Click Flash when phone is connected and software hint says "You
can press the Flash button now"
8a. Keep in mind, the system.sin takes longer at 99%, this is ok,
need wait.

C) To unlock phone
without Test Point (2010 phones only):
1. Training: Connect phone in Flash mode (Hold the back (or the
Volume down in new 2012+ phones)) key and connect the USB cable.
2. Install Drivers (x64 or x86 - according your system OS)
3. Check if driver install ok
4. Disconnect phone
5. Enter your user id and password
6. Click unlock
7. Connect phone in Flash mode (Hold the back (or the Volume down in
new 2012+ phones)) key and connect the USB cable.
8. Follow the on screen instructions (some phones require one or two
reboot).

with Test Point:
1. Training: Connect phone in Flash mode (Hold the back (or the
Volume down in new 2012+ phones)) key and connect the USB cable.
2. Install drivers (x64 or x86)
3. Check if driver install ok
4. Disconnect phone
5. Connect the Test Point.
6. Install Drivers (x64 or x86 - according your system OS)
7. Keep the Test Point connected
8. Click Unlock
9. Stand by.
9a. Longer in description faster in process about 20 seconds.

for free login/pass contakt with me.

@mods. please stick thread

[jakoy]

pm me for the login /pass.

AND VIRUS included nice...
tia

[Flinst0n]

Themida never been virus. Run exe and dump it with WinHex and see no virus

[Flinst0n]

Root collection for 2012 Sony.

And here collection of flash files 2012 for rooting.

[Flinst0n]

Originally Posted by jakoy

can i try pass for login other link...thanks

other links for tool?

[jakoy]

Originally Posted by Flinst0n

other links for tool?

yes upload other link for the tool...

[Flinst0n]

Plasma downloads collection:

here is drivers: sony drivers
here is software: http://speedy.sh/sbcnC/release.7z
here is roor kernel flash files: https://hotfile.com/dl/193820864/531...ernels.7z.html

Main flash files will be uploaded to main site soon...

[djphonetech]

Can you upload other Link? thanks

[kevin10]

Sir FlinstOn is this tasted pls. post the logs here

[.:KHALIFA:.]

i have a u5 in hand... can it be unlocked?

[amnher16]

is this able to unlock bootloader without loosing DRM?

[amnher16]

Originally Posted by amnher16

is this able to unlock bootloader without loosing DRM?

2:50:28 PM: Connect Test Point and check drivers

2:50:53 PM: Connection in TP mode

2:50:54 PM: Connect with Test Point phone

2:50:54 PM: Cannot detect Phone

2:50:54 PM: Check TP connection and driver

I used the safety pin but can't get past

[Celmaster2]

nothing new...setool already supported..

[TestCard17]

me too can i have user and pass 2 test





bR

[Flinst0n]

Plasma Tool 1.0.2.3 Update.



Changes and Updates:
- Disabled unlocking start if credits 0 on account,
- Added new alfo for unlocking phone via TP,
- Connect Bugfix while connect phone,
- Small changes in GUI,

Download here1 or here2

Some videomanual uploaded.

flashing:

unlock:

TA job:


PLEASE USE ONLY LAST VERSION.