How to put SE SO-03C into boot load mode (try vol -) - GSM-Forum

dmobile1 · 12-09-2011, 00:56

Please any 1 have any idea how i could put my SE SO-03C into boot load mode (try vol -) i've try every thing but no success
Those bastart Octopusyyy software reck my phone after unlock and now they blame it on my hardware,
I've manage to rive the phone but no service and now phone will not go into bootload mode. my phone was working perfect before unlock.
Every 1 should becarefull using those Octopusy bastart software.

marlon2502 · 12-09-2011, 13:52

I am having similar problem my sony ericsson arc will not go in to flash mode, you found anyway to do it yet ??

dmobile1 · 12-10-2011, 00:00

it seem no 1 know any other way to do it, i've try SETool for help but now luck, even Octopus SE wouldn't be able to help after its there bloody software that cause all the problem

marlon2502 · 12-10-2011, 11:34

Right I have finaly repaired my phone after messing about, not sure how I did it seems the phone would never go into flash mode after updating my arc with ota software update and heres what I did.

When my phoe was updated by ota update it would not switch on at all it was bricked, so I plugged the phone into octopus software and clicked repair ta ( Trim Area), now the phone turned on but the software was corrupt, the phone would not do a full reset, it thought there was no internal memory so would not download anything on market place etc, it was basicaly corrupt and when I tried to repair it it would not go into flash mode anymore by holding the back button, and believe me I tried but the reading the full flash using octopus software and test point still worked.

So after so much reading and failed attempts to put the phone in flash mode I downloaded wotan server and installed the software and I tried to put the phone into flash mode again holding the back button to no avail, but I left the wotan server software trying to connect to the phone and turned the phone on, now when I turned the phone on PC companion recognized the phone so I tried to update the phone software using pc companion but it said there was no update for my phone, so I took the battery off and tried to connect the phone into flash tool holding the back button and wala it worked, but I noticed something if you leave it to long it will not connect again into flash mode and you have to go threw the hole process again, make sure usb debugging is unticked and make sure unknown sources is not enabled, and if it wont go into flash mode again, turn phone on and connect to pc companion again and then try and update threw it, when it tells you it cant on a repair quickly take the battery out and have your software ready and use flashtool to flash full rom on again and this should fix your problem did mine and I have been searching allover, if it doesnt work remember having wotan server running in the background trying to connect to the phone while using pc companion may have helped but im not sure its worth a try but mine is fixed now again, and im glad thought my phone was knackered, anyway hope this helps anyone with same issue on xperia phones.

12-09-2011, 00:56	#1 (permalink)
dmobile1 Freak Poster Join Date: Jun 2008 Posts: 347 Member: 803622 Status: Online Thanks: 806 Thanked 27 Times in 22 Posts	How to put SE SO-03C into boot load mode (try vol -) Please any 1 have any idea how i could put my SE SO-03C into boot load mode (try vol -) i've try every thing but no success Those bastart Octopusyyy software reck my phone after unlock and now they blame it on my hardware, I've manage to rive the phone but no service and now phone will not go into bootload mode. my phone was working perfect before unlock. Every 1 should becarefull using those Octopusy bastart software.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	8	05-21-2013 19:20
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	28	08-30-2012 03:40
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	7	07-18-2012 07:57
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	12-18-2011 11:00
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	06-10-1999 22:36

12-09-2011, 13:52	#2 (permalink)
marlon2502 Junior Member Join Date: Feb 2006 Posts: 35 Member: 233736 Status: Offline Thanks: 1 Thanked 1 Time in 1 Post	I am having similar problem my sony ericsson arc will not go in to flash mode, you found anyway to do it yet ??

12-10-2011, 00:00	#3 (permalink)
dmobile1 Freak Poster Join Date: Jun 2008 Posts: 347 Member: 803622 Status: Online Thanks: 806 Thanked 27 Times in 22 Posts	it seem no 1 know any other way to do it, i've try SETool for help but now luck, even Octopus SE wouldn't be able to help after its there bloody software that cause all the problem

12-10-2011, 11:34	#4 (permalink)
marlon2502 Junior Member Join Date: Feb 2006 Posts: 35 Member: 233736 Status: Offline Thanks: 1 Thanked 1 Time in 1 Post	Right I have finaly repaired my phone after messing about, not sure how I did it seems the phone would never go into flash mode after updating my arc with ota software update and heres what I did. When my phoe was updated by ota update it would not switch on at all it was bricked, so I plugged the phone into octopus software and clicked repair ta ( Trim Area), now the phone turned on but the software was corrupt, the phone would not do a full reset, it thought there was no internal memory so would not download anything on market place etc, it was basicaly corrupt and when I tried to repair it it would not go into flash mode anymore by holding the back button, and believe me I tried but the reading the full flash using octopus software and test point still worked. So after so much reading and failed attempts to put the phone in flash mode I downloaded wotan server and installed the software and I tried to put the phone into flash mode again holding the back button to no avail, but I left the wotan server software trying to connect to the phone and turned the phone on, now when I turned the phone on PC companion recognized the phone so I tried to update the phone software using pc companion but it said there was no update for my phone, so I took the battery off and tried to connect the phone into flash tool holding the back button and wala it worked, but I noticed something if you leave it to long it will not connect again into flash mode and you have to go threw the hole process again, make sure usb debugging is unticked and make sure unknown sources is not enabled, and if it wont go into flash mode again, turn phone on and connect to pc companion again and then try and update threw it, when it tells you it cant on a repair quickly take the battery out and have your software ready and use flashtool to flash full rom on again and this should fix your problem did mine and I have been searching allover, if it doesnt work remember having wotan server running in the background trying to connect to the phone while using pc companion may have helped but im not sure its worth a try but mine is fixed now again, and im glad thought my phone was knackered, anyway hope this helps anyone with same issue on xperia phones.