GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > GSM & CDMA Phones / Tablets Software & Hardware Area > Sony Ericsson > Sony Android based phones

Sony Android based phones General SONY Android based phones discussion, firmwares, solution, root, help

Reply
 
LinkBack Thread Tools Display Modes
Old 06-26-2016, 16:46   #31 (permalink)
Junior Member
 
Join Date: Jun 2016
Location: kuwait
Posts: 2
Member: 2581214
Status: Offline
Thanks Meter: 0
sir pls help sony ericson U1i SI 1227-0923


Quote:
Originally Posted by jamesjerss View Post
Yes yu can fix but yu need Boot files for c6603

i vil make thread for Sony Xperia z Series

please just stock on logo .what would be the possible solution plaese help thanks
  Reply With Quote
Old 07-16-2016, 09:55   #32 (permalink)
No Life Poster
 
sebY7676's Avatar
 
Join Date: Nov 2007
Location: Romania,Sinaia
Posts: 1,193
Member: 637351
Status: Offline
Thanks Meter: 167
C5303 repair boot successfully

Code:
16/07/2016 11:31:54 Welcome S1 Tool [28.02.2015].
16/07/2016 11:31:54 That is small and crippled subset of SETOOL2 service tool.
16/07/2016 11:31:59  
16/07/2016 11:31:59 SELECT FIRMWARE PACKAGES
16/07/2016 11:31:59 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
16/07/2016 11:32:00 CHECKING PACKAGES ...
16/07/2016 11:32:00  
16/07/2016 11:32:00 DETACH USB CABLE FROM PHONE
16/07/2016 11:32:00 REMOVE BATTERY FROM PHONE
16/07/2016 11:32:00 ATTACH TESTPOINT
16/07/2016 11:32:00 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
16/07/2016 11:32:00  
16/07/2016 11:33:42 will use DLOAD protocol ... 
16/07/2016 11:33:42 0808010600900000
16/07/2016 11:33:42 0D0F50424C5F446C6F6164564552322E30
16/07/2016 11:33:42 162001000100
16/07/2016 11:33:42 17004001000100E1507E00
16/07/2016 11:33:42 PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
16/07/2016 11:33:43 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
16/07/2016 11:33:43 PROCESSING ...
16/07/2016 11:33:44 REMOVE TESTPOINT NOW, THEN PRESS "READY"
16/07/2016 11:33:44  
16/07/2016 11:34:21 Emergency loader uploaded ...
16/07/2016 11:34:23  
16/07/2016 11:34:23 RUNNING S1_PRELOADER VER "R5G008"
16/07/2016 11:34:23 LOADER AID: 0001
16/07/2016 11:34:24 DEVICE ID: CC64EE04
16/07/2016 11:34:24 FLASH ID: "00FE/004E003F"
16/07/2016 11:34:24 LOADER VERSION: "R5G008"
16/07/2016 11:34:24  
16/07/2016 11:34:24 WRITING PACKAGES ...
16/07/2016 11:34:24 Processing package
16/07/2016 11:34:24 C:\Documents and Settings\Gsm-Service\Desktop\sony\S1Boot_R11B023_HWID7E50E1.SIN_FILE_SET
16/07/2016 11:34:24  
16/07/2016 11:34:24 Processing ACPU files
16/07/2016 11:34:24 PROCESSING: boot.sin
16/07/2016 11:34:27 no update files in package
16/07/2016 11:34:27 FINISHED
16/07/2016 11:34:27 Elapsed:148 secs.
  Reply With Quote
The Following User Says Thank You to sebY7676 For This Useful Post:
Old 08-09-2016, 12:03   #33 (permalink)
Junior Member
 
Join Date: Aug 2016
Posts: 39
Member: 2609438
Status: Offline
Thanks Meter: 12
Broken power inductor

Hi all, anyone knows the characteristics of the power inductor indicated in the picture?

Due to a fall, has been fractured and my C5303 will not power on.

Thanks a lot!

Last edited by shayo7; 08-09-2016 at 12:07. Reason: Correction.
  Reply With Quote
Old 09-26-2016, 09:17   #34 (permalink)
Freak Poster
 
Join Date: Aug 2012
Location: Nepal
Posts: 241
Member: 1792542
Status: Offline
Sonork: 100.1672411
Thanks Meter: 36
Donate money to this user
link not work

Quote:
Originally Posted by jamesjerss View Post
Sony Xperia SP C5303 / C5306 / M35h Dead Boot Repair






Bricked phone symptoms:
  • can't power on after flash,
  • no lcd or led reaction for power button,
  • no lcd or led reaction for charger,
  • no lcd or led reaction if phone is connected to PC,
  • your PC can't detect your phone with vol-,
  • phone does not vibrate when holding vol+ and power together.
Repair steps:


Test mode point Posted By NikkyM



Firstly connect turned off bricked phone to your PC. If phone will be detected in device manager as:


Code:
qhusb_dload device
You are lucky and this is the end of the first step for you. Just disconnect phone.

If your phone can't be detected at all, you must find testpoint. Disassemble your phone
remove battery and connect each golden point on main board one by one to metal shield and attach usb cable. If your phone will be detected in device manager as flash device or something like that you've found testpoint. Don't forget to take a picture of main board and mark testpoint nd post here

Download All FilesHere

Download and run this s1tool:

Download boot firmware for your Sony Xperia SP (extract it from rar):
In S1tool choose S1 EMERGENCY mode, press Flash button, select Sony Xperia SP boot firmware .sin_file_set file,

Press Testpoint READY button

and if your phone is detected as qhusb_dload device, just attach usb cable. If not, perform all steps from point 3 (connect testpoint to GND and attach USB cable).

When drivers will be installed and phone will be detected, program will ask you to disconnect testpoint. Disconnect testpoint from GND and press Testpoint READY button.

After that phone will load emergency s1 loader, re-enumerate usb, load s1 loader and flash selected boot firmware.



Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.

SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1507E00
PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9 EC7074DDAE8B05CDC8E1
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

Emergency loader uploaded ...

RUNNING S1_PRELOADER VER "R5G008"
LOADER AID: 0001
DEVICE ID: 2078EB03
FLASH ID: "00FE/004E003F"
LOADER VERSION: "R5G008"

WRITING PACKAGES ...
Processing package
C:\Users\Administrator\Desktop\S1Boot_R11B023_HWID 7E50E1.SIN_FILE_SET

Processing ACPU files
PROCESSING: boot.sin
no update files in package
FINISHED
Elapsed:29 secs.


After Repair Done Flash vit firmware.


Source:sony.yt

PLEASE DON'T SAY THANKSJUST PRESS BUTTON
BUTTON


cant open link can you resend it sir
  Reply With Quote
Old 10-13-2016, 15:25   #35 (permalink)
Insane Poster
 
Join Date: Jan 2008
Posts: 85
Member: 685001
Status: Offline
Thanks Meter: 18
Quote:
Originally Posted by jamesjerss View Post
Sony Xperia SP C5303 / C5306 / M35h Dead Boot Repair






Bricked phone symptoms:
  • can't power on after flash,
  • no lcd or led reaction for power button,
  • no lcd or led reaction for charger,
  • no lcd or led reaction if phone is connected to PC,
  • your PC can't detect your phone with vol-,
  • phone does not vibrate when holding vol+ and power together.
Repair steps:


Test mode point Posted By NikkyM



Firstly connect turned off bricked phone to your PC. If phone will be detected in device manager as:


Code:
qhusb_dload device
You are lucky and this is the end of the first step for you. Just disconnect phone.

If your phone can't be detected at all, you must find testpoint. Disassemble your phone
remove battery and connect each golden point on main board one by one to metal shield and attach usb cable. If your phone will be detected in device manager as flash device or something like that you've found testpoint. Don't forget to take a picture of main board and mark testpoint nd post here

Download All FilesHere

Download and run this s1tool:

Download boot firmware for your Sony Xperia SP (extract it from rar):
In S1tool choose S1 EMERGENCY mode, press Flash button, select Sony Xperia SP boot firmware .sin_file_set file,

Press Testpoint READY button

and if your phone is detected as qhusb_dload device, just attach usb cable. If not, perform all steps from point 3 (connect testpoint to GND and attach USB cable).

When drivers will be installed and phone will be detected, program will ask you to disconnect testpoint. Disconnect testpoint from GND and press Testpoint READY button.

After that phone will load emergency s1 loader, re-enumerate usb, load s1 loader and flash selected boot firmware.



Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.

SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1507E00
PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9 EC7074DDAE8B05CDC8E1
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

Emergency loader uploaded ...

RUNNING S1_PRELOADER VER "R5G008"
LOADER AID: 0001
DEVICE ID: 2078EB03
FLASH ID: "00FE/004E003F"
LOADER VERSION: "R5G008"

WRITING PACKAGES ...
Processing package
C:\Users\Administrator\Desktop\S1Boot_R11B023_HWID 7E50E1.SIN_FILE_SET

Processing ACPU files
PROCESSING: boot.sin
no update files in package
FINISHED
Elapsed:29 secs.


After Repair Done Flash vit firmware.


Source:sony.yt

PLEASE DON'T SAY THANKSJUST PRESS BUTTON
BUTTON


Sir i have sony experia Z japan
SO-02e
after flash this model piece gone in dead mode
No led No power No vibrate
qsusb loader error show
Sir kindley help me how to solve this problem
  Reply With Quote
Old 01-06-2017, 14:06   #36 (permalink)
Junior Member
 
Join Date: Aug 2014
Posts: 11
Member: 2246840
Status: Offline
Thanks Meter: 3
Please Give me the flash file
  Reply With Quote
Old 04-12-2017, 07:50   #37 (permalink)
Freak Poster
 
Join Date: Apr 2012
Location: Rangpur
Posts: 101
Member: 1747434
Status: Offline
Sonork: 5400
Thanks Meter: 11
Sony Xperia SP C5303 Dead After Flash

And
I am try to Boot repair by your Gsm forum solution




but next step how to solve ?

plz video guide need
  Reply With Quote
Old 07-25-2017, 14:29   #38 (permalink)
No Life Poster
 
maxpro12's Avatar
 
Join Date: Aug 2010
Location: SearchinG ...
Age: 33
Posts: 1,549
Member: 1369772
Status: Offline
Thanks Meter: 271
Quote:
Originally Posted by jamesjerss View Post
Sony Xperia SP C5303 / C5306 / M35h Dead Boot Repair






Bricked phone symptoms:
  • can't power on after flash,
  • no lcd or led reaction for power button,
  • no lcd or led reaction for charger,
  • no lcd or led reaction if phone is connected to PC,
  • your PC can't detect your phone with vol-,
  • phone does not vibrate when holding vol+ and power together.
Repair steps:


Test mode point Posted By NikkyM



Firstly connect turned off bricked phone to your PC. If phone will be detected in device manager as:


Code:
qhusb_dload device
You are lucky and this is the end of the first step for you. Just disconnect phone.

If your phone can't be detected at all, you must find testpoint. Disassemble your phone
remove battery and connect each golden point on main board one by one to metal shield and attach usb cable. If your phone will be detected in device manager as flash device or something like that you've found testpoint. Don't forget to take a picture of main board and mark testpoint nd post here

Download All FilesHere

Download and run this s1tool:

Download boot firmware for your Sony Xperia SP (extract it from rar):
In S1tool choose S1 EMERGENCY mode, press Flash button, select Sony Xperia SP boot firmware .sin_file_set file,

Press Testpoint READY button

and if your phone is detected as qhusb_dload device, just attach usb cable. If not, perform all steps from point 3 (connect testpoint to GND and attach USB cable).

When drivers will be installed and phone will be detected, program will ask you to disconnect testpoint. Disconnect testpoint from GND and press Testpoint READY button.

After that phone will load emergency s1 loader, re-enumerate usb, load s1 loader and flash selected boot firmware.



Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.

SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1507E00
PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9 EC7074DDAE8B05CDC8E1
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

Emergency loader uploaded ...

RUNNING S1_PRELOADER VER "R5G008"
LOADER AID: 0001
DEVICE ID: 2078EB03
FLASH ID: "00FE/004E003F"
LOADER VERSION: "R5G008"

WRITING PACKAGES ...
Processing package
C:\Users\Administrator\Desktop\S1Boot_R11B023_HWID 7E50E1.SIN_FILE_SET

Processing ACPU files
PROCESSING: boot.sin
no update files in package
FINISHED
Elapsed:29 secs.


After Repair Done Flash vit firmware.


Source:sony.yt

PLEASE DON'T SAY THANKSJUST PRESS BUTTON
BUTTON



Link not work please upload again

Last edited by maxpro12; 07-25-2017 at 14:36.
  Reply With Quote
Old 01-21-2018, 17:24   #39 (permalink)
Junior Member
 
Join Date: Apr 2007
Posts: 9
Member: 483105
Status: Offline
Thanks Meter: 0
any working link. please
  Reply With Quote
Old 04-17-2018, 03:53   #40 (permalink)
Freak Poster
 
Join Date: Jul 2010
Posts: 210
Member: 1343269
Status: Offline
Thanks Meter: 11
please need a good link, and test point pic, thanks
  Reply With Quote
Old 08-13-2018, 21:41   #41 (permalink)
Crazy Poster
 
Join Date: Aug 2006
Posts: 55
Member: 325835
Status: Offline
Thanks Meter: 8
link is broken, repost plssss
  Reply With Quote
Old 10-09-2018, 22:54   #42 (permalink)
Junior Member
 
Join Date: Oct 2018
Posts: 1
Member: 2870757
Status: Offline
Thanks Meter: 0
thanks for information
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 18:32.



Powered by Searchlight © 2018 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.43792 seconds with 7 queries

SEO by vBSEO