LG P970 Tutorial: how to unbrick your phone

[...:::SHAMIM:::...]

Bricked my phone after trying out CM7 and then flashing Stock ROM via KDZ_FW_UPD without wiping all data.
Found a way how to fix my problem. This should work for almost all bricked phones.

Remember, this will wipe ALL DATA from your phone. I'm not responsible if something happens with your P970. Do at your own risk.

You will need:
Drivers for P970;
KDZ_FW_UPD_EN
UpTestEX_mod2_marwin
WindowsEnablerv1.1
Download

Start from here if it's first time (no drivers installed, etc):
1) Install all drivers (from Drivers folder);
2) Disable LGE Virtual Modem (Control Panel > System > Hardware > Device Manager);
[IMG]http://i.*****.com/zOtdu.jpg[/IMG]


Start from here if drivers already installed:
3) Run msxml.msi (in KDZ_FW_UPD folder);
4) Delete mfc42.dll (from KDZ_FW_UPD folder);
5) Run WindowsEnabler.exe and set it to ON;
6) Run UpTestEX_mod2_marwin.exe;
7) Set your phone to S/W Upgrade mode (take out battery, while pressing Volume Up, plug USB cable).

[IMG]http://i.*****.com/HiBC4.jpg[/IMG]


1) Select KDZ file (download from here);
2) Click "CSE web upgrade test", then "Upgrade Start".

Chose your language and wait till phone reboots. It will take some time and could look like nothing is going on. If you see something similar to this (on your phone) for a moment, everything went OK.

[IMG]http://i.*****.com/6THYX.jpg[/IMG]

[cela_relly]

Can you upload again ?
Thanks 1