ls980 device model is different - GSM-Forum

Achyut · 02-15-2016, 07:30

LG ls980
i modified build.prop for unlock purpose but now the phone is showing LG logo then blank display. I tried to flash via LG FLASH TOOLS but it shows "device model is different" but in download mode the model is correct ie ls980

I modified the following things in build.prop
FROM
ro.carrier=unknown
ro.build.target_operator=SPR
persist.service.crash.enable=0
ro.telephony.default_network=10
telephony.lteOnCdmaDevice=1

TO
ro.carrier=spr
ro.build.target_operator=spr
persist.service.crash.enable=1
ro.telephony.default_network=0
telephony.lteOnCdmaDevice=0

please help me to unbrick
I read on the internet to modify file model number via hex editor, but to which model do i modify, actual model is ls980 and it also shows ls980 in download mode too

Achyut · 02-15-2016, 09:23

problem solved by using this dll "LGUP_8974.dll"

mughal42090 · 10-23-2016, 19:39

You are genius you save from lots of ebarrasment

calciumoxy · 06-11-2017, 04:44

please when i click on ok it pops up a message "Wrong DLL file". what should i do? thanks

02-15-2016, 07:30	#1 (permalink)
Achyut Freak Poster Join Date: Sep 2006 Posts: 276 Member: 360614 Status: Offline Thanks Meter: 63	ls980 device model is different LG ls980 i modified build.prop for unlock purpose but now the phone is showing LG logo then blank display. I tried to flash via LG FLASH TOOLS but it shows "device model is different" but in download mode the model is correct ie ls980 I modified the following things in build.prop FROM ro.carrier=unknown ro.build.target_operator=SPR persist.service.crash.enable=0 ro.telephony.default_network=10 telephony.lteOnCdmaDevice=1 TO ro.carrier=spr ro.build.target_operator=spr persist.service.crash.enable=1 ro.telephony.default_network=0 telephony.lteOnCdmaDevice=0 please help me to unbrick I read on the internet to modify file model number via hex editor, but to which model do i modify, actual model is ls980 and it also shows ls980 in download mode too

02-15-2016, 09:23	#2 (permalink)
Achyut Freak Poster Join Date: Sep 2006 Posts: 276 Member: 360614 Status: Offline Thanks Meter: 63	problem solved by using this dll "LGUP_8974.dll"

10-23-2016, 19:39	#3 (permalink)
mughal42090 Junior Member Join Date: Oct 2016 Posts: 1 Member: 2640491 Status: Offline Thanks Meter: 0	You are genius you save from lots of ebarrasment

06-11-2017, 04:44	#4 (permalink)
calciumoxy Junior Member Join Date: Jun 2017 Posts: 1 Member: 2725947 Status: Offline Thanks Meter: 0	please when i click on ok it pops up a message "Wrong DLL file". what should i do? thanks