Samsung mini S7100 SPD Android - black screen after format Dragon Box
 

The problem - hangs on the splash screen "android"
Delete User Data menu rekovery - the result is not achieved.
http://s017.radikal.ru/i427/1303/31/961711b8fbdf.jpg

Dragon Box firmware does not read.
http://s017.radikal.ru/i411/1303/bb/692e42b36b99.jpg
http://s018.radikal.ru/i514/1303/69/8d0f1613fb86.jpg

Black screen after format Dragon Box
http://i052.radikal.ru/1303/0a/bea460eac90b.jpg
http://i023.radikal.ru/1303/47/c9d38a962deb.jpg

Help to find the firmware for this phone.
http://s005.radikal.ru/i210/1303/55/9f660d6fae41.jpg
http://s017.radikal.ru/i400/1303/38/2e2be121aecb.jpg


Help me to find firmware for factory flasher. (in *pack format)

flash reading working well i check my self

Yes - works, but not on all models;)
Up to this point I have also worked and is now considered firmware fails.

Program hangs when reading ....
http://s018.radikal.ru/i514/1303/69/8d0f1613fb86.jpg

I have one like this!
Do you find firware?

Use Volcano Slect boot-14 in SPD 6620/8810 And Just do Format only Format

Well, exactly AFTER volcano format, phone gone brick...

p.s. after that i was trying to flash random .pac and brick it finally (no response now) :(

this is epic fail, or there is something that can heel it? (boot repeir or anything else)

Help me to find firmware Samsung S7100 SPD Android for factory flasher. (in *pack format), Thanks in advance children!

need flash for this model ... who may have a reading or firmware

In my case just hangs and then goes ...

Tool + rom :
phan mem s7100 ok - Download - 4shared

Brilliant! Where did you get it?

Just to confirm that it worked for me, as well. :)
Thanks man!

Here is the way how:
0. PC with Windows XP. For me it did not worked on Win 7
1. You have to install drivers and download and run ChannelServer, before ResearchDownload.
2. Follow the steps from word doc named "M9....", which is in the package(it is on Chinese, but have a pictures).
3. After erasing full flash, phone will be dead.
4. Before flashing (after erase), do not forget to select nvitem file from the package, and to uncheck all Backup items. Any checked will result with flashing failure
5. If you have problems with connecting dead phone, just leave USB cable plugged in the phone, remove battery, hold volume down and insert battery, again. Couple times, if needed, until RD find the phone.

test full flash ok.thanks

Kèo ngọt quá cụ ạ Thanks You:)

Hi bro and thanks
 

ur a very nice men to share that thanks bro;););):d