Tell me any China hardwere problem.i will Try to solve it only in one hour

[Jiorel]

Hi, I have ZOPO ZP998, MediaTek MT6592, Imei invalid, baseband version: Unknown. It is not software problem, I will try all repair imei toll. Some time imei is valid but no network. Tenks!!!

[Jiorel]

and log from jurasik uniandroid tool READ CPU INFO:

Device CPU Info :
---------------------------------------------------------------------
Processor : ARMv7 Processor rev 4 (v7l)

processor : 0

BogoMIPS : 1159.06



Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt

CPU implementer : 0x41

CPU architecture: 7

CPU variant : 0x0

CPU part : 0xc07

CPU revision : 4



Hardware : MT6592

Revision : 0000

Serial : 0000000000000000

---------------------------------------------------------------------

[Jiorel]

Problem was in cpu. Rehot help me.

[helpful-man]

Originally Posted by Jiorel

Hi, I have ZOPO ZP998, MediaTek MT6592, Imei invalid, baseband version: Unknown. It is not software problem, I will try all repair imei toll. Some time imei is valid but no network. Tenks!!!

Bro try to imei repair with nv file tested by me many mt6592 cpu

[umar.jamil]

Q MOBILE E890 battery error problem... any solution???/

[helpful-man]

Originally Posted by umar.jamil

Q MOBILE E890 battery error problem... any solution???/

it's bsi connection problem check bsi connection no need to replace charging ic

[periquitodel]

I have a chinese phone to repair: ibold Navy (In the PCB I can see a sticker: Model: V5U, and a lot of references).
The phone don't turn on. The battery is correct and when I connect to PC does nothing.
When I disassembly the phone, I realize that lcd flex connector its burned.

With a lot of patience I change connector.

the following occurs:
- Only with battery doesn't turn on, like dead.
- With battery and connected to PC, does nothing.
-Only connected to PC (without battery),the three buttons below (back, menu, home) blinking white light, but the phone doesn't turn on.

I checked if there was short between + and - of the battery connector with a Power Supply, but indicates 0.00A, so its all good.

What are indicating those lights? What can I do?

I take photos of the burned connector, and PCB, but I can't share because I don't have 10 posts.

Thanks a lot

[tom950]

Kingelon G9000 MTK6592

Touchscreen fails to respond to touch. Have to turn off and on a few times then it will respond. Sometimes it just won't budge and I leave it alone for a while then try again and it works. Once it responds to touch it works perfectly

[periquitodel]

Anyone knows why blink white led of the three buttons below (back, menu, home) when I connect to PC? Two post above I explain that.

Thanks a lot!

[santoshpradhan]

gionee s80 not charging but volt found 3.5 in batery connector

[helpful-man]

Originally Posted by santoshpradhan

gionee s80 not charging but volt found 3.5 in batery connector

1st try to change 6leg charging ic

[SphunaR]

I have Samsung Galaxy S4 - MediaTek but I don't know what is it.
How I can find model?

I have problem with it - IMEI = Unkown.
How I can repair it?

[tom950]

try mtkdroidtools to find details on phone

[SphunaR]

OK, thank you!
So, this is:

Hardware: MT6575
Model: GT-I9500

IMEI 1 : null
IMEI 2 : null

And now, can you tell me how I can change IMEI?
Can I flash polish language for this phone?

[helpful-man]

Originally Posted by SphunaR

OK, thank you!
So, this is:

Hardware: MT6575
Model: GT-I9500

IMEI 1 : null
IMEI 2 : null

And now, can you tell me how I can change IMEI?
Can I flash polish language for this phone?

here is solution

IMEI &SN Writer

imei&sn writer v1.5.3 - Download - 4shared

DB FILE

MT6575 by maroof A. - 4shared

Only For Repair Original IMEI