Hard Reset motorola blur MB300 - GSM-Forum

tuban_gsm · 10-24-2010, 08:00

is any other way for hard reset motorola MB300...?
I use these way but does't work.

"1. Power off phone.
2. Hold camera button and power on phone at the same time.
3. Release the camera button when prompted to.
4. You will see a message screen telling you to press the up or down volume button
5. Press and HOLD the down volume key (ignore message 'Volume Up Key Pressed')
6. When triangle and phone screen appears
7. Press on the screen just above the back key
8. You will now see the "Motorola system recovery" menu
At this point you will have three choices:

1. reboot system now [Menu+Back]
2. apply ssdcrad:update.zip [Alt+S]
3. wipedata/factory reset [Alt+W]
You can simply tap an item to select it.

At the bottom of the screen you can select OK to apply your choice from the menu.

There is also an opportunity to select Hide on the bottom left, I don't know what that does (I tried it and nothing happened).

Selecting Wipe data/factory reset and tapping Ok and the screen changes to a box and a phone (Get it - out of the box) and you see what is happening on the phone.
pick 2
-- Wiping data...
Formatting DATA:...
Formatting CACHE:...
Data Wipe Complete.

Press Menu+Back to reboot

pressing Menu+Back did nothing for me so I tapped 'reboot system now' on the menu and Ok.

The phone restarted and took me through the setup prompts."

when triangle and phone appear,and I press the back key but display no changes,just on triangle and phone logo.

thanks before.

ck.sufail · 11-01-2010, 17:37

my set canot wipie/factory reset in this metherd

tonygsm20 · 11-10-2010, 20:17

tested in 2 phones. thanks

josebraga · 11-26-2010, 22:55

I have a motorola Blur that after rebooting it does not open but the configurations.

what to do now?

mrfixit · 11-27-2010, 00:10

keep trying until it finally give u the config screen

khehra.jassi · 04-24-2011, 15:59

my motorola mb300 start up failed when i start mobile ih hangs on starting logo. please help

KHJAMAL · 09-24-2011, 21:14

For me work 100% on MB300

akhil_bbsr · 10-24-2011, 16:34

Press on the screen just above the back key
You will now see the "Motorola system recovery" menu

IN MY CASE AFTER PRESSING BACK KEY NO RECOVERY MENU COMING..ONLY triangle ON phone screen

ANYONE HELP ME OUT

khehra.jassi · 10-29-2011, 19:27

sir please also post how to flash motorola mb300.

brooke-chloe · 10-14-2012, 12:24

did you figure it out mine is the same

Promo87 · 08-12-2013, 12:59

Nopes, don't have any other way. For me these ones work. If it's not working with you do consult at a store.

Nii Ayikai · 04-15-2014, 15:08

100% working,thanks vary much

Louis1er · 06-06-2015, 11:50

Quote:

Originally Posted by akhil_bbsr

Press on the screen just above the back key
You will now see the "Motorola system recovery" menu

IN MY CASE AFTER PRESSING BACK KEY NO RECOVERY MENU COMING..ONLY triangle ON phone screen

ANYONE HELP ME OUT

Touch screen just up the back button

10-24-2010, 08:00	#1 (permalink)
tuban_gsm No Life Poster Join Date: Sep 2007 Location: Bali Island - Indonesia Posts: 1,491 Member: 589534 Status: Offline Thanks Meter: 251	Hard Reset motorola blur MB300 is any other way for hard reset motorola MB300...? I use these way but does't work. "1. Power off phone. 2. Hold camera button and power on phone at the same time. 3. Release the camera button when prompted to. 4. You will see a message screen telling you to press the up or down volume button 5. Press and HOLD the down volume key (ignore message 'Volume Up Key Pressed') 6. When triangle and phone screen appears 7. Press on the screen just above the back key 8. You will now see the "Motorola system recovery" menu At this point you will have three choices: 1. reboot system now [Menu+Back] 2. apply ssdcrad:update.zip [Alt+S] 3. wipedata/factory reset [Alt+W] You can simply tap an item to select it. At the bottom of the screen you can select OK to apply your choice from the menu. There is also an opportunity to select Hide on the bottom left, I don't know what that does (I tried it and nothing happened). Selecting Wipe data/factory reset and tapping Ok and the screen changes to a box and a phone (Get it - out of the box) and you see what is happening on the phone. pick 2 -- Wiping data... Formatting DATA:... Formatting CACHE:... Data Wipe Complete. Press Menu+Back to reboot pressing Menu+Back did nothing for me so I tapped 'reboot system now' on the menu and Ok. The phone restarted and took me through the setup prompts." when triangle and phone appear,and I press the back key but display no changes,just on triangle and phone logo. thanks before.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My 5110 v5.11 have a strange error.., it resets it self every 60second	luuk	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	24	08-11-2006 15:29
how can you reset the life timer without using a data cable for a 5125 TDMA phone?	PiNoY_bOy204	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-23-2001 12:46
HOW TO RESET SECURITY CODE IN NOKIA 6210	ed2k_7	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	10	05-26-2001 05:33
5190 patial flashes - why are they so hard to find?	Bads	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	04-14-2001 03:18
I have unlcoker for 51/61/32 for all new version for exchange Motorola 3*88 unlocker!	MC	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	11-14-1999 13:02

11-01-2010, 17:37	#2 (permalink)
ck.sufail Freak Poster Join Date: Dec 2009 Location: UAE Age: 33 Posts: 235 Member: 1197163 Status: Offline Sonork: 100.1611369 Thanks Meter: 10	my set canot wipie/factory reset in this metherd

11-10-2010, 20:17	#3 (permalink)
tonygsm20 Freak Poster Join Date: Nov 2009 Location: Lima - Peru Posts: 199 Member: 1168095 Status: Offline Sonork: 100.1602891 Thanks Meter: 13	tested in 2 phones. thanks

11-26-2010, 22:55	#4 (permalink)
josebraga Freak Poster Join Date: Aug 2008 Location: Fortaleza-Ce Posts: 353 Member: 850071 Status: Offline Thanks Meter: 114	I have a motorola Blur that after rebooting it does not open but the configurations. what to do now?

11-27-2010, 00:10	#5 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	keep trying until it finally give u the config screen

04-24-2011, 15:59	#6 (permalink)
khehra.jassi Freak Poster Join Date: Sep 2010 Age: 32 Posts: 253 Member: 1395786 Status: Offline Sonork: 100.1621056 Thanks Meter: 16	my motorola mb300 start up failed when i start mobile ih hangs on starting logo. please help

09-24-2011, 21:14	#7 (permalink)
KHJAMAL Registered User Join Date: May 2005 Location: My Office Posts: 1,009 Member: 143939 Status: Offline Thanks Meter: 264	For me work 100% on MB300

10-24-2011, 16:34	#8 (permalink)
akhil_bbsr No Life Poster Join Date: May 2006 Location: MOBILE SOFTZONE BHUBANESWAR IN Posts: 3,509 Member: 271478 Status: Offline Sonork: 1590868 Thanks Meter: 1,070	Press on the screen just above the back key You will now see the "Motorola system recovery" menu IN MY CASE AFTER PRESSING BACK KEY NO RECOVERY MENU COMING..ONLY triangle ON phone screen ANYONE HELP ME OUT

10-29-2011, 19:27	#9 (permalink)
khehra.jassi Freak Poster Join Date: Sep 2010 Age: 32 Posts: 253 Member: 1395786 Status: Offline Sonork: 100.1621056 Thanks Meter: 16	sir please also post how to flash motorola mb300.

10-14-2012, 12:24	#10 (permalink)
brooke-chloe Junior Member Join Date: Oct 2012 Posts: 1 Member: 1824910 Status: Offline Thanks Meter: 0	did you figure it out mine is the same

08-12-2013, 12:59	#11 (permalink)
Promo87 No Life Poster Join Date: Mar 2013 Location: NewYork Age: 32 Posts: 682 Member: 1900437 Status: Offline Thanks Meter: 113	Nopes, don't have any other way. For me these ones work. If it's not working with you do consult at a store.

04-15-2014, 15:08	#12 (permalink)
Nii Ayikai Freak Poster Join Date: Oct 2010 Location: Accra-Ghana Posts: 127 Member: 1412214 Status: Offline Thanks Meter: 6	100% working,thanks vary much