Motorola droid XT912

[amanvir]

How to enter unlock code in this Phone?????

[flow_17]

check this #073887*

[amanvir]

Not worked.................

[Burebista]

Originally Posted by amanvir

How to enter unlock code in this Phone?????

This phone is not locked;
you need to enable the gsm band in it.
Regards!

[amanvir]

Originally Posted by Burebista

This phone is not locked;
you need to enable the gsm band in it.
Regards!

I tried tht already but no to way change tht setting.....if u know how to do tht plz share here step by step?

[tripple_a]

Motorola RAZR XT910 Unlocking Instructions:

1. Input a non accepted simcard (This model requires a Micro Simcard)
2. Motorola Phone will display enter "Sim network unlock PIN"
3. Input the unlock code that was emailed to you
4. Phone will display "Network Unlock Successful"

[amanvir]

Originally Posted by tripple_a

Motorola RAZR XT910 Unlocking Instructions:

1. Input a non accepted simcard (This model requires a Micro Simcard)
2. Motorola Phone will display enter "Sim network unlock PIN"
3. Input the unlock code that was emailed to you
4. Phone will display "Network Unlock Successful"

Already tried with this way but Phone not asking for to enter the network unlock code.

[Burebista]

XT912 is for Verizon and it has only cdma band enabled in it and the best is that is not locked;
When you insert a nonVerizon sim card you get the message: "This SIM card is from an unknown source!"

To make it work just download Radiocomm 11.12.2 from here: RadioComm_v11.12.2_Install.zip , after this connect the phone to the pc and select pc mode.
In radiocomm go to ma/common/mdm 6x00
go to settings/usb/pst usb drivers
switch to ftm common 1 and wait for the phone to make it purple or green
on the upper side in NVAcces got to value 1877 NV_RF_BC_CONFIG_I
Read the value from the device and after that replace first 16 digits with: 8703E804000200
write data back and restart.
Insert an gsm card into the phone and the gsm band will be enabled
The solution that I explained here already is posted on xda forum; all the credits go to them
I just only apply it with succes on several xt912.
Regards!

[amanvir]

After switch to ftm common 1, phone not making anything in green or purple.....??????

[Burebista]

Originally Posted by amanvir

After switch to ftm common 1, phone not making anything in green or purple.....??????

In the menu on the phone just select pc mode and after the selection the button will be green

and check your pc drivers

[amanvir]

in nv access after i select the value, when i pressing the read button its shwoing like this

Sending 'NVRead' command with data '5507000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000000' to the radio...
Sent to radio: 26550700000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000000021CC7E
Returned from radio:
NVRead ==>FAILED
Driver answer ==> -256
Error Description ==> PST: Handle to device is invalid - no device present
Time to execute command: 0 seconds.
Command timeout set to : 15 seconds.

and read button colour change to red

plz let me know where i doing mistake?????

[darkromance]

hi amanvir i've your same problem

Do you have any clue to solve?

[amanvir]

No bro not yet I waiting for Burebista reply. i tried it on 2 diff machines but same problem........

[cesartefacto]

Originally Posted by Burebista

XT912 is for Verizon and it has only cdma band enabled in it and the best is that is not locked;
When you insert a nonVerizon sim card you get the message: "This SIM card is from an unknown source!"

To make it work just download Radiocomm 11.12.2 from here: RadioComm_v11.12.2_Install.zip , after this connect the phone to the pc and select pc mode.
In radiocomm go to ma/common/mdm 6x00
go to settings/usb/pst usb drivers
switch to ftm common 1 and wait for the phone to make it purple or green
on the upper side in NVAcces got to value 1877 NV_RF_BC_CONFIG_I
Read the value from the device and after that replace first 16 digits with: 8703E804000200
write data back and restart.

Insert an gsm card into the phone and the gsm band will be enabled
The solution that I explained here already is posted on xda forum; all the credits go to them
I just only apply it with succes on several xt912.
Regards!

hi mr Burebista i make this but not work for me

[Burebista]

Originally Posted by cesartefacto

hi mr Burebista i make this but not work for me

Hello,
if you did exactly like's here, surelly will be OK.
Just go at the networks in the phone menu and check if the gsm band is activated.
Regards!

On some phone you'll get the same error message but will work without problems.