Renault 1.6 16V immo emulator - GSM-Forum

roibix · 05-05-2011, 09:21

Hello!
I have a Renault Scenic 1.6 16V K4M engine.After few ignition problems I opened the ECU Sirius 32N and i saw that the water entered in the ecu because it is placed in the worst possible place(thank you RENAULT!

)
I found the same ECU at the junk yard and now I am working to reset the ecu to accept the immo code from the car.
I would like to cancel the immo system because I have only one key and I don't trust in this system so I would like to install a ''new''ECM and an emulator.(avr or pic version)
I found on the forum this subject but it's closed, nobody is able to give me the pass for the rar files.
So,if anybody have the solution I am wainting for you help!Thank you!

freewillover · 05-05-2011, 09:34

Can you post dump of both ECU here. I may not canceal IMMO but make it work with new as old.

skyline-GTR · 05-05-2011, 16:08

do you have 29f200 inside, and is that ecu same like this on picture?? Sirius 32.JPG - 0.41MB

roibix · 05-06-2011, 11:41

Yes it's exactly the same PCB.For the moment I am waiting for the adapter sop44-dip32 so i can read the eprom.(it should arrive in one week max I know that for the 1.4litre version it's possible to immo off directly by reprogramming the eprom 29f200 but for the 1.6litre(my case) i need an emulator and i don't have the diagrams and the dump for this emulator.Thanks!

freewillover · 05-06-2011, 20:16

Never work on this type.

skyline-GTR · 05-07-2011, 17:37

just read both 29f200 from original ecu and that buyed at a junk yard then will try make immo off sulution

roibix · 05-07-2011, 21:21

Ok!As soon as i'll have the adapter I will post post both dumps

asliyucegsm · 07-20-2013, 17:00

thank you friend good

hmilycar · 08-23-2013, 02:45

After decoding of Renault injection computer using RENAULT RESET TOOL or by entering security code,
in most cases you can start engine, but some of injection computers can not operate without immobiliser
code stored in their memory.Diesel EDC15C3, DCU3R and MSA15, petrol SIRIUS32 (except those for 1.4
Lengine) and FENIX5 for 2.0L 16V engine require working unlocked (with good key)immobiliser unit or
Renault immobiliser emulator. Use together with RENAULTECU DECODER for a complete kit.

Look more information on renault immo emulator

or email to [email protected],I offer you more professional knowledge。

**shooting@orange** · 08-23-2013, 07:46

Quote:

Originally Posted by hmilycar

After decoding of Renault injection computer using RENAULT RESET TOOL or by entering security code,
in most cases you can start engine, but some of injection computers can not operate without immobiliser
code stored in their memory.Diesel EDC15C3, DCU3R and MSA15, petrol SIRIUS32 (except those for 1.4
Lengine) and FENIX5 for 2.0L 16V engine require working unlocked (with good key)immobiliser unit or
Renault immobiliser emulator. Use together with RENAULTECU DECODER for a complete kit.

Look more information on renault immo emulator

or email to [email protected],I offer you more professional knowledge。

Please add "City" to profile to comply with the rules here

br

05-05-2011, 09:21	#1 (permalink)
roibix Junior Member Join Date: Apr 2011 Location: France Clermont Ferrand Age: 43 Posts: 5 Member: 1548669 Status: Offline Thanks Meter: 1	Renault 1.6 16V immo emulator Hello! I have a Renault Scenic 1.6 16V K4M engine.After few ignition problems I opened the ECU Sirius 32N and i saw that the water entered in the ecu because it is placed in the worst possible place(thank you RENAULT!) I found the same ECU at the junk yard and now I am working to reset the ecu to accept the immo code from the car. I would like to cancel the immo system because I have only one key and I don't trust in this system so I would like to install a ''new''ECM and an emulator.(avr or pic version) I found on the forum this subject but it's closed, nobody is able to give me the pass for the rar files. So,if anybody have the solution I am wainting for you help!Thank you!

05-06-2011, 11:41	#4 (permalink)
roibix Junior Member Join Date: Apr 2011 Location: France Clermont Ferrand Age: 43 Posts: 5 Member: 1548669 Status: Offline Thanks Meter: 1	immo off Yes it's exactly the same PCB.For the moment I am waiting for the adapter sop44-dip32 so i can read the eprom.(it should arrive in one week max I know that for the 1.4litre version it's possible to immo off directly by reprogramming the eprom 29f200 but for the 1.6litre(my case) i need an emulator and i don't have the diagrams and the dump for this emulator.Thanks!

05-07-2011, 21:21	#7 (permalink)
roibix Junior Member Join Date: Apr 2011 Location: France Clermont Ferrand Age: 43 Posts: 5 Member: 1548669 Status: Offline Thanks Meter: 1	wainting for adapter Ok!As soon as i'll have the adapter I will post post both dumps

08-23-2013, 02:45	#9 (permalink)
hmilycar Junior Member Join Date: Jul 2013 Location: USA Posts: 19 Member: 1975446 Status: Offline Sonork: 518100 Thanks Meter: 5	Re:Renault 1.6 16V immo emulator After decoding of Renault injection computer using RENAULT RESET TOOL or by entering security code, in most cases you can start engine, but some of injection computers can not operate without immobiliser code stored in their memory.Diesel EDC15C3, DCU3R and MSA15, petrol SIRIUS32 (except those for 1.4 Lengine) and FENIX5 for 2.0L 16V engine require working unlocked (with good key)immobiliser unit or Renault immobiliser emulator. Use together with RENAULTECU DECODER for a complete kit. Look more information on renault immo emulator or email to [email protected],I offer you more professional knowledge。 Last edited by shooting@orange; 08-23-2013 at 07:44. Reason: Advert

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
DES key Driver	black	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	02-08-2014 04:50
8810 mbus-cable	zfrank	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-19-1999 13:12

05-05-2011, 09:34	#2 (permalink)
freewillover No Life Poster Join Date: Nov 2008 Location: Africa Posts: 2,624 Member: 909783 Status: Offline Thanks Meter: 829	Can you post dump of both ECU here. I may not canceal IMMO but make it work with new as old.

05-05-2011, 16:08	#3 (permalink)
skyline-GTR Freak Poster Join Date: Jan 2009 Location: Bosanska Krupa / BiH Posts: 136 Member: 939775 Status: Offline Thanks Meter: 52	do you have 29f200 inside, and is that ecu same like this on picture?? Sirius 32.JPG - 0.41MB

05-06-2011, 20:16	#5 (permalink)
freewillover No Life Poster Join Date: Nov 2008 Location: Africa Posts: 2,624 Member: 909783 Status: Offline Thanks Meter: 829	Never work on this type.

05-07-2011, 17:37	#6 (permalink)
skyline-GTR Freak Poster Join Date: Jan 2009 Location: Bosanska Krupa / BiH Posts: 136 Member: 939775 Status: Offline Thanks Meter: 52	just read both 29f200 from original ecu and that buyed at a junk yard then will try make immo off sulution

07-20-2013, 17:00	#8 (permalink)
asliyucegsm Freak Poster Join Date: Dec 2004 Location: turkiye kirikkale Age: 58 Posts: 365 Member: 97854 Status: Offline Thanks Meter: 169	thank you friend good