GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus JTAG
Reload this Page huawei LDN-L21 dead boot [Answered]
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
Page 1 of 2 1 2
 
LinkBack Thread Tools Display Modes
Old 04-10-2019, 22:38   #1 (permalink)
No Life Poster
 
Pastime_GSM's Avatar
 
Join Date: Aug 2012
Location: under pross
Posts: 2,469
Member: 1798174
Status: Offline
Sonork: 100.114149
Thanks Meter: 1,048
huawei LDN-L21 dead boot [Answered]

huawei y7 2018 ldn-l21 detected only as Qualcomm HS-USB QDLoader 9008
is it possible to repair with octoplus pro jtag??


Welcome to Octoplus Pro JTAG Software version 1.7.6. Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic EMV Smartcard Reader 0


Model Settings:
Interface : USB


Model Settings:
Interface : USB
Core : Auto Detect
Loader : Auto Detect


Connecting...
Finished calculating
Searching loader...
Loader found:
Core : Qualcomm MSM8937
Loader : QLoader_MSM8937_V39
Sending loader...OK.
Loader successfully initialized.


Device : CoreID_0004F0E1
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW:
  Reply With Quote
Old 04-11-2019, 08:39   #2 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,848
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,413
Hello.

If You have another correctly working phone and You can read full flash from it or maybe You have full flash backup, then You can try to write it in order to restore you device.
  Reply With Quote
The Following User Says Thank You to Octopus box For This Useful Post:
Old 04-11-2019, 09:46   #3 (permalink)
No Life Poster
 
Pastime_GSM's Avatar
 
Join Date: Aug 2012
Location: under pross
Posts: 2,469
Member: 1798174
Status: Offline
Sonork: 100.114149
Thanks Meter: 1,048
Quote:
Originally Posted by Octopus box View Post
Hello.

If You have another correctly working phone and You can read full flash from it or maybe You have full flash backup, then You can try to write it in order to restore you device.

how to read full flash from working phone i'm new with jtag tool
thank you in advance
  Reply With Quote
Old 04-11-2019, 10:43   #4 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,848
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,413
As i can see You have manage to Connect your device via USB. Try to perform Read opeation and save into *.bin file.
  Reply With Quote
The Following User Says Thank You to Octopus box For This Useful Post:
Old 04-17-2019, 18:19   #5 (permalink)
No Life Poster
 
Pastime_GSM's Avatar
 
Join Date: Aug 2012
Location: under pross
Posts: 2,469
Member: 1798174
Status: Offline
Sonork: 100.114149
Thanks Meter: 1,048
Quote:
Originally Posted by Octopus box View Post
As i can see You have manage to Connect your device via USB. Try to perform Read opeation and save into *.bin file.
i follow the instruction but i get xxx.mpt file not xxx.bin ...need some provide please..
file is too large which partitions select!!
  Reply With Quote
Old 04-17-2019, 18:24   #6 (permalink)
No Life Poster
 
Pastime_GSM's Avatar
 
Join Date: Aug 2012
Location: under pross
Posts: 2,469
Member: 1798174
Status: Offline
Sonork: 100.114149
Thanks Meter: 1,048
Model Settings:
Interface : USB
Core : Auto Detect
Loader : Auto Detect

Connecting...
Finished calculating
Searching loader...
Loader found:
Core : Qualcomm MSM8937
Loader : QLoader_MSM8937_V39
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_0004F0E1
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT (00000000, 00000022) 17 KB
P01: sbl1 (00000022, 00000400) 512 KB
P02: rpm (00000422, 00000400) 512 KB
P03: tz (00000822, 00001000) 2048 KB
P04: devcfg (00001822, 00000200) 256 KB
P05: dsp (00001A22, 00008000) 16 MB
P06: keystore (00009A22, 00000400) 512 KB
P07: frp (00009E22, 00000400) 512 KB
P08: mota (0000A222, 00000400) 512 KB
P09: dip (0000A622, 00000800) 1024 KB
P10: syscfg (0000AE22, 00000400) 512 KB
P11: lksecapp (0000B222, 00000100) 128 KB
P12: apdp (0000B322, 00000200) 256 KB
P13: msadp (0000B522, 00000200) 256 KB
P14: dpo (0000B722, 00000010) 8 KB
P15: fsc (0000B732, 00000002) 1024 b
P16: ssd (0000B734, 00000010) 8 KB
P17: bootfail_info (0000B744, 00001000) 2048 KB
P18: pad0 (0000C744, 000038BC) 7.092 MB
P19: aboot (00010000, 00002000) 4 MB
P20: cmnlib (00012000, 00000800) 1024 KB
P21: cmnlib64 (00012800, 00000800) 1024 KB
P22: keymaster (00013000, 00000800) 1024 KB
P23: pad1 (00013800, 00005400) 10.5 MB
P24: fsg (00018C00, 00002000) 4 MB
P25: DDR (0001AC00, 00000040) 32 KB
P26: sec (0001AC40, 00000020) 16 KB
P27: devinfo (0001AC60, 00000800) 1024 KB
P28: limits (0001B460, 00000040) 32 KB
P29: pad2 (0001B4A0, 00004B60) 9.422 MB
P30: oeminfo (00020000, 00020000) 64 MB
P31: misc (00040000, 00002000) 4 MB
P32: modemst1 (00042000, 00002000) 4 MB
P33: modemst2 (00044000, 00002000) 4 MB
P34: rrecord (00046000, 00004000) 8 MB
P35: nff (0004A000, 00004000) 8 MB
P36: mcfg (0004E000, 00002000) 4 MB
P37: modem (00050000, 00030000) 96 MB
P38: erecovery_kernel (00080000, 0001C000) 56 MB
P39: erecovery_ramdisk (0009C000, 00010000) 32 MB
P40: erecovery_vendor (000AC000, 00008000) 16 MB
P41: kernel (000B4000, 0001C000) 56 MB
P42: ramdisk (000D0000, 00008000) 16 MB
P43: recovery_ramdisk (000D8000, 00010000) 32 MB
P44: recovery_vendor (000E8000, 00008000) 16 MB
P45: cache (000F0000, 00040000) 128 MB
P46: odm (00130000, 00010000) 32 MB
P47: persist (00140000, 00010000) 32 MB
P48: log (00150000, 00020000) 64 MB
P49: patch (00170000, 00010000) 32 MB
P50: version (00180000, 00010000) 32 MB
P51: vendor (00190000, 00130000) 608 MB
P52: product (002C0000, 00060000) 192 MB
P53: cust (00320000, 00060000) 192 MB
P54: system (00380000, 00520000) 2624 MB
P55: userdata (008A0000, 0319DFDF) 24.81 GB
Save to file...
Reading partition GPT... Done.
Reading partition sbl1... Done.
Reading partition rpm... Done.
Reading partition tz... Done.
Reading partition devcfg... Done.
Reading partition dsp... Done.
Reading partition keystore... Done.
Reading partition frp... Done.
Reading partition mota... Done.
Reading partition dip... Done.
Reading partition syscfg... Done.
Reading partition lksecapp... Done.
Reading partition apdp... Done.
Reading partition msadp... Done.
Reading partition dpo... Done.
Reading partition fsc... Done.
Reading partition ssd... Done.
Reading partition bootfail_info... Done.
Reading partition pad0... Done.
Reading partition aboot...
ERROR[011]: Read error.
At sector 65536
Disconnected.
  Reply With Quote
Old 04-18-2019, 13:03   #7 (permalink)
No Life Poster
 
starkrimes's Avatar
 
Join Date: Dec 2009
Location: Laghouat, Algeria
Age: 30
Posts: 541
Member: 1191316
Status: Offline
Thanks Meter: 900
Donate money to this user
you need to read a full dump .bin
  Reply With Quote
The Following User Says Thank You to starkrimes For This Useful Post:
Old 04-18-2019, 15:04   #8 (permalink)
No Life Poster
 
Pastime_GSM's Avatar
 
Join Date: Aug 2012
Location: under pross
Posts: 2,469
Member: 1798174
Status: Offline
Sonork: 100.114149
Thanks Meter: 1,048
Quote:
Originally Posted by starkrimes View Post
you need to read a full dump .bin
i get read full dump.bin with file size about 30 gb CoreID_0004F0E1_18_04_2019_13_14_14.bin
but when try to write in the demage phone get this error




Opening C:/Program Files/Octoplus Pro JTAG Software/CoreID_0004F0E1_18_04_2019_13_14_14.bin file...
Write data verification is enabled.
Writing. Please wait...
Read verification error 1. Possible reasons: damaged or write protected eMMC.
Disconnected.
Attached Images
File Type: jpg y7.jpg (179.3 KB, 326 views)
  Reply With Quote
Old 04-18-2019, 19:59   #9 (permalink)
No Life Poster
 
Pastime_GSM's Avatar
 
Join Date: Aug 2012
Location: under pross
Posts: 2,469
Member: 1798174
Status: Offline
Sonork: 100.114149
Thanks Meter: 1,048
flash with dump.bin done but phone still dead
Opening C:/Program Files/Octoplus Pro JTAG Software/CoreID_0004F0E1_18_04_2019_13_14_14.bin file... Write data verification is disabled.
Writing. Please wait... Done.
SW: 1.7.6; FW: 1.24
Attached Images
File Type: jpg Sans titre.jpg (183.5 KB, 138 views)
  Reply With Quote
Old 04-19-2019, 08:33   #10 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,848
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,413
Please, perform Write operation (with Skip Verification option), after perform Connect operation and post here full Software log.
Last edited by Octopus box; 04-19-2019 at 09:01.
  Reply With Quote
Old 04-19-2019, 11:57   #11 (permalink)
No Life Poster
 
Pastime_GSM's Avatar
 
Join Date: Aug 2012
Location: under pross
Posts: 2,469
Member: 1798174
Status: Offline
Sonork: 100.114149
Thanks Meter: 1,048
Quote:
Originally Posted by Octopus box View Post
Please, perform Write operation (with Skip Verification option), after perform Connect operation and post here full Software log.
this log with skip verification option


Opening C:/Program Files/Octoplus Pro JTAG Software/CoreID_0004F0E1_18_04_2019_13_14_14.bin file...
Write data verification is enabled.
Writing. Please wait...
Read verification error 1. Possible reasons: damaged or write protected eMMC.
Disconnected.
  Reply With Quote
Old 04-20-2019, 08:49   #12 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,848
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,413
after that disconnet device, connect it again and perform Connect operation and post here full Software log.
  Reply With Quote
Old 06-23-2019, 11:17   #13 (permalink)
Junior Member
 
Join Date: May 2019
Location: Ukraine
Posts: 6
Member: 2911121
Status: Offline
Thanks Meter: 1
Hello. Needed full dump huawei Y7 2018 LDN-L21. Dead boot.
  Reply With Quote
Old 07-25-2019, 09:17   #14 (permalink)
Junior Member
 
Join Date: Feb 2018
Location: GERMANY
Posts: 13
Member: 2810208
Status: Offline
Thanks Meter: 0
Donate money to this user
Huawei y7 2017 ldn-l21
Hello i Need dump file for huawei y7 prime 2018 dead boot
  Reply With Quote
Old 04-22-2020, 15:56   #15 (permalink)
Junior Member
 
Join Date: Apr 2020
Location: algeria
Posts: 22
Member: 2953860
Status: Offline
Thanks Meter: 3
i need board software of huawei y7 2017
  Reply With Quote
Reply
Page 1 of 2 1 2

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 22:45.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.23006 seconds with 9 queries

SEO by vBSEO