im working for new device for make constructor. - GSM-Forum

gencom · 12-20-2017, 12:12

normal circuit voltage vccq 1.8v and vcc 2.8v
but not connecting this voltage medusa pro.

when vccq voltage over 2.8v (3v 3.2v and 3.3v) connection etablish. but not stable. getting very read errors and disconnecting.

partition table cant read live mode.
but dumped rom file can readable partition manager.

Code:

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 3.0V
Bus Mode  : 1 bit
Bus speed : 15 MHz

Connecting...
Device       : Toshiba eMMC 016G92
Page size    : 512 B
Block size   : 512 B
Block count  : 30777344
Size         : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 11010030313647393201CC938F07C0E9
Manufacturer ID       : 0X11
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : 016G92
Product revision      : 0.1
Product serial number : (hex) CC938F07
Manufacturing date    : 12/2013
---------------------------------------------------------------
CSD Info

CSD                   : D00E00320F5903FFFFFFFFEF92400045
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size      : 4096 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 512 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1 (Bus width = 4Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x01) 00000001
Boot bus width        : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/016G92_20_12_2017_14_02_22.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.0; FW: 1.22.
Opening C:/Users/Akira/Desktop/Toshiba eMMC 016G92_20_12_2017_13_29_50.bin file...
Reading. Please wait... 
ERROR[011]: Read error.
At sector 1675008
Attempting to read...

ERROR[011]: Read error.
At sector 1741921
Attempting to read...

ERROR[011]: Read error.
At sector 1776385
Attempting to read...

ERROR[011]: Read error.
At sector 1829868
Attempting to read...

ERROR[011]: Read error.
At sector 1843290
Attempting to read...

ERROR[011]: Read error.
At sector 1843505
Attempting to read...

ERROR[011]: Read error.
At sector 1844616
Attempting to read...
Disconnected.

gencom · 12-20-2017, 12:34

Code:

SW: 1.5.0; FW: 1.22.

Switch error!!!
Opening C:/Users/Akira/Desktop/boot1.bin file...
Reading. Please wait... 
ERROR[011]: Read error.
At sector 0
Attempting to read...
Done.
Elapsed time 00:00:03 
SW: 1.5.0; FW: 1.22.

Switch error!!!
Opening C:/Users/Akira/Desktop/boot2.bin file...
Reading. Please wait... 
ERROR[011]: Read error.
At sector 0
Attempting to read...
Done.
Elapsed time 00:00:03 
SW: 1.5.0; FW: 1.22.

Switch error!!!
Opening C:/Users/Akira/Desktop/Toshiba eMMC 016G92_20_12_2017_13_29_50.bin file...
Reading. Please wait... 
ERROR[011]: Read error.
At sector 1844616 <==contuning read file
Attempting to read...
Disconnected.

gencom · 12-20-2017, 16:03

I will be bound! this true connection but. nominal working woltages but. now i m swapped . vcc swapped with vccq. now working connection very stable and reading live partitions. and dumped 16gb data without error 15mhz.

Code:

Opening C:/Users/Akira/Desktop/Toshiba eMMC 016G92_20_12_2017_13_29_50.bin file...
Reading. Please wait... 
Done.
Elapsed time 03:11:08 
SW: 1.5.0; FW: 1.22.

pls help for constructor. how to smaller?

Code:

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 3.3V
Bus Mode  : 1 bit
Bus speed : 15 MHz

Connecting...
Device       : Toshiba eMMC 016G92
Page size    : 512 B
Block size   : 512 B
Block count  : 30777344
Size         : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 11010030313647393201CC938F07C0E9
Manufacturer ID       : 0X11
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : 016G92
Product revision      : 0.1
Product serial number : (hex) CC938F07
Manufacturing date    : 12/2013
---------------------------------------------------------------
CSD Info

CSD                   : D00E00320F5903FFFFFFFFEF92400045
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size      : 4096 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 512 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1 (Bus width = 4Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x01) 00000001
Boot bus width        : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/016G92_20_12_2017_18_02_20.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.0; FW: 1.22.
P00: EXT2FS           (00005000, 00000800)	1024 KB
P01: EXT2FS           (00005800, 00000800)	1024 KB
P02: EXT2FS           (00006000, 0000A000)	20 MB
P03: EXT2FS           (00010040, 00004FC0)	9.969 MB
P04: EXT2FS           (00015040, 00004FC0)	9.969 MB
P05: EXT2FS           (0001A040, 000027C0)	4.969 MB
P06: EXT2FS           (0001C840, 000DE7C0)	445 MB
P07: EXT2FS           (000FB040, 0015DFC0)	700 MB
P08: EXT2FS           (00259040, 01AEBFC0)	13.46 GB

Medusa Box · 12-20-2017, 16:08

Hello.

What do You want to do exactly? What do You mean exactly under "how to smaller"? Do You want to create own SFR or what? If yes, from what device?

gencom · 12-21-2017, 08:54

Quote:

Originally Posted by Medusa Box

Hello.

What do You want to do exactly? What do You mean exactly under "how to smaller"? Do You want to create own SFR or what? If yes, from what device?

general mobile
etab-4
16gb

student tablet free from turkey 1.4 billion device. some devices need unlock.
unlock bypass period very hard. device activation protected by mdm.apk

usb disabled. only wifi and updates working. if not actived. if need bypass ;

1.battery must bee low(under %14).
2. need factory reset
3. must be click battery usage button in battery low popup first run.

when clicked battery usage button. then bypassed the activation screen. adb openable rootable and mdm.apk removable.

i want full activated dump

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-20-2017, 16:08	#4 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,397	Hello. What do You want to do exactly? What do You mean exactly under "how to smaller"? Do You want to create own SFR or what? If yes, from what device?