Lg ls777 zv9 unlocked done with our geant octoplus

[starkrimes]

LG LS777 ZV9 UNLOCKED DONE WITH OUR GEANT OCTOPLUS


LOG :

 Welcome to Octoplus Pro JTAG Software version 1.7.6. 

 Started.
 Reader #0: FT SCR2000 0
 Reader #1: FT SCR2000 1
 Reader #2: FT SCR2000 2
 Reader #3: Generic Usb Smart Card Reader 0
 Reader #4: Generic Usb Smart Card Reader 1
 Reader #5: Generic Usb Smart Card Reader 2
 
 Please disconnect battery and USB cable.
 
 Model Settings:
 Interface : eMMC
 Brand     : LG
 Model     : LS777
 SRF       : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_LS777_EMMC.srf
 Voltage   : 2.8V
 Bus Mode  : 1 bit
 Bus speed : Auto
 
 Connecting...
 Device       : Samsung eMMC QE13MB
 Page size    : 512 B
 Block size   : 512 B
 Block count  : 30535680
 Size         : 14.56 GB (14910.00 MB)
 ---------------------------------------------------------------
 CID Info
 
 CID                   : 150100514531334D420DB711681364EF
 Manufacturer ID       : 0X15
 Device/BGA            : BGA (Discrete embedded)
 OEM/Application ID    : 0X00
 Product name          : QE13MB
 Product revision      : 0.13
 Product serial number : (hex) B7116813
 Manufacturing date    : 06/2017
 ---------------------------------------------------------------
 CSD Info
 
 CSD                   : D02701320F5903FFF6DBFFEF8E40400D
 CSD structure         : CSD version No. 1.2
 SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                         4.51, 5.0, 5.01, 5.1
 Data read access time1: 15 ms
 TRAN speed            : 26 MHz
 READ block length     : 512 Bytes
 WP group enable       : YES
 PERM_WRITE_PROTECT    : NO
 TMP_WRITE_PROTECT     : NO
 ---------------------------------------------------------------
 EXTCSD Info
 
 Revision 1.8 (for MMC v5.1)
 Erase block size      : 512 Kbytes
 Boot1 size            : 4096 Kbytes
 Boot2 size            : 4096 Kbytes
 RPMB size             : 4096 Kbytes
 
 Partition config      : (0x00) 00000000
 Boot partition enable : Device not boot enabled (default)
 (Bus width = 1Bit)
 Boot ACK              : No boot acknowledge sent (default)
 
 Boot bus conditions   : (0x00) 00000000
 Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
 Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
 Boot mode             : Use single data rate + backward compatible timings in boot operation (default)
 
 RST_n function        : (0x01) RST_n signal is permanently enabled
 
 Partitioning support  : Device supports partitioning features
 Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
 Max enhanced data size: 7626752 Kbytes
 Partitions attribute  : 0x0
 Part setting completed: 0x0
 GP partition 1 size   : 0 b
 GP partition 2 size   : 0 b
 GP partition 3 size   : 0 b
 GP partition 4 size   : 0 b
 Enhanced area size    : (0x0) 0 b
 Enhanced area start   : (0x0) 0 b
 
 ---------------------------------------------------------------Searching Android build info...
 Ok
 
 Disk/Image size       : a3e00000 bytes
 Device sector size    : 512 bytes
 Partition offset      : 1032192
 Number of sectors     : 7602176
 Device Manufacturer   :lge
 Device Platform       :msm8937
 Build ID              :NRD90U
 Display Build ID      :NRD90U
 Release ID            :7.0
 Device Model          :LG-LS777
 Device Name           :sf340_spr_us
 Architecture ABI      :armeabi-v7a
 Architecture ABI2     :armeabi
 Architecture ABI List :armeabi-v7a,armeabi
 Build Description     :sf340_spr_us-user 7.0 NRD90U 17328121524cf release-keys
 
 Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE13MB_26_03_2019_10_08_11.bin.
 Connect successful.
 ---------------------------------------------------------------
 SW: 1.7.6; FW: 1.24.
 P00: GPT              (00000000, 00004000)    8 MB
 P01: modem            (00004000, 0002C000)    88 MB
 P02: aboot            (00030000, 00001000)    2048 KB
 P03: abootbak         (00031000, 00001000)    2048 KB
 P04: tz               (00032000, 00001000)    2048 KB
 P05: tzbak            (00033000, 00001000)    2048 KB
 P06: sbl1             (00034000, 00000800)    1024 KB
 P07: sbl1bak          (00034800, 00000800)    1024 KB
 P08: rpm              (00035000, 00000400)    512 KB
 P09: rpmbak           (00035400, 00000400)    512 KB
 P10: devcfg           (00035800, 00000400)    512 KB
 P11: devcfgbak        (00035C00, 00000400)    512 KB
 P12: cmnlib           (00036000, 00000400)    512 KB
 P13: cmnlibbak        (00036400, 00000400)    512 KB
 P14: cmnlib64         (00036800, 00000400)    512 KB
 P15: cmnlib64bak      (00036C00, 00000400)    512 KB
 P16: keymaster        (00037000, 00000400)    512 KB
 P17: keymasterbak     (00037400, 00000400)    512 KB
 P18: spare1           (00037800, 00000400)    512 KB
 P19: spare2           (00037C00, 00000400)    512 KB
 P20: persistent       (00038000, 00000400)    512 KB
 P21: devinfo          (00038400, 00000800)    1024 KB
 P22: spare3           (00038C00, 00003400)    6.5 MB
 P23: modemst1         (0003C000, 00000C00)    1536 KB
 P24: modemst2         (0003CC00, 00000C00)    1536 KB
 P25: mcfg             (0003D800, 00002000)    4 MB
 P26: fsc              (0003F800, 00000400)    512 KB
 P27: ssd              (0003FC00, 00000400)    512 KB
 P28: fsg              (00040000, 00000C00)    1536 KB
 P29: spare4           (00040C00, 00003400)    6.5 MB
 P30: dsp              (00044000, 00008000)    16 MB
 P31: ftm              (0004C000, 00004000)    8 MB
 P32: misc             (00050000, 00004000)    8 MB
 P33: drm              (00054000, 00004000)    8 MB
 P34: sns              (00058000, 00004000)    8 MB
 P35: fota             (0005C000, 00005000)    10 MB
 P36: sec              (00061000, 00000400)    512 KB
 P37: keystore         (00061400, 00000400)    512 KB
 P38: rct              (00061800, 00000400)    512 KB
 P39: encrypt          (00061C00, 00000400)    512 KB
 P40: eksst            (00062000, 00000400)    512 KB
 P41: apdp             (00062400, 00000400)    512 KB
 P42: msadp            (00062800, 00000400)    512 KB
 P43: dpo              (00062C00, 00000400)    512 KB
 P44: DDR              (00063000, 00000400)    512 KB
 P45: spare5           (00063400, 00000C00)    1536 KB
 P46: boot             (00064000, 00010000)    32 MB
 P47: laf              (00074000, 00010000)    32 MB
 P48: lafbak           (00084000, 00010000)    32 MB
 P49: recovery         (00094000, 00010000)    32 MB
 P50: recoverybak      (000A4000, 00010000)    32 MB
 P51: factory          (000B4000, 0001C000)    56 MB
 P52: raw_resources    (000D0000, 00002000)    4 MB
 P53: raw_resourcesbak (000D2000, 00002000)    4 MB
 P54: persist          (000D4000, 00010000)    32 MB
 P55: mpt              (000E4000, 00004000)    8 MB
 P56: carrier          (000E8000, 00014000)    40 MB
 P57: system           (000FC000, 00740000)    3712 MB
 P58: cache            (0083C000, 00268000)    1232 MB
 P59: userdata         (00AA4000, 0127AFDE)    9.24 GB
 P60: grow             (01D1EFDE, 00000001)    512 b
Opening E:/FLASH TELEPHONE/LG/LS/LS777/unlocked sim firmware/Samsung eMMC/LS777_ZV8.tot file...
Signature OK.
Signature 2 OK.
Open file "E:/FLASH TELEPHONE/LG/LS/LS777/unlocked sim firmware/Samsung eMMC/LS777_ZV8.tot file".
Write data verification is enabled.
Writing. Please wait...
Writing partition modem...    Done.
Writing partition carrier...    Done.
Writing is finished.
SW: 1.7.6; FW: 1.24.
 Reconnect the device to see changes

Download Octoplus PRO JTAG Software v.1.7.6

Find out more at: www.octoplusbox.com

[Annier84]

I have one that in the procedure is dead no longer turns on

[starkrimes]

Originally Posted by annier84

i have one that in the procedure is dead no longer turns on

please post full log here