GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus JTAG

Reply
 
LinkBack Thread Tools Display Modes
Old 04-17-2019, 20:21   #1 (permalink)
Freak Poster
 
Join Date: Feb 2008
Location: algeria
Age: 36
Posts: 145
Member: 709257
Status: Offline
Thanks Meter: 72
ls777 what wrong here [Answered]


i try to unlock this phone like all times by writing modem and cariere file
but when i connect the phone the box read the phone but give partition tablet not found
phone work well
.................................log.............. ...............

Welcome to Medusa Pro Software version 1.7.6.
Started.
Reader #0: Generic EMV Smartcard Reader 0
Reader #1: Generic EMV Smartcard Reader 1

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : LG
Model : LS777
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_LS777_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...

ERROR[001]: Can not connect. No target device present.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : LG
Model : LS777
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_LS777_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Samsung eMMC QE13MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info

CID : 150100514531334D420DE5769AC5148D
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE13MB
Product revision : 0.13
Product serial number : (hex) E5769AC5
Manufacturing date : 01/2001
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.0
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.0 (for MMC v4.0)
Erase block size : 67072 Kbytes
Boot1 size : 16384 Kbytes
Boot2 size : 16384 Kbytes
RPMB size : 384 Kbytes

Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x80000000) 2048 MB

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/QE13MB_17_04_2019_18_47_50.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
Partition table was not found.
Partition table was not found.
Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : LG
Model : LS777
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_LS777_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...

ERROR[001]: Can not connect. No target device present.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : LG
Model : LS777
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_LS777_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...

ERROR[001]: Can not connect. No target device present.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : LG
Model : LS777
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_LS777_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...

ERROR[001]: Can not connect. No target device present.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : LG
Model : LS777
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_LS777_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Samsung eMMC QE13MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info

CID : 150100514531334D420DE5769AC5148D
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE13MB
Product revision : 0.13
Product serial number : (hex) E5769AC5
Manufacturing date : 01/2001
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.0
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.0 (for MMC v4.0)
Erase block size : 67072 Kbytes
Boot1 size : 16384 Kbytes
Boot2 size : 16384 Kbytes
RPMB size : 384 Kbytes

Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x80000000) 2048 MB

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/QE13MB_17_04_2019_18_49_18.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
Partition table was not found.
  Reply With Quote
Old 04-18-2019, 13:02   #2 (permalink)
Insane Poster
 
Join Date: Dec 2009
Location: algiers, Algeria
Posts: 92
Member: 1191316
Status: Offline
Thanks Meter: 121
Donate money to this user
try to change voltage from 1.8v to 2.8v and post the new log
  Reply With Quote
Old 04-18-2019, 21:18   #3 (permalink)
Freak Poster
 
Join Date: Feb 2008
Location: algeria
Age: 36
Posts: 145
Member: 709257
Status: Offline
Thanks Meter: 72
Welcome to Octoplus Pro JTAG Software version 1.7.6.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Reader #2: Generic EMV Smartcard Reader 0

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : LG
Model : LS777
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_LS777_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Samsung eMMC QE13MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info

CID : 150100514531334D420DE5769AC5148D
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE13MB
Product revision : 0.13
Product serial number : (hex) E5769AC5
Manufacturing date : 01/2001
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.0
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.0 (for MMC v4.0)
Erase block size : 67072 Kbytes
Boot1 size : 16384 Kbytes
Boot2 size : 16384 Kbytes
RPMB size : 384 Kbytes

Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x80000000) 2048 MB

Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/QE13MB_18_04_2019_21_16_06.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
Partition table was not found.
  Reply With Quote
Old Yesterday, 08:31   #4 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Posts: 85,059
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 23,476
Quote:
Size : 1024.00 MB
AS You can see from the Software log, your device detects not correctly. As @starkrimes said You berfore, try to set another Speed, Voltage, make sure that device connected to PC directly (don't use USB HUBS), it's important.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 08:03.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.23977 seconds with 7 queries

SEO by vBSEO