need urgent help for huawei g7-l11 dead boot...

[abo anas zayan]

i can detect as qualcom 9008,i have working phone but i dont know which qloader should i use 1-2-3

Welcome to Octoplus Pro JTAG Software version 1.3.4. Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic EMV Smartcard Reader 4
Reader #3: Generic EMV Smartcard Reader 5
Reader #4: Hewlett-Packard Company CCID Interface 3


Model Settings:
Interface : USB
Core : Qualcomm MSM8916
Loader : QLoader_v2


Connecting...
Sending loader...OK.
Loader successfully initialized.


Device : CoreID_007050E1
Core : Qualcomm MSM8916
Page size : 512 B
Block size : 512 B
Block count : 30785536
Size : 14.68 GB
Connect successful.
---------------------------------------------------------------
SW: 1.3.4; FW: 1.1.0.
P00: GPT (00000000, 00000022)
P01: sbl1 (00000022, 00000400)
P02: hyp (00000422, 00000400)
P03: sec (00002000, 00000040)
P04: DDR (00002040, 00000040)
P05: rpm (00004000, 00000400)
P06: tz (00004400, 00000400)
P07: aboot (00004800, 00002780)
P08: pad (00006F80, 00000800)
P09: oeminfo (00007780, 00020000)
P10: modemst1 (00027780, 00002000)
P11: modemst2 (00029780, 00002000)
P12: modem (0002C000, 00030000)
P13: fsg (0005C000, 00002000)
P14: fsc (0005E000, 00001000)
P15: ssd (0005F000, 00001000)
P16: log (00060000, 00020000)
P17: persist (00080000, 00010000)
P18: boot (00090000, 0000A000)
P19: recovery (0009A000, 0000C000)
P20: cust (000A6000, 00180000)
P21: cache (00226000, 00080000)
P22: misc (002A6000, 00002000)
P23: system (002A8000, 00380000)
P24: userdata (00628000, 01733FDF)
i have dumped as mpt but need help because i flashed to dead phone same problem dead detect as qualcom9008...

[Medusa Box]

Hello.

i have working phone but i dont know which qloader should i use 1-2-3

You can use any of them, that can connects the device.

i have dumped as mpt but need help because i flashed to dead phone same problem dead detect as qualcom9008...

The problem can be with version of boot loaders - boot loaders from working device could be not compatible with your "dead" device (have lower version, than should be). Also your device may have HW problems. Anyway, also try to do the next:

1. Read out Full flash from your working device.
2. Connect the "dead" device and make Erase Full flash (select "Full" option in Software and press "Erase" button).
3. Write the readed Full flash.

Post here the result (full Software log with all performed operations).