🐙 Octoplus JTAG PRO v.1.2.0 - check this out! 🐙 - GSM-Forum

Gsmserver · 09-15-2016, 16:21

Octoplus JTAG PRO Software v.1.2.0 is out!

We have added support for LG G5 SE, LG G Slylo, LG Transpyre and Samsung Galaxy Grand Prime!
Also, we have uploaded new SRF (Smart Repair File) for LG LS996, based on ZV7 firmware version.

Octoplus Box JTAG PRO Software v.1.2.0 Release Notes:

🐙 Added support for the following models via eMMC:
LG H845 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

LG LS770 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

LG VS810PP - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

Samsung SM-G530H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

🐙 Uploaded new SRF for LG LS996 «LG_LS996_EMMC_BGND3R_ZV7_5.1.1.SRF»
🐙 Updated pinouts in old SRF for LG LS996 - please uninstall old SRF («Uninstall custom model file(s)» button at «Welcome» tab in the software) and download new «G_LS996_EMMC_BGND3R_ZV4.SRF» («Download *.srf» button)
🐙 All pinouts and repair procedures described in the manual ("Help" button in the software)

Please pay attention! As you may have noticed, there is a minor issue with early Medusa PRO boxes firmware update. For those who have troubles with updating their box firmware version to 1.11 we introduce the so called "compatibility mode" - possibility to use all the latest software versions with old box firmware, but sacrificing some firmware-based improvements.

When you run software 1.2.0 for the first time it will attempt to update your box firmware to 1.11 if needed. If it fails to do so you will see "box status: not found" message.

To switch the software to "compatibility mode" do the following:
1. Close Medusa PRO software
2. Reconnect the box
3. Launch 1.2.0 software again

Also, keep in mind that non-updatable boxes are covered with warranty and entitled for replacement by authorized resellers.

Download Octoplus JTAG PRO Software v.1.2.0

Find out more at: www.octoplusbox.com

nessyb · 09-15-2016, 21:02

sacrificing some firmware-based improvements.... Like what?!!! Which features... Please clarify

ahmer5050 · 09-16-2016, 05:11

Good Work Team,,,,,,,,,

Medusa Box · 09-16-2016, 07:10

Quote:

Originally Posted by nessyb

sacrificing some firmware-based improvements.... Like what?!!! Which features... Please clarify

Like higher speed and, maybe, the new features and improvements, which will be released with new firmware updates.

lpservice · 09-20-2016, 22:14

Great nice update.Thanks Octoplus JTac Pro box Team...........

fernanvergara · 09-23-2016, 15:56

great update of team, but, when the shell recognize to module JTAG Pro?

thanks

Octopus box · 09-23-2016, 15:58

Thanks. We will try to update Shell Software in one of the future Software updates.

09-15-2016, 16:21	#1 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,144 Member: 21077 Status: Online Thanks Meter: 116,336	🐙 Octoplus JTAG PRO v.1.2.0 - check this out! 🐙 Octoplus JTAG PRO Software v.1.2.0 is out! We have added support for LG G5 SE, LG G Slylo, LG Transpyre and Samsung Galaxy Grand Prime! Also, we have uploaded new SRF (Smart Repair File) for LG LS996, based on ZV7 firmware version. Octoplus Box JTAG PRO Software v.1.2.0 Release Notes: 🐙 Added support for the following models via eMMC: LG H845 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG LS770 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG VS810PP - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G530H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files 🐙 Uploaded new SRF for LG LS996 «LG_LS996_EMMC_BGND3R_ZV7_5.1.1.SRF» 🐙 Updated pinouts in old SRF for LG LS996 - please uninstall old SRF («Uninstall custom model file(s)» button at «Welcome» tab in the software) and download new «G_LS996_EMMC_BGND3R_ZV4.SRF» («Download .srf» button) 🐙 All pinouts and repair procedures described in the manual ("Help" button in the software)* Please pay attention! As you may have noticed, there is a minor issue with early Medusa PRO boxes firmware update. For those who have troubles with updating their box firmware version to 1.11 we introduce the so called "compatibility mode" - possibility to use all the latest software versions with old box firmware, but sacrificing some firmware-based improvements. When you run software 1.2.0 for the first time it will attempt to update your box firmware to 1.11 if needed. If it fails to do so you will see "box status: not found" message. To switch the software to "compatibility mode" do the following: 1. Close Medusa PRO software 2. Reconnect the box 3. Launch 1.2.0 software again Also, keep in mind that non-updatable boxes are covered with warranty and entitled for replacement by authorized resellers. Download Octoplus JTAG PRO Software v.1.2.0 Find out more at: www.octoplusbox.com Last edited by Gsmserver; 09-15-2016 at 16:26.

09-15-2016, 21:02	#2 (permalink)
nessyb No Life Poster Join Date: Jan 2013 Location: zimbabwe south africa Posts: 1,441 Member: 1866877 Status: Offline Sonork: 100.1681933 Thanks Meter: 707	sacrificing some firmware-based improvements.... Like what?!!! Which features... Please clarify

09-16-2016, 05:11	#3 (permalink)
ahmer5050 No Life Poster Join Date: Apr 2015 Location: LOOLCANO Taba Day. Posts: 1,882 Member: 2385819 Status: Offline Sonork: No More Used Thanks Meter: 827	Good Work Team,,,,,,,,,

09-20-2016, 22:14	#5 (permalink)
lpservice Freak Poster Join Date: Dec 2010 Posts: 303 Member: 1461041 Status: Offline Thanks Meter: 57	Great nice update.Thanks Octoplus JTac Pro box Team...........

09-23-2016, 15:56	#6 (permalink)
fernanvergara Junior Member Join Date: Oct 2011 Location: medellin, colombia Posts: 30 Member: 1673356 Status: Offline Thanks Meter: 2	great update of team, but, when the shell recognize to module JTAG Pro? thanks

09-23-2016, 15:58	#7 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,824 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,409	Thanks. We will try to update Shell Software in one of the future Software updates.