Vodafone VF-1397 dead after remove FRP [Solved] - GSM-Forum

Lux_hmobile · 11-20-2017, 20:17

Welcome to Octoplus Pro JTAG Software version 1.4.0.
Started.
Reader #0: FT SCR2000 0
Reader #1: Generic EMV Smartcard Reader 0

Model Settings:
Interface : USB
Core : Qualcomm MSM8909
Loader : QLoader_v1

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_009600E1
Core : Qualcomm MSM8909
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB
Connect successful.
---------------------------------------------------------------
SW: 1.4.0; FW: 1.1.0.
P00: GPT (00000000, 00020000)
P01: modem (00020000, 00020000)
P02: tunning (00040000, 00000C00)
P03: traceability (00040C00, 00000800)
P04: fsc (00041400, 00000002)
P05: ssd (00041402, 00000010)
P06: sbl1 (00041412, 00000400)
P07: sbl1bak (00041812, 00000400)
P08: rpm (00041C12, 00000400)
P09: rpmbak (00042012, 00000400)
P10: tz (00042412, 00000400)
P11: tzbak (00042812, 00000400)
P12: pad (00042C12, 00000800)
P13: hyp (00043412, 00000400)
P14: hypbak (00043812, 00000400)
P15: modemst1 (00043C12, 00000C00)
P16: modemst2 (00044812, 00000C00)
P17: simlock (00045412, 00000800)
P18: efsdata (00045C12, 00000C00)
P19: DDR (00060000, 00000040)
P20: fsg (00060040, 00000C00)
P21: sec (00060C40, 00000020)
P22: aboot (00060C60, 00000800)
P23: abootbak (00061460, 00000800)
P24: boot (00061C60, 00010000)
P25: recovery (00071C60, 00010000)
P26: system (00081C60, 00400000)
P27: persist (004A0000, 00010000)
P28: reserved (004B0000, 0000A000)
P29: splash (004BA000, 00004000)
P30: tctpersist (004BE000, 0000A000)
P31: hdcp (004C8000, 00005000)
P32: fota (004CD000, 00000010)
P33: cache (004CD010, 00080000)
P34: misc (0054D010, 00000800)
P35: persistent (0054D810, 00001000)
P36: devinfo (00560000, 00000800)
P37: keystore (00580000, 00000400)
P38: config (00580400, 00000040)
P39: oem (00580440, 00000080)
P40: userdata (005804C0, 0179EB1F)
Removing FRP. Please wait... Done.
SW: 1.4.0; FW: 1.1.0.
Disconnected.

Octopus box · 11-21-2017, 06:54

Hello.

You should find and write original firmware for this device from "Qualcomm...9008" Mode. Connect the device in "Qualcomm...9008" Mode then go to "Factory Repair" tab of Software, select original firmware with "*.xml" and write it into your device. If You can't find proper firmware, You can read out full flash from the same working device model and write this full flash into your "dead" device.

Also, please always use the latest Software version (https://octoplusbox.com/en/download/software/).

Lux_hmobile · 11-26-2017, 23:26

Hi
The device is repaired!
Thank you for your answer!

SandyBridge · 02-02-2018, 18:55

Quote:

Originally Posted by Lux_hmobile

Hi
The device is repaired!
Thank you for your answer!

I have a same model stuck on loading logo after unlock.
Could you please dump or upload firmare file. Id be thankfull for your help.

11-20-2017, 20:17	#1 (permalink)
Lux_hmobile Freak Poster Join Date: Nov 2011 Posts: 268 Member: 1698387 Status: Offline Thanks Meter: 43	Vodafone VF-1397 dead after remove FRP [Solved] Welcome to Octoplus Pro JTAG Software version 1.4.0. Started. Reader #0: FT SCR2000 0 Reader #1: Generic EMV Smartcard Reader 0 Model Settings: Interface : USB Core : Qualcomm MSM8909 Loader : QLoader_v1 Connecting... Sending loader...OK. Loader successfully initialized. Device : CoreID_009600E1 Core : Qualcomm MSM8909 Page size : 512 B Block size : 512 B Block count : 30535680 Size : 14.56 GB Connect successful. --------------------------------------------------------------- SW: 1.4.0; FW: 1.1.0. P00: GPT (00000000, 00020000) P01: modem (00020000, 00020000) P02: tunning (00040000, 00000C00) P03: traceability (00040C00, 00000800) P04: fsc (00041400, 00000002) P05: ssd (00041402, 00000010) P06: sbl1 (00041412, 00000400) P07: sbl1bak (00041812, 00000400) P08: rpm (00041C12, 00000400) P09: rpmbak (00042012, 00000400) P10: tz (00042412, 00000400) P11: tzbak (00042812, 00000400) P12: pad (00042C12, 00000800) P13: hyp (00043412, 00000400) P14: hypbak (00043812, 00000400) P15: modemst1 (00043C12, 00000C00) P16: modemst2 (00044812, 00000C00) P17: simlock (00045412, 00000800) P18: efsdata (00045C12, 00000C00) P19: DDR (00060000, 00000040) P20: fsg (00060040, 00000C00) P21: sec (00060C40, 00000020) P22: aboot (00060C60, 00000800) P23: abootbak (00061460, 00000800) P24: boot (00061C60, 00010000) P25: recovery (00071C60, 00010000) P26: system (00081C60, 00400000) P27: persist (004A0000, 00010000) P28: reserved (004B0000, 0000A000) P29: splash (004BA000, 00004000) P30: tctpersist (004BE000, 0000A000) P31: hdcp (004C8000, 00005000) P32: fota (004CD000, 00000010) P33: cache (004CD010, 00080000) P34: misc (0054D010, 00000800) P35: persistent (0054D810, 00001000) P36: devinfo (00560000, 00000800) P37: keystore (00580000, 00000400) P38: config (00580400, 00000040) P39: oem (00580440, 00000080) P40: userdata (005804C0, 0179EB1F) Removing FRP. Please wait... Done. SW: 1.4.0; FW: 1.1.0. Disconnected. Last edited by Octopus box; 11-27-2017 at 06:05.

11-21-2017, 06:54	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Hello. You should find and write original firmware for this device from "Qualcomm...9008" Mode. Connect the device in "Qualcomm...9008" Mode then go to "Factory Repair" tab of Software, select original firmware with "*.xml" and write it into your device. If You can't find proper firmware, You can read out full flash from the same working device model and write this full flash into your "dead" device. Also, please always use the latest Software version (https://octoplusbox.com/en/download/software/).

11-26-2017, 23:26	#3 (permalink)
Lux_hmobile Freak Poster Join Date: Nov 2011 Posts: 268 Member: 1698387 Status: Offline Thanks Meter: 43	Hi The device is repaired! Thank you for your answer!