c300 - GSM-Forum

otto68 · 08-11-2012, 18:19

today i flashed one c300 with the flash file that always use and all flashed fine but when i tried to turn nothing. the phone was on when came into shop. I have backup of flash and eeprom. Can anyone tell how to get this unit working again. Here is lg

8/10/2012 3:58:37 PM > Platform: LG Infineon
8/10/2012 3:58:37 PM > Selected port: USB
8/10/2012 3:58:37 PM > Selected model: C300
8/10/2012 3:58:37 PM > Disconnect battery and connect USB cable to phone...
8/10/2012 3:58:40 PM > Phone found.
8/10/2012 3:58:40 PM > Sending preloader...8/10/2012 3:58:43 PM > OK
8/10/2012 3:58:44 PM > Sending loader...8/10/2012 3:58:44 PM > OK
8/10/2012 3:58:44 PM > Initializing flash...8/10/2012 3:58:44 PM > OK
8/10/2012 3:58:44 PM > Flash ID: 89B1
8/10/2012 3:58:44 PM > Flash type: Intel
8/10/2012 3:58:44 PM > Reading info. Please wait...
8/10/2012 3:58:46 PM > IMEI: 358348-04-566357-3
8/10/2012 3:58:54 PM > Opening "C300-358348045663573.FUL"...8/10/2012 3:58:54 PM > OK
8/10/2012 3:58:54 PM > Erasing...Please wait...8/10/2012 4:05:53 PM > OK
8/10/2012 4:05:53 PM > Writing Full flash...8/10/2012 4:11:25 PM > OK
8/10/2012 4:11:25 PM > Writing Full flash done!
8/10/2012 4:11:25 PM > Reading info. Please wait...
8/10/2012 4:11:27 PM > IMEI: 358348-04-566357-3
8/10/2012 4:11:40 PM > Opening "C300-358348045663573.EEP"...8/10/2012 4:11:40 PM > OK
8/10/2012 4:11:40 PM > Erasing...Please wait...8/10/2012 4:11:41 PM > OK
8/10/2012 4:11:41 PM > Writing EEPROM...8/10/2012 4:11:42 PM > OK
8/10/2012 4:11:42 PM > Writing EEPROM done!
8/10/2012 4:11:42 PM > Reading info. Please wait...
8/10/2012 4:12:40 PM > Disconnected.

otto68 · 08-11-2012, 20:19

[QUOTE=otto68;8664621]today i flashed one c300 with the flash file that always use and all flashed fine but when i tried to turn nothing. the phone was on when came into shop. I have backup of flash and eeprom. Can anyone tell how to get this unit working again. Here is lg

8/10/2012 3:58:37 PM > Platform: LG Infineon
8/10/2012 3:58:37 PM > Selected port: USB
8/10/2012 3:58:37 PM > Selected model: C300
8/10/2012 3:58:37 PM > Disconnect battery and connect USB cable to phone...
8/10/2012 3:58:40 PM > Phone found.
8/10/2012 3:58:40 PM > Sending preloader...8/10/2012 3:58:43 PM > OK
8/10/2012 3:58:44 PM > Sending loader...8/10/2012 3:58:44 PM > OK

8/10/2012 3:58:44 PM > Initializing flash...8/10/2012 3:58:44 PM > OK
8/10/2012 3:58:44 PM > Flash ID: 89B1
8/10/2012 3:58:44 PM > Flash type: Intel
8/10/2012 3:58:44 PM > Reading info. Please wait...
8/10/2012 3:58:46 PM > IMEI: 358348-04-566357-3
8/10/2012 3:58:54 PM > Opening "C300-358348045663573.FUL"...8/10/2012 3:58:54 PM > OK
8/10/2012 3:58:54 PM > Erasing...Please wait...8/10/2012 4:05:53 PM > OK
8/10/2012 4:05:53 PM > Writing Full flash...8/10/2012 4:11:25 PM > OK
8/10/2012 4:11:25 PM > Writing Full flash done!
8/10/2012 4:11:25 PM > Reading info. Please wait...
8/10/2012 4:11:27 PM > IMEI: 358348-04-566357-3
8/10/2012 4:11:40 PM > Opening "C300-358348045663573.EEP"...8/10/2012 4:11:40 PM > OK
8/10/2012 4:11:40 PM > Erasing...Please wait...8/10/2012 4:11:41 PM > OK
8/10/2012 4:11:41 PM > Writing EEPROM...8/10/2012 4:11:42 PM > OK
8/10/2012 4:11:42 PM > Writing EEPROM done!
8/10/2012 4:11:42 PM > Reading info. Please wait...
8/10/2012 4:12:40 PM > Disconnected.[/QUOi

I reflashed with other firmware and get blue screen but i recieve calls. Any ideas

otto68 · 08-13-2012, 15:25

Hello Any help on this problem. I need to give phone back to customer.

otto68 · 08-13-2012, 19:33

still no help, I made backups of flash file and eeprom but still cant get this to turn on fully. Only the keypad and the lcd turns on blue. The phone came to me fully on and working only problem was security code. I tried to flash and now phone in this way. It flashes complete but no lcd

otto68 · 08-17-2012, 22:37

Hello anyone out there, I need help with this C300. I even replaced lcd just in case it was damaged but no luck. There has to be a way to fix this problem. I can make calls, receive calls. Like I said phone came 100 percent working and after flash blackscreen and cant fix. Someone please help

Octopus box · 08-20-2012, 12:16

Hello.
What was the firmware version in your phone at the beginning? Please write EEPROM backup and then write the same firmware version that was in your phone before all of your actions.

otto68 · 08-20-2012, 13:14

honestly I dont remember which firmware it was but I did backed up all eeprom and read full flash, could I use that? Thanks for the response

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
C300 information	valmo	ODM (Original Design Manufacturing)	19	03-28-2003 00:33
How to connect Motorola C300 to PC?	Bogi	ODM (Original Design Manufacturing)	6	01-29-2003 21:31
Help me and my motorola c300	vcdsyok	P2k Series	0	12-15-2002 14:04
sale motorola flash files : c300 c330 t720 and t720i ( russian and others)	enemy	Main Sales Section	0	12-08-2002 15:35
sale motorola c300 and c330 russian flash and others	enemy	Main Sales Section	0	11-30-2002 10:57

08-13-2012, 15:25	#3 (permalink)
otto68 Product Supporter Join Date: Nov 2006 Location: Ecuador, Shenzhen, Guangzhou Age: 44 Posts: 613 Member: 394446 Status: Offline Sonork: 100.1579789 Thanks: 338 Thanked 63 Times in 45 Posts	Hello Any help on this problem. I need to give phone back to customer.

08-13-2012, 19:33	#4 (permalink)
otto68 Product Supporter Join Date: Nov 2006 Location: Ecuador, Shenzhen, Guangzhou Age: 44 Posts: 613 Member: 394446 Status: Offline Sonork: 100.1579789 Thanks: 338 Thanked 63 Times in 45 Posts	still no help, I made backups of flash file and eeprom but still cant get this to turn on fully. Only the keypad and the lcd turns on blue. The phone came to me fully on and working only problem was security code. I tried to flash and now phone in this way. It flashes complete but no lcd

08-17-2012, 22:37	#5 (permalink)
otto68 Product Supporter Join Date: Nov 2006 Location: Ecuador, Shenzhen, Guangzhou Age: 44 Posts: 613 Member: 394446 Status: Offline Sonork: 100.1579789 Thanks: 338 Thanked 63 Times in 45 Posts	Hello anyone out there, I need help with this C300. I even replaced lcd just in case it was damaged but no luck. There has to be a way to fix this problem. I can make calls, receive calls. Like I said phone came 100 percent working and after flash blackscreen and cant fix. Someone please help

08-20-2012, 12:16	#6 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Posts: 10,774 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks: 3,606 Thanked 4,889 Times in 2,566 Posts	Hello. What was the firmware version in your phone at the beginning? Please write EEPROM backup and then write the same firmware version that was in your phone before all of your actions.

08-20-2012, 13:14	#7 (permalink)
otto68 Product Supporter Join Date: Nov 2006 Location: Ecuador, Shenzhen, Guangzhou Age: 44 Posts: 613 Member: 394446 Status: Offline Sonork: 100.1579789 Thanks: 338 Thanked 63 Times in 45 Posts	honestly I dont remember which firmware it was but I did backed up all eeprom and read full flash, could I use that? Thanks for the response