d820 Need QCN writer [Solved] - GSM-Forum

hulksjeep · 04-02-2015, 03:59

Tried QPST method, phone isn't detected, and tried the FTM as said in discussed method and phone will not go into that mode, please advise.

Octopus box · 04-02-2015, 05:48

What the Android firmware version is in your device now exactly?

hulksjeep · 04-02-2015, 05:51

its running 4.4 kitkat

Octopus box · 04-02-2015, 06:17

Ok, install the lates Software version (Software), install neccessary drivers (http://octoplusbox.com/files/drivers...ile_Phones.exe, https://mega.co.nz/#!OlxHUKzC!j5qLEU..._sS4v0fK02kQUg), connect the phone, try to write QCN and post here full Software log.

hulksjeep · 04-02-2015, 06:32

Quote:

Originally Posted by Octopus box

Ok, install the lates Software version (Software), install neccessary drivers (http://octoplusbox.com/files/drivers...ile_Phones.exe, https://mega.co.nz/#!OlxHUKzC!j5qLEU..._sS4v0fK02kQUg), connect the phone, try to write QCN and post here full Software log.

I will try it tomorrow it is 1:30AM by me currently.

hulksjeep · 04-02-2015, 16:27

Platform: LG Qualcomm
Selected port: COM3
Selected model: D820
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-g9eb14ba ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Tue Oct 22 15:43:47 PDT 201
Android version: 4.4
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree) ARMv7 Processor rev 0 (v7l)
Initializing ADB...OK
Waiting for phone...OK
Switching to Fastboot mode...OK
Unlocking Bootloader...
Bootloader is unlocked.
Writing Bootloader...OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port...
Found model AAAAANAZ:ÿh°f at port COM79
Reading info...OK
Mode: Normal
Model ID: AAAAANAZ:ÿh°f
Firmware compiled date: Oct 01 2013
Firmware compiled time: 17:00:00
Firmware released date: Oct 11 2013
Firmware released time: 19:06:09
SW Version: M8974A-1.0.25.0.17
IMEI: 399995-92-853386-8
SPC: 000000
Selecting input file...OK
Source file: "Nexus001.qcn"
Do You want to write IMEI from QCN file
or to leave current IMEI?
Leave current IMEI!
Send SPC...OK
Writing QCN...
The ESN in QCN file and the phone do not match.
Do you still want to write this file?
Writing Roaming List 0...Canceled!

hulksjeep · 04-02-2015, 16:31

And when I use the repair QCN's this is what happens, three different devices, all different customers, so I know its not hardware

Platform: LG Qualcomm
Selected port: COM79
Selected model: D820
Reading info...OK
Mode: Normal
Model ID: AAAAANAZ:ÿh°f
Firmware compiled date: Oct 01 2013
Firmware compiled time: 17:00:00
Firmware released date: Oct 11 2013
Firmware released time: 19:06:09
SW Version: M8974A-1.0.25.0.17
IMEI: 399995-92-853386-8
SPC: 000000
Selecting input file...OK
Source file: "Repair_1.qcn"
Do You want to write IMEI from QCN file
or to leave current IMEI?
Leave current IMEI!
Send SPC...OK
Writing QCN...
The ESN in QCN file and the phone do not match.
Do you still want to write this file?
Writing EFS...OK
Writing NV_Numbered Items...OK
Writing NV_Numbered SIM1 Items...OK
Writing Provisioning Items...OK
Writing QCN done!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM3
Selected model: D820
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-g9eb14ba ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Tue Oct 22 15:43:47 PDT 201
Android version: 4.4
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree) ARMv7 Processor rev 0 (v7l)
Initializing ADB...OK
Waiting for phone...OK
Switching to Fastboot mode...OK
Unlocking Bootloader...
Bootloader is unlocked.
Writing Bootloader...OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port...
Found model AAAAANAZ:ÿh°f at port COM79
Reading info...OK
Mode: Normal
Model ID: AAAAANAZ:ÿh°f
Firmware compiled date: Oct 01 2013
Firmware compiled time: 17:00:00
Firmware released date: Oct 11 2013
Firmware released time: 19:06:09
SW Version: M8974A-1.0.25.0.17
IMEI: 399995-92-853386-8
SPC: 000000
Selecting input file...OK
Source file: "Repair_2.qcn"
Do You want to write IMEI from QCN file
or to leave current IMEI?
Leave current IMEI!
Send SPC...OK
Writing QCN...
The ESN in QCN file and the phone do not match.
Do you still want to write this file?
Writing Roaming List 0...Canceled!

jawi · 04-02-2015, 16:38

Do you still want to write this file?
when u see this msg just clk yes....

Octopus box · 04-02-2015, 17:02

We have prepared and sent You test Software version to PM. Try to write "Repair_2.qcn" with this Software version and post here full Software log.

hulksjeep · 04-02-2015, 18:05

Quote:

Originally Posted by jawi

Do you still want to write this file?
when u see this msg just clk yes....

thank you for your input, and yes, I know to still click yes to write file, as you can see the in log, when writing QCN, it kept cancelling itself out

Quote:

Originally Posted by Octopus box

We have prepared and sent You test Software version to PM. Try to write "Repair_2.qcn" with this Software version and post here full Software log.

I have tested and approved it, fixed all 3 devices, and now my customers will be very happy, thank you.

04-02-2015, 03:59	#1 (permalink)
hulksjeep Freak Poster Join Date: May 2014 Posts: 263 Member: 2188261 Status: Offline Thanks Meter: 13	d820 Need QCN writer [Solved] Tried QPST method, phone isn't detected, and tried the FTM as said in discussed method and phone will not go into that mode, please advise. Last edited by Octopus box; 04-03-2015 at 05:49.

04-02-2015, 05:48	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	What the Android firmware version is in your device now exactly?

04-02-2015, 05:51	#3 (permalink)
hulksjeep Freak Poster Join Date: May 2014 Posts: 263 Member: 2188261 Status: Offline Thanks Meter: 13	its running 4.4 kitkat

04-02-2015, 06:17	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Ok, install the lates Software version (Software), install neccessary drivers (http://octoplusbox.com/files/drivers...ile_Phones.exe, https://mega.co.nz/#!OlxHUKzC!j5qLEU..._sS4v0fK02kQUg), connect the phone, try to write QCN and post here full Software log.

04-02-2015, 16:27	#6 (permalink)
hulksjeep Freak Poster Join Date: May 2014 Posts: 263 Member: 2188261 Status: Offline Thanks Meter: 13	Platform: LG Qualcomm Selected port: COM3 Selected model: D820 Reading info... Initializing ADB...OK Waiting for phone...OK Model ID: Nexus 5 Firmware version: Kernel version: 3.4.0-g9eb14ba ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Tue Oct 22 15:43:47 PDT 201 Android version: 4.4 Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree) ARMv7 Processor rev 0 (v7l) Initializing ADB...OK Waiting for phone...OK Switching to Fastboot mode...OK Unlocking Bootloader... Bootloader is unlocked. Writing Bootloader...OK Please, wait while the phone will turn on and press "Ok" button. Trying to enable Diagnostics ports... Initializing ADB...OK Waiting for phone...OK Checking root access... Phone is already rooted. Diagnostics ports are enbled! Switching to Serial Port... Found model AAAAANAZ:ÿh°f at port COM79 Reading info...OK Mode: Normal Model ID: AAAAANAZ:ÿh°f Firmware compiled date: Oct 01 2013 Firmware compiled time: 17:00:00 Firmware released date: Oct 11 2013 Firmware released time: 19:06:09 SW Version: M8974A-1.0.25.0.17 IMEI: 399995-92-853386-8 SPC: 000000 Selecting input file...OK Source file: "Nexus001.qcn" Do You want to write IMEI from QCN file or to leave current IMEI? Leave current IMEI! Send SPC...OK Writing QCN... The ESN in QCN file and the phone do not match. Do you still want to write this file? Writing Roaming List 0...Canceled!

04-02-2015, 16:31	#7 (permalink)
hulksjeep Freak Poster Join Date: May 2014 Posts: 263 Member: 2188261 Status: Offline Thanks Meter: 13	And when I use the repair QCN's this is what happens, three different devices, all different customers, so I know its not hardware Platform: LG Qualcomm Selected port: COM79 Selected model: D820 Reading info...OK Mode: Normal Model ID: AAAAANAZ:ÿh°f Firmware compiled date: Oct 01 2013 Firmware compiled time: 17:00:00 Firmware released date: Oct 11 2013 Firmware released time: 19:06:09 SW Version: M8974A-1.0.25.0.17 IMEI: 399995-92-853386-8 SPC: 000000 Selecting input file...OK Source file: "Repair_1.qcn" Do You want to write IMEI from QCN file or to leave current IMEI? Leave current IMEI! Send SPC...OK Writing QCN... The ESN in QCN file and the phone do not match. Do you still want to write this file? Writing EFS...OK Writing NV_Numbered Items...OK Writing NV_Numbered SIM1 Items...OK Writing Provisioning Items...OK Writing QCN done! -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM3 Selected model: D820 Reading info... Initializing ADB...OK Waiting for phone...OK Model ID: Nexus 5 Firmware version: Kernel version: 3.4.0-g9eb14ba ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Tue Oct 22 15:43:47 PDT 201 Android version: 4.4 Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree) ARMv7 Processor rev 0 (v7l) Initializing ADB...OK Waiting for phone...OK Switching to Fastboot mode...OK Unlocking Bootloader... Bootloader is unlocked. Writing Bootloader...OK Please, wait while the phone will turn on and press "Ok" button. Trying to enable Diagnostics ports... Initializing ADB...OK Waiting for phone...OK Checking root access... Phone is already rooted. Diagnostics ports are enbled! Switching to Serial Port... Found model AAAAANAZ:ÿh°f at port COM79 Reading info...OK Mode: Normal Model ID: AAAAANAZ:ÿh°f Firmware compiled date: Oct 01 2013 Firmware compiled time: 17:00:00 Firmware released date: Oct 11 2013 Firmware released time: 19:06:09 SW Version: M8974A-1.0.25.0.17 IMEI: 399995-92-853386-8 SPC: 000000 Selecting input file...OK Source file: "Repair_2.qcn" Do You want to write IMEI from QCN file or to leave current IMEI? Leave current IMEI! Send SPC...OK Writing QCN... The ESN in QCN file and the phone do not match. Do you still want to write this file? Writing Roaming List 0...Canceled!

04-02-2015, 16:38	#8 (permalink)
jawi No Life Poster Join Date: Mar 2008 Location: Kanada Posts: 2,202 Member: 737720 Status: Offline Thanks Meter: 1,421	Do you still want to write this file? when u see this msg just clk yes....

04-02-2015, 17:02	#9 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	We have prepared and sent You test Software version to PM. Try to write "Repair_2.qcn" with this Software version and post here full Software log.