D821 imei repair - GSM-Forum

khanraheem143 · 04-07-2015, 12:08

Welcome to Octoplus/Octopus Box LG Software version 1.8.9
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM67
Selected model: D821
Reading info...Canceled!
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM67
Selected model: D821
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-gadb2201 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Wed Nov 20 14:42:53 PST 201
Android version: 4.4.2
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree) ARMv7 Processor rev 0 (v7l)
Initializing ADB...OK
Waiting for phone...OK
Switching to Fastboot mode...OK
Unlocking Bootloader...
Bootloader is unlocked.
Writing Bootloader...OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port...
Found model AAAAANAZ*ÿh°Ç at port COM179
Reading info...OK
Mode: Normal
Model ID: AAAAANAZ*ÿh°Ç
Firmware compiled date: Oct 01 2013
Firmware compiled time: 17:00:00
Firmware released date: Nov 19 2013
Firmware released time: 10:24:33
SW Version: M8974A-1.0.25.0.23
SPC: 000000
Fixing IMEI...
New IMEI: 354795-04-----------
Skip Read/Write QCN
Switching to Download mode...Failed!
Please perform the following steps:
1. Disconnect cable
2. Put phone into download mode manually (Power phone OFF and press and hold "Vol+" button)
3. Connect cable and press "Ok" button.
Initializing flash...OK
Reading partition...OK
Reading security area...OK
Backup saved to "D821_Bad_07-04-2015_16-21-07.SEC"
Writing security area...OK
Switching to Normal mode...
Please perform the following steps:
1. Wait while the phone will turn on
2. Reboot the phone
3. Enable "USB debugging" Mode
4. Connect the cable and check, whether ADB interface has appeared in PC Device Manager
5. Press "Ok" button.
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager.

After this mobile hang on logo

Tried with 4.4.4 and 4.4.2
with skip read/write qcn tick and untick

Help me Octopus team...

Octopus box · 04-07-2015, 12:12

Hello.

Reflash the phone again and repeat Repair IMEI operation. Carefully follow Software prompts.
Post here results and Software log of all performed operations.

khanraheem143 · 04-07-2015, 12:51

FLASHING

ROOTING

Welcome to Octoplus/Octopus Box LG Software version 1.8.9
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM180
Selected model: D821
Reading info...Failed!
Port busyFailed!
Could not detect mode!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM180
Selected model: D821
Reading info...Failed!
Port busyFailed!
Could not detect mode!
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM180
Selected model: D821
Reading info...Failed!
Port busyFailed!
Could not detect mode!
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM67
Selected model: D821
Reading info...Failed!
Could not detect mode!
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM180
Selected model: D821
Reading info...Failed!
Port busyFailed!
Could not detect mode!
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM67
Selected model: D821
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-gadb2201 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Wed Nov 20 14:42:53 PST 201
Android version: 4.4.2
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree) ARMv7 Processor rev 0 (v7l)
Initializing ADB...OK
Waiting for phone...OK
Switching to Fastboot mode...OK
Unlocking Bootloader...
Bootloader is unlocked.
Writing Bootloader...OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port...
Found model AAAAANAZ*ÿh°Ç at port COM179
Reading info...OK
Mode: Normal
Model ID: AAAAANAZ*ÿh°Ç
Firmware compiled date: Oct 01 2013
Firmware compiled time: 17:00:00
Firmware released date: Nov 19 2013
Firmware released time: 10:24:33
SW Version: M8974A-1.0.25.0.23
SPC: 000000
Fixing IMEI...
New IMEI: 357470-04-----------
Skip Read/Write QCN
Switching to Download mode...OK
Initializing flash...OK
Reading partition...OK
Reading security area...OK
Backup saved to "D821_Bad_07-04-2015_17-11-26.SEC"
Writing security area...OK
Switching to Normal mode...
Please perform the following steps:
1. Wait while the phone will turn on
2. Reboot the phone
3. Enable "USB debugging" Mode
4. Connect the cable and check, whether ADB interface has appeared in PC Device Manager
5. Press "Ok" button.
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager.Canceled!

Again same Hang on logo

and when i switch it to recovery mode bootloader is locked ..

jmr · 04-07-2015, 17:03

try this put you phone in fastboot in unlock boot by cmd type this comand

fastboot oem unlock

Octopus box · 04-07-2015, 17:07

Contact us to Skype, Yahoo! Messenger or ICQ right now, we will look remotely, where can be the problem with your device. Our contacts You can find in our profile.

khanraheem143 · 04-08-2015, 11:57

Quote:

Originally Posted by Octopus box

Contact us to Skype, Yahoo! Messenger or ICQ right now, we will look remotely, where can be the problem with your device. Our contacts You can find in our profile.

hey,
octopus team i have successfully repaired imei,
but no service ...
i have written qcn from support site but no success.

Octopus box · 04-08-2015, 12:36

To repair network, try these solutions separately:

1. Make Repair 3G/4G. Re-start the phone, insert SIM/USIM card, wait 5-7 minutes and check network.

2. Try to write these QCN files (https://mega.co.nz/#!upRAlKqQ!_tslPZ...bG_m_qf2hItp4s, https://mega.co.nz/#!PgZmkTrb!T-t13P...768SV4OqNo-GqQ). At first, write Repair_1.qcn, then write Repair_2.qcn, re-start the phone, insert SIM/USIM card, wait 5-7 minutes and check network.

3. Try to write this QCN: https://mega.co.nz/#!zxR0GRgZ!cCIaqm...3mQ_sNiFJ_QBxI, re-start the phone, insert SIM/USIM card, wait 5-7 minutes and check network.

khanraheem143 · 04-08-2015, 12:37

Quote:

Originally Posted by khanraheem143

hey,
octopus team i have successfully repaired imei,
but no service ...
i have written qcn from support site but no success.

Thanks Octopus Team,
Problem solved

D821_358240058011206_08-04-2015_16-12-21

D821_352136061963928_06-04-2015_23-47-35

Try Both QCN File
one by one and success....

04-07-2015, 12:08	#1 (permalink)
khanraheem143 Freak Poster Join Date: Aug 2009 Location: India Posts: 172 Member: 1095362 Status: Offline Thanks Meter: 70	D821 imei repair Welcome to Octoplus/Octopus Box LG Software version 1.8.9 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM67 Selected model: D821 Reading info...Canceled! -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM67 Selected model: D821 Reading info... Initializing ADB...OK Waiting for phone...OK Model ID: Nexus 5 Firmware version: Kernel version: 3.4.0-gadb2201 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Wed Nov 20 14:42:53 PST 201 Android version: 4.4.2 Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree) ARMv7 Processor rev 0 (v7l) Initializing ADB...OK Waiting for phone...OK Switching to Fastboot mode...OK Unlocking Bootloader... Bootloader is unlocked. Writing Bootloader...OK Please, wait while the phone will turn on and press "Ok" button. Trying to enable Diagnostics ports... Initializing ADB...OK Waiting for phone...OK Checking root access... Phone is already rooted. Diagnostics ports are enbled! Switching to Serial Port... Found model AAAAANAZÿh°Ç at port COM179 Reading info...OK Mode: Normal Model ID: AAAAANAZÿh°Ç Firmware compiled date: Oct 01 2013 Firmware compiled time: 17:00:00 Firmware released date: Nov 19 2013 Firmware released time: 10:24:33 SW Version: M8974A-1.0.25.0.23 SPC: 000000 Fixing IMEI... New IMEI: 354795-04----------- Skip Read/Write QCN Switching to Download mode...Failed! Please perform the following steps: 1. Disconnect cable 2. Put phone into download mode manually (Power phone OFF and press and hold "Vol+" button) 3. Connect cable and press "Ok" button. Initializing flash...OK Reading partition...OK Reading security area...OK Backup saved to "D821_Bad_07-04-2015_16-21-07.SEC" Writing security area...OK Switching to Normal mode... Please perform the following steps: 1. Wait while the phone will turn on 2. Reboot the phone 3. Enable "USB debugging" Mode 4. Connect the cable and check, whether ADB interface has appeared in PC Device Manager 5. Press "Ok" button. Initializing ADB...OK Waiting for phone... Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager. After this mobile hang on logo Tried with 4.4.4 and 4.4.2 with skip read/write qcn tick and untick Help me Octopus team...

04-07-2015, 12:12	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Hello. Reflash the phone again and repeat Repair IMEI operation. Carefully follow Software prompts. Post here results and Software log of all performed operations.

04-07-2015, 12:51	#3 (permalink)
khanraheem143 Freak Poster Join Date: Aug 2009 Location: India Posts: 172 Member: 1095362 Status: Offline Thanks Meter: 70	FLASHING ROOTING Welcome to Octoplus/Octopus Box LG Software version 1.8.9 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM180 Selected model: D821 Reading info...Failed! Port busyFailed! Could not detect mode! -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM180 Selected model: D821 Reading info...Failed! Port busyFailed! Could not detect mode! -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM180 Selected model: D821 Reading info...Failed! Port busyFailed! Could not detect mode! -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM67 Selected model: D821 Reading info...Failed! Could not detect mode! -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM180 Selected model: D821 Reading info...Failed! Port busyFailed! Could not detect mode! -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM67 Selected model: D821 Reading info... Initializing ADB...OK Waiting for phone...OK Model ID: Nexus 5 Firmware version: Kernel version: 3.4.0-gadb2201 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Wed Nov 20 14:42:53 PST 201 Android version: 4.4.2 Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree) ARMv7 Processor rev 0 (v7l) Initializing ADB...OK Waiting for phone...OK Switching to Fastboot mode...OK Unlocking Bootloader... Bootloader is unlocked. Writing Bootloader...OK Please, wait while the phone will turn on and press "Ok" button. Trying to enable Diagnostics ports... Initializing ADB...OK Waiting for phone...OK Checking root access... Phone is already rooted. Diagnostics ports are enbled! Switching to Serial Port... Found model AAAAANAZÿh°Ç at port COM179 Reading info...OK Mode: Normal Model ID: AAAAANAZÿh°Ç Firmware compiled date: Oct 01 2013 Firmware compiled time: 17:00:00 Firmware released date: Nov 19 2013 Firmware released time: 10:24:33 SW Version: M8974A-1.0.25.0.23 SPC: 000000 Fixing IMEI... New IMEI: 357470-04----------- Skip Read/Write QCN Switching to Download mode...OK Initializing flash...OK Reading partition...OK Reading security area...OK Backup saved to "D821_Bad_07-04-2015_17-11-26.SEC" Writing security area...OK Switching to Normal mode... Please perform the following steps: 1. Wait while the phone will turn on 2. Reboot the phone 3. Enable "USB debugging" Mode 4. Connect the cable and check, whether ADB interface has appeared in PC Device Manager 5. Press "Ok" button. Initializing ADB...OK Waiting for phone... Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager.Canceled! Again same Hang on logo and when i switch it to recovery mode bootloader is locked ..

04-07-2015, 17:03	#4 (permalink)
jmr No Life Poster Join Date: Oct 2007 Location: Colombia Posts: 1,812 Member: 614683 Status: Offline Sonork: 100.1605379 Thanks Meter: 370	try this put you phone in fastboot in unlock boot by cmd type this comand fastboot oem unlock

04-07-2015, 17:07	#5 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Contact us to Skype, Yahoo! Messenger or ICQ right now, we will look remotely, where can be the problem with your device. Our contacts You can find in our profile.

04-08-2015, 12:36	#7 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	To repair network, try these solutions separately: 1. Make Repair 3G/4G. Re-start the phone, insert SIM/USIM card, wait 5-7 minutes and check network. 2. Try to write these QCN files (https://mega.co.nz/#!upRAlKqQ!_tslPZ...bG_m_qf2hItp4s, https://mega.co.nz/#!PgZmkTrb!T-t13P...768SV4OqNo-GqQ). At first, write Repair_1.qcn, then write Repair_2.qcn, re-start the phone, insert SIM/USIM card, wait 5-7 minutes and check network. 3. Try to write this QCN: https://mega.co.nz/#!zxR0GRgZ!cCIaqm...3mQ_sNiFJ_QBxI, re-start the phone, insert SIM/USIM card, wait 5-7 minutes and check network.